Design and construction of large-area flexible printed-circuit automotive electrical interconnection harnesses

Abstract

The replacement of automotive wiring harnesses with large-area flexible printed circuits (FPCs) would help to reduce the vehicle weight and emissions. To help clarify what a future large-area FPC interconnection harness should be capable of, a detailed design exercise to meet the engineering specification of the instrument panel wiring harness of a specific midrange passenger car was carried out. To demonstrate the added value of using an FPC, intelligence in the form of active circuitry was incorporated in the designs.

Two generic architectural concepts were pursued. The first, a single large-area FPC, supported the wire harness geometry, all point-to-point interconnections, and current ratings up to 4 A. However, the panel size was too large to be manufactured on existing automotive FPC process lines. The second, intended to be a collection of smaller FPCs that could be manufactured on existing automotive FPC process lines, was found not to be practical as originally conceived.

A physical implementation of the single large-area FPC design was made in stages at different company sites using various pieces of equipment, some of which are not normally used for FPC or electrical circuit manufacture. Modified versions of the equipment could be used to create a large-area automotive FPC manufacturing line.

Keywords

automotive wiring harnesses large-area flexible printed circuits vehicle weight emissions

Get full access to this article

View all access options for this article.

References

Leen

Heffernan

‘Expanding automotive electronic systems.’

Computer 35 (2002): 88–93

Miller

Nicastri

‘The next generation automotive electrical power system architecture: Issues and challenges.’ In Proceedings of the 17th Digital Avionics Systems Conference (DASC 1998), Seattle, Washington, USA, 31 October—7 November 1998, pp. I15/1–I15/8 (IEEE, New York).

‘Results of the review of the Community Strategy to reduce CO₂ emissions from passenger cars and light-commercial vehicles.’ Communication from the Commission to the Council and the European Parliament, COM(2007) 19 final, {SEC(2007) 60}, {SEC(2007) 61}, Commission of the European Communities, Brussels, 2007.

BBC News, US Senate seeks fuel efficiency, 2008, available from http://news.bbc.co.uk/1/hi/world/americas/6229114.stm (access date 14 January 2008).

Lindahl

B. R.

‘Opportunities for integration with flexible circuitry in instrumentation displays.’ SAE paper 950961, 1995.

Astler

‘New connections for automobiles.’

Automot. Engng Int. 109 (2001): 77–80

Cottrill

M. C. W.

Jaggernauth

W. A.

Webb

D. P.

Palmer

P. J.

Conway

P. P.

West

A. A.

‘Foresight vehicle: Large area flexible circuits for automotive applications manufacturing technology, a review of process options.’ SAE paper 2002–01-1127, 2002.

Carrott

A. J.

West

A. A.

Conway

P. P.

Cottrill

M. C. W.

‘Business case modelling of large area flexible circuits in the foresight vehicle program.’ SAE paper 2002–01-1128, 2002.

Jaggernauth

W. A.

Webb

D. P.

Cottrill

M. C. W.

Palmer

P. J.

Conway

P. P.

West

A. A.

‘Foresight vehicle: Specification and acceptability criteria for copper-clad dielectric materials used in large automotive flexible printed circuits.’ SAE paper 2002–01-1129, 2002.

10.

Webb

D. P.

Cottrill

M. C. W.

Jaggernauth

W. A.

West

A. A.

Palmer

P. J.

Conway

P. P.

‘Foresight vehicle: Physical media for automotive multiplex networks implemented on large area flexible printed circuit boards.’ SAE paper 2002–01-1130, 2002.

11.

Webb

D. P.

Jaggernauth

W. A.

Cottrill

M. C. W.

West

A. A.

Conway

P. P.

Palmer

P. J.

‘Electromagnetic compatibility performance of large area flexible printed circuit automotive harness.’

Proc. IMechE, Part D: J. Automobile Engineering 218 (7) (2004): 667–673 DOI: 10.1243/0954407041580102.

12.

Jennings

Ball

Lever

‘Using statistics to reduce the uncertainty in system level susceptibility testing.’ In Symposium Record of the IEEE 1995 International Symposium on Electromagnetic compatibility, Atlanta, Georgia, USA, 14–18 August 1995, pp. 47–50 (IEEE, New York).

13.

F. M.

Ritchie

J. M.

Simmons

J. E. L.

‘The design and planning of cable harness assemblies.’

Proc. IMechE, Part B: J. Engineering Manufacture 214 (10) (2000): 881–890 DOI: 10.1243/0954405001517964.

14.

Engbring

Renner

‘Optimized design of flat wiring systems.’ SAE paper 2003–01-0228, 2003.

15.

‘BS AU 88a:1985. Recommendations for ratings for light duty cables for automobile use,’ 1985 pp. 1–4 (British Standards Institution, London).

16.

Kassakian

J. G.

Wolf

Miller

J. M.

Hurton

C. J.

‘The future of automotive electrical systems.’. In Proceedings of the IEEE Workshop on Power electronics in transportation, Dearborn, Michigan, USA, 24–25 October 1996, pp. 3–12 (IEEE, New York).

17.

Fujisaki

Samitsu

‘Development of flexible flat cable harnesses for automobile roof modules.’

Furukawa Rev. 21 (2002): 87–91

18.

‘ISO 11898:1993(E). Road vehicles — interchange of digital information — controller area network (CAN) for high-speed communication,’ (International Organization for Standardization

Geneva

1993).

19.

Grigoriev

Panchak

‘The comparative analysis of automatic trace routing in PCAD and OrCAD.’. In Proceedings of the Second International Conference on Perspective technologies and methods in MEMS design (MEMSTECH 2006), Lviv, Ukraine, 24–27 May 2006, pp. 143–145 (IEEE, New York)

20.

Edwards

K. L.

‘Strategic substitution of new materials for old: Applications in automotive product development.’

Mater. Des. 25 (2004): 529–533

21.

Freudenberg & Co., Freudenberg at the IAA, 2005, available from http://www.freudenberg.com/ecomaXL/index.php?site5FCO_en_topthema_detail&udtx_id51701 (access date 20 February 2009).