Thorough and systematic investigations are performed into the meshing principium of generating a cylindrical gear by an Archimedes hob based on the two-degree-of-freedom theory of gearing geometry. The numerical examples show the verification and validation of the formulated principium and the developed model. Conclusions suitable for industrial application are reached by means of numerical simulations.
LiH.HanY.WangZ., Geometrical principium and calculation of involute gearing (Beijing: Mechanical Industry Press1986) (in Chinese).
2.
LitvinF. L., Gear geometry and applied theory (Englewood Cliffs, NJ: Prentice-Hall1994).
3.
DudleyD. W., Gear handbook: The design, manufacture, and application of gears (New York: McGraw-Hill1962).
4.
LitvinF. L., ‘Development of gear technology and theory of gearing’, (NASA Reference Publication 1406 1997).
5.
LitvinF. L.FuentesA., Gear geometry and applied theory (Cambridge, UK: Cambridge University Press2004).
6.
LitvinF. L.KrylovN. N.ErichovM. L., ‘Generation of tooth surfaces by two-parametric enveloping’Mech. Mach. Theory10 (1975): 365–373.
7.
ChenW., Theory of gear meshing (Beijing: Coal Industry Press1986) (in Chinese).
8.
WuX., Principle of gear meshing (Beijing: Mechanical Industry Press1982) (in Chinese).
9.
DongX., ‘Researches on gear meshing with two degrees of freedom, part II (in Chinese)’Gearing151 (1991): 1–6.
10.
RadzevichS. P., Kinematic geometry of surface machining, (Taylor & Francis Group, CRC Press2008).
11.
DongX.LiH.WeiW., ‘Meshing theory and design of involute gear pair with variable shaft angle’Chin. J. Mech. Eng.447 (2008): 79–84 (in Chinese).
12.
DaryaniP. H., The art of gear fabrication (New York: Industrial Press Inc.2001).
13.
Theoretical foundation for designing gear cutting tools (Beijing: Mechanical Industry Press1982) (in Chinese).
14.
YuanZ.LiuH.TangY., Design of gear cutting tools (Beijing: New Times Press1983) (in Chinese).
15.
DongX., Theoretical foundation of gear meshing (Beijing: Mechanical Industry Press1989) (in Chinese).
16.
OpreaJ., Differential geometry and its applications (Englewood Cliffs, NJ: Prentice-Hall2003).
17.
WuD.LuoJ., A geometric theory of conjugate tooth surfaces (Singapore: World Scientific1992).
18.
ZhaoY.WeiW.DongX., ‘Some problems on the 2DOF theory of gearing’Mech. Mach. Theory43 (2008): 1024–1037.
19.
LitvinF. L.SeolI. H., ‘Computerized determination of gear tooth surface as envelope to two parameter family of surfaces’Comput. Methods Appl. Mech. Eng.138 (1996): 213–225.
