A novel method for the dynamic synthesis of cam mechanisms with an imposed driving force profile

Abstract

In the car industry, the ergonomic and haptic properties of controls are gaining high priority. The cam mechanisms of switches and knobs, such as those of car turn switches, are usually required to comply with a certain user force profile, according to human physical limitations and ergonomic requirements. In order to fine-tune the force input and the function performed by the mechanism, the cam profile is normally subjected to a detailed synthesis having as input the desired user force profile. Nevertheless, conventional cam synthesis and analysis methods do not provide an adequate tool for designing the cam profile based on the required driving effort. In this article, an energy-based method is proposed for designing a cam mechanism able to accurately replicate the desired profile of the driving effort. According to the proposed method, the cam profile is determined as a finite series of points and takes into consideration all contact forces between the cam and the follower, including friction. The method is non-linear, considering a combined Stribeck—Therfall friction model as well as the damping of the system. Numerical validation is provided considering the case of the cam mechanism of a conventional car turn switch.

Keywords

cam design cam mechanism cam profile driving force profile energy-based calculation finite series

Get full access to this article

View all access options for this article.

References

Rothbart

H. A.

, Cam design handbook (New York: McGraw-Hill 2004).

Shigley

J. E.

Mischke

C. R.

Brown

T. H.

, Standard handbook of machine design (New York: McGraw-Hill 2004).

Sandler

B. Z.

, Robotics â€“ designing the mechanisms for automated machinery (San Diego, California: Academic Press 1999).

Alexandru

Talaba

Alexandru

, Functional design of mechanisms (in Romanian) (Brasov: Lux Libris Press 2000).

Norton

, Design of machinery. Introduction to the synthesis and analysis of mechanisms and machines (New York: McGraw-Hill 1992).

Burnett

G. E.

Porter

J. M.

, ‘Ubiquitous computing within cars: Designing controls for non-visual use’ Int. J. Hum. Comput. Stud. 55 4 (2001): 521–531.

Moreau

Fuchs

Stergiopoulos

, ‘Applications of virtual reality in the manufacturing industry: From design review to ergonomic studies’ Mecanique Ind. 5 2 (2004): 171–179.

Weir

D. W.

Peshkin

Colgate

J. E.

, ‘The haptic profile: Capturing the feel of switches’ In Proceedings of the IEEE 12th International Symposium on Haptic interfaces for virtual environment and teleoperator systems (HAPTICS 2004), Chicago, IL, 27–28 March 2004, pp. 186–193.

MacLean

K. E.

, ‘Haptic camera: A technique for characterizing and playing back haptic properties of real environments’ In Proceedings of the ASME Dynamic Systems and Control Devision, Atlanta, GA, 1996, pp. 245–252.

10.

Colton

M. B.

Hollerbach

J. M.

, ‘Reality-based haptic force models of buttons and switches’ In Proceedings of the IEEE International Conference on Robotics and automation (ICRA ’07), Rome, Italy, 10–14 April 2007, pp. 497–502.

11.

Colton

M. B.

Hollerbach

J. M.

, ‘Haptic models of an automotive turn-signal switch: Identification and playback results’ In Proceedings of the WorldHaptics 2007: Second Joint EuroHaptics Conference and IEEE Symposium on Haptic interfaces for virtual environments and teleoperator systems, Tsukuba, Japan, 22–24 March 2007, pp. 243–248.

12.

Erdelyi

Antonya

Cs.

Talaba

, ‘Haptic feedback generation for a car direction indicator switch’ In ASI on: Product engineering: Tools and methods based on virtual reality (series: Intelligent systems, control and automation: Science and engineering) (Berlin: Springer 2007): 257–273.

13.

Mathew

G. K.

Tesar

, ‘Cam system design: The dynamic synthesis and analysis of the one degree of freedom model’ Mech. Mach. Theory 11 (1976): 247–257.

14.

Lederer

, ‘Dynamische synthese der ã¼bertagungsfunktion eines kurvengetriebes’ Mech. Mach. Theory 28 (1993): 23–29.

15.

Kreith

, Mechanical engineering handbook (Boca Raton, Florida: CRC Press 1999).

16.

Talaba

, Articulated mechanisms. Computer aided design (in Romanian) (Brasov: Transilvania University Publisher 2001).

17.

Rooney

G. T.

Deravi

, ‘Coulomb friction in mechanism sliding joints’ Mech. Mach. Theory 17 (1982): 207–211.

18.

Threlfall

D. C.

, ‘The inclusion of coulomb friction in mechanisms programs with particular reference to DRAM’ Mech. Mach. Theory 13 (1978): 475–483.

19.

Andersson

Sã¶derberg

Bjã¶rklund

, ‘Friction models for sliding dry, boundary and mixed lubricated contacts’ Tribol. Int. 40 4 (2006): 580–587.