By extending the stochastic averaging techniques for lubricated rough surface contacts, as developed by Christensen and Tønder, a simple analytical transformation is derived to obtain the pressure flow factors for a non-Gaussian roughness whenever the corresponding Gaussian factors are known. The method is compared with results from numerical solutions available in the literature and it shows good agreement.
ChristensenH., ‘Stochastic models for hydrodynamic lubrication of rough surfaces’ Proc. Instn Mech. Engrs18455 (1969, 1970): 1013–1022 Pt 1.
2.
ChristensenH.TønderK., ‘The hydrodynamic lubrication of rough bearing surfaces of finite width’ Trans. ASME, J. Lubr. Technol.933 (1971): 324–330.
3.
JohnsonK. L.GreenwoodJ. A.PoonS., ‘A simple theory of asperity contact in elastohydrodynamic lubrication’ Wear19 (1971): 91–108.
4.
PatirN.ChengH. S., ‘An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication’ Trans. ASME, J. Lubr. Technol.100 (1978): 12–17.
5.
PatirN.ChengH. S., ‘Application of average flow model to lubrication between rough sliding surfaces’ Trans. ASME, J. Lubr. Technol.101 (1979): 220–230.
6.
ElrodH. G., ‘A general theory for laminar lubrication with reynolds roughness’ Trans. ASME, J. Lubr. Technol.101 (1979): 8–14.
7.
TrippJ. H., ‘Surface roughness effects in hydrodynamic lubrication: The flow factor method’ Trans. ASME, J. Lubr. Technol.105 (1983): 458–465.
8.
BayadaG.ChambatM., ‘New models in the theory of the hydrodynamic lubrication of rough surfaces’ ASME, J. Tribol.110 (1998): 402–407.
9.
PeekenH. J.KnollG.RienäckerA.LangJ.SchönenR., ‘On the numerical determination of flow factors’ ASME, J. Tribol.119 (1997): 259–264.
10.
KnollG.RienäckerA.LagemannV.Lechtape-GrüterR., ‘Effect of contact deformation on flow factors’ ASME, J. Tribol.120 (1998): 140–142.
11.
KimT. W.ChoY. J., ‘The flow factors considering the elastic deformation for the rough surface with a non-Gaussian height distribution’ Tribol. Trans.51 (2008): 213–220.
12.
WhitehouseD. J., Handbook of surface metrology (London: IOP Publishing Ltd1994).
