Sage Journals: Discover world-class research

Abstract

In this study, the effect of air oxidation and ozone surface treatment of carbon fibres (CFs) on tribological properties of CF-reinforced polytetrafluoroethylene (PTFE) composites under oil-lubricated condition was investigated. Experimental results revealed that ozone-treated CF-reinforced PTFE (CF/PTFE) composite had the lowest friction coefficient and wear compared with untreated and air-oxidated composites. An X-ray photoelectron spectroscopy study of the CF surface showed that, after ozone treatment, oxygen concentration was obviously increased, and the amount of oxygen-containing groups on CF surfaces was largely increased. The increase in the amount of oxygen-containing groups enhanced interfacial adhesion between CF and PTFE matrix. With strong interfacial adhesion of the composite, CFs were strongly bonded with PTFE matrix, and large-scale rubbing-off of PTFE was prevented; therefore, the tribological properties of the composite was improved.

Keywords

carbon fibre/polytetrafluoroethylene composites surface treatment ozone tribological properties oil lubrication

Get full access to this article

View all access options for this article.

References

Yue

Z. R.

Jiang

Wang

Gardner

S. D.

Pittman

C. U.

, ‘Surface characterization of electrochemically oxidized carbon fibers’ Carbon 37 (1999): 1785–1796.

Lee

J. S.

Kang

T. J.

, ‘Changes in physico-chemical and morphological properties of carbon fiber by surface treatment’ Carbon 35 (1997): 209–216.

Choi

M. H.

Jeon

B. H.

Chung

I. J.

, ‘The effect of coupling agent on electrical and mechanical properties of carbon fiber/phenolic resin composites’ Polymer 41 (2000): 3243–3252.

Wang

Lin

Polineni

V. K.

Essner

Stark

Dumbleton

J. H.

, ‘Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement’ Tribol. Int. 31 (1998): 661–667.

Chang

Bellare

Cohen

R. E.

Spector

, ‘Wear behavior of bulk oriented and fiber reinforced UHMWPE’ Wear 241 (2000): 109–117.

Drzal

L. T.

Madhukar

, ‘Fiber—matrix adhesion and its relationship to composite mechanical properties’ J. Mater. Sci. 28 (1993): 569–610.

Huang

Y. D.

Qiu

J. H.

Liu

L. X.

Zhang

Z. Q.

, ‘The uniform treatment of carbon fiber surface in three-directional orthogonal fabric by oxygen-plasma’ J. Mater. Sci. 38 (2003): 759–766.

Dillon

Thomas

K. M.

Marsh

, ‘The influence of matrix microstructure on mechanical properties of CFRC composites’ Carbon 31 (1993): 1337–1342.

Wang

Z. M.

Yamashita

Wang

Z. X.

, ‘Air oxidation effects on microporosity, surface property, and CH₄ adsorptivity of pitch-based activated carbon fibers’ J. Colloid Interface Sci. 276 (2004): 143–151.

10.

Fukunaga

Ueda

Nagumo

, ‘Air-oxidation and anodization of pitch-based carbon fibers’ Carbon 37 (1999): 1081–1089.

11.

Lakshminarayanan

P. V.

Toghiani

Pittman

C. U.

, ‘Nitric acid oxidation of vapor grown carbon nanofibers’ Carbon 42 12–13 (2004): 2433–2442.

12.

Shim

Park

Ryu

, ‘Effect of modification with HNO₃ and NaOH on metal adsorption by pitch-based activated carbon fibers’ Carbon 39 11 (2001): 1635–1645.

13.

Toebes

M. L.

van Heeswijk

J. M. P.

Bitter

J. H.

van Dillen

A. J.

de Jong

K. P.

, ‘The influence of oxidation on the texture and the number of oxygen-containing surface groups of carbon nanofibers’ Carbon 42 2 (2004): 307–312.

14.

Fukunaga

Ueda

Nagumo

, ‘Air-oxidation and anodization of pitch-based carbon fibers’ Carbon 37 (1999): 1081–1085.

15.

Lee

J. S.

Kang

T. J.

, ‘Changes in physico-chemical and morphological properties of carbon fiber by surface treatment’ Carbon 35 (1997): 209–216.

16.

Yang

Y. G.

Wang

M. Z.

Z. J.

Zhang

B. J.

, ‘The oxidation of PAN-based carbon fiber (in Chinese)’ Carbon Technol. 6 (1997): 12.

The effect of carbon fibre surface oxidation on the friction and wear properties of polytetrafluoroethylene composites under oil-lubricated conditions

Abstract

Abstract

Keywords

Get full access to this article

References