This article proposes an uncommon follower, a concave-faced follower, for a disc cam mechanism and also presents an analytical approach for determining the cam profile. A disc cam mechanism with a concave-faced follower can have the advantage of lower contact stress over that with a flat-faced follower. Two examples are provided to illustrate the nature and capability of reducing contact stress of this uncommon follower.
CollinsJ. A., Mechanical design of machine elements and machines (New York: John Wiley & Sons2003): 234–237 288–289, 383–405.
2.
NortonR. L., Cam design and manufacturing handbook (New York: Industrial2002, pp. 5–6 358–363.
3.
RothbartH. A., Cam design handbook (New York: McGraw-Hill2004, pp. 4–5 256–260.
4.
WaldronK. J.KinzelG. L., Kinematics, dynamics, and design of machinery (New York: John Wiley & Sons1999, pp. 333–334.
5.
CarraS.GarzieraR.PellegriniM., ‘Synthesis of cams with negative radius follower and evaluation of the pressure angle’ Mech. Mach. Theory3910 (2004): 1017–1032.
6.
HansonR. S.ChurchillF. T., ‘Theory of envelopes provides new cam design equations’ Prod. Eng. (1962): 45–55.
7.
DavidsonJ. K., ‘Calculating cam profiles quickly’ Mach. Des. (1978): 151–155.
8.
WuL.-I., ‘Calculating conjugate cam profiles by vector equations’ Proc. IMechE, Part C: J. Mechanical Engineering Science217 C10 (2003): 1117–1123 DOI: 10.1243/095440603322517135.
9.
Rees-JonesJ., ‘Mechanisms, cam curvature and interference’ Engineering (1978): 460–463.
10.
ChenF. Y., Mechanics and design of cam mechanisms (New York: Pergamon Press1982, pp. 185–192.
11.
JensenP. W., Cam design and manufacture2nd edition, (New York: Marcel Dekker1987, pp. 146–149.
