In this paper, optimization of the local cam profile of a valve train modelled by a parameterized Bezier curve is described. Dynamic responses of the valve train are simulated through its multi-body system dynamics model built using ADAMS software. The kriging method is used to build the surrogate model, which presents the relationship between dynamic responses resulting from the multi-body system dynamics simulation and the parameters of the local Bezier profile. The local cam profile is optimized through a generic algorithm, such that the acceleration peak at the valve open phase is reduced significantly.
ZhangX. Q.QianZ. L.YangZ.Optimal design of cam profile by means of non-uniform B-spline curve. J. Mach. Des., 200421(1), 40–42.
3.
ChewM.ChuangC. H.Minimizing residual vibrations in high-speed cam-follower system over a range of speeds. Trans. ASME J. Mech. Des., 1995, 117, 166–172.
4.
LongL. C.Ma HuZ. S.ZhangL. P.SuiG. G.SuiY. K.Construction and optimization design of a combined polynomial cam profile for avoiding collision. Trans. CSICE, 200220(2), 171–175.
5.
LiZ.LiZ. S.LouY.G.Dynamic simulation of distribution cam mechanism in internal combustion engine based on ant colony algorithm. Trans. CSAE, 2005, 21(6), 64–67.
6.
LiZ.SunJ. B.LouY. G.Dynamical optimization design of distribution cam mechanism in internal combustion engine based on immune genetic algorithm. J. Vib. Shock, 2005, 24(6), 68–70.
7.
QiuH.LinC.J.LiZ.Y.OzakiH.WangJ.YueY.A universal optimal approach to cam curve design and its applications. Mech. Mach. Theory, 2005, 10(6), 669–692.
8.
KushwahaM.RahnejatH.Johns-RahnejatP.M A tribo-multibody model for valve train kinematic analysis, quasi-statics of lubricated contact and assessment of structural integrity. In Proceedings of the International North American ADAMS User Conference, Ypsilanti, Michigan, 1997, available from https://dspace.lboro.ac.uk/dspace-jspui/bitstream/2134/5884/1/kushwaha.pdf (American MDI Corporation).
9.
MclaughlinS.HaqueI.Development of a multi-body simulation model of a Winston Cup valvetrain to study valve bounce. Proc. ImechE Part K: J. Multi-body Dynamics, 2002, 216, 237–248.
10.
LiaoQ.M.ZhangC.Y.Research on virtual prototype technic of valve train system in internal combustion engines. Neranji Gongcheng, 2003, 24(3), 23–26.
11.
ZhangX. R.SongC. S.WuJ. Y.ZhuC. C.A research on rigid-flexible coupling dynamics of engine valve-trai.’Autom. Eng., 2009, 31(2), 118–122.
12.
YuQ.LeeH. P.A new family of parameterized polynomials for cam motion synthesis’Trans. ASME, J. Mech. Des., 1995, 117(4), 653–655.
13.
NeamtuM.PottmannH.SchumakerL. L.Designing NURBS cam profiles using trigonometric splines. Trans. ASME J. Mech. Des., 1998, 120(2) 175–180.
14.
SunJ. G.XuL. W.Computer graphics, 1986 (Tsinghua University PressBeijing, China).
15.
VoutchkovI.KeaneA.J.FoxR.Robust structural design of a simplified jet engine model, using multiobjective optimization. In Proceedings of the Collection of Technical Papers - 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, USA, 6–8 September 2006, vol.2, pp. 1080–1092(AIAA).
16.
LiK. H.KangD. H.Structural optimization of an automotive door using the kriging interpolation method. Proc. IMechE, Part D: J. Automobile Engineering, 2007, 221, 1525–1534 DOI: 10.1243/09544070JAUTO403.
17.
GaoY.H.ZhangQ.WangX.C.Dynamic optimization design of the turbine frame foundation using kriging model. Chin. J. Comput. Mech., 2008, 25(5), 610–615.
18.
DuY.J.XiaoD.Y.Application analysis of kriging in the calculation of temperature field’J. Comp. Aided Des. Comp. Graph., 2004, 16(8), 1153–1158.
19.
SacksJ.WelchW. J.MitchellT. J.WynnH. P.Design and analysis of computer experiments. Stat. Sci., 1989, 4(4), 409–435.
20.
LophavenS. N.NielsenH. B.SøndergaardJ.DACE (a Matlab kriging toolbox). Technical Report IMMTR-2002-12, Technical University of Denmark, Copen-hagen, Denmark, 2002.
