In this article, a new kind of linear actuator for the deep-sea sampling valve has been described. Based on the working principle of the triggering ring, the actuator employs a preloaded spring to generate an output force and linear movement. The actuator is designed to be used 4000 m underwater and can produce a force of 510 N at the maximal output displacement of 3.5 mm, which can be easily modified by changing the preloaded spring and spring seats. The actuator has been successfully tested to actuate the sampling valve at an ambient pressure of 40 MPa.
ShinD. D.MohanchandraK. P.CarmanG. P., ‘Development of hydraulic linear actuator using thin film SMA’ Sens. Actuators A119 (2005): 151–156.
2.
WhiteS. N.KirkwoodW.ShermanA.BrownM.HenthornR.SalamyK.WalzP.PeltzerE. T.BrewerP. G., ‘Development and deployment of a precision underwater positioning system for in situ laser Raman spectroscopy in the deep sea’ Deep-sea Res. I52 (2005): 2376–2389.
3.
Von DammK. L.EdmondJ. M.GrantB.MeasuresC. I.WaldenB.WeissR. F., ‘Chemistry of submersible hydrothermal solutions at 21 °N, East Pacific Rise’ Geochim. Cosmochim. Acta49 (1985): 2197–2220.
4.
SeewaldJ. S.DohertyK. W.HammarT. R.LiberatoreS. P., ‘A new gas-tight isobaric sampler for hydrothermal fluids’ Deep-sea Res. I49 (2002): 189–196.
5.
ChenY.WuS. J.XieY. J.YangC. J.ZhangJ. F., ‘A novel mechanical gas-tight sampler for hydrothermal fluids’ IEEE J. Ocean. Eng.323 (2007): 603–608.
KreithF.BohnM. S., The principles of heat transfer (St Paul, MN: West Publishing Co.1993): 720-.
10.
HildmannB.SchneiderH., ‘Heat capacity of mullite: New data and evidence for a high-temperature phase transformation’ J. Am. Ceram. Soc.872 (2004): 227–234.
11.
SchneiderH.SchreuerJ.HildmannB., ‘Structure and properties of mullite — a review’ J. Eur. Ceram. Soc.282 (2008): 329–344.
12.
LasanceC. J. M.VinkeH.RostenH., ‘Thermal characterization of electronic devices with boundary condition independent compact models’ IEEE Trans. Compon. Packag. Manuf. Technol., Part A184 (1995): 723–731.
