Stress intensity factors are found for cracks arising in an elastic layer, perfectly bonded to an elastic substrate and propelled by surface contact loading, in a range of different distributions. In each case the loading is normal or very nearly normal, with only a modest frictional shearing force present. It is shown that the most favoured regions for crack growth, i.e. where tension occurs, are adjacent to the interface (at 45°) and normal to the free surface, based on the assumption that cracks grow mainly in mode I.
HearleA. D.JohnsonK. L.Mode II stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point loadJ. Mech Phys. Solids, 1985, 33, 61–81.
2.
KeerL. M.BryantM. D.HaritosG. K.Subsurface cracking and delamination. In Solid Contact and Lubrication, 1980, pp. 79–95 (American Society of Mechanical Engineers, New York).
3.
KeerL. M.BryantM. D.HaritosG. K.Subsurface and surface cracking due to Hertzian contact. Trans. ASME, J. Lubrk. Technol, 1982, 104, 347–351.
4.
KeerL. M.BryantM. D.A pitting model for rolling contact fatigue. Trans. ASME, J. Lubric. Technol., 1983, 105, 198–205.
KeerL. M.MeadeK. P.A note on a no-slip interface crack. J. Appl Mech, 1982, 49, 454–455.
7.
HillsD. A.NowellD. A.SackfieldA.Mechanics of Elastic Contact, 1993 (Butterworth-Heinemann, Oxford).
8.
BentallR.JohnstonK. L.An elastic strip in plane rolling contact. Int. J. Mech Sci., 1968, 10, 637–663.
9.
NowellD.HillsD. A.Contact problems incorporating elastic layers. Int. J. Solids and Structs, 1988, 24, 105–115.
10.
SneddonI. N.Fourier Transforms, 1951 (McGraw-Hill, New York).
11.
KellyP. A.O'ConnorJ. J.NowellD.The use of Fourier transform theory in solving the two dimensional problem of an elastic layer in contact with or perfectly bonded to a substrate, suffering contact loading or containing a dislocation. University of Oxford internal report OUEL 1979/93, 1993.
12.
BuecknerH. F.The propagation of cracks and the energy of elastic deformation. Trans. ASME, 1958, 80, 1225–1230.
13.
HillsD. A.KellyP.A.DaiD. N.KorsunskyA. M.Solution of Crack Problems: The Distributed Dislocation Technique, 1996 (Kluwer Academic Publishers, Dordrecht, Netherlands).
14.
BallariniR.LuoH. A.Green's functions for dislocations in bonded strips and related crack problems. Int. J. Fract., 1991, 50, 239–262.
15.
LuH.LardnerT. J.Mechanics of subinterface cracks in layered material. Int. J. Solids and Structs, 1992, 29, 669–688.
16.
KellyP. A.O'ConnorJ. J.HillsD. A.The stress field due to a dislocation in layered media. J Phys., Part D: Appl Physics, 1995, 28, 530–534.
17.
ErdoganF.GuptaG. D.CookT. S.Numerical solution of singular integral equations. In Methods of Analysis and the Solution of Crack Problems (Ed. SihG. C.), 1973, pp. 368–425 (Leydon, Noordhoff).
