Water and an aqueous glycerine solution were used to obtain liquids with nominal viscosities of 1 and 550 mPa s. These fluids were used to obtain friction factors for pipe flows, discharge coefficients for orifice plates and nozzles, and loss coefficients for an abrupt enlargement, a nozzle, an orifice plate, and a globe valve in the Reynolds number range 10-200. Existing methods are shown to be adequate for the prediction of friction factors and discharge coefficients, but inadequate for the prediction of loss coefficients. Insight is given into the flow behaviour that is associated with the loss coefficients.
MasseyB. S.Mechanics of Fluids, 3rd edition, 1975 (Van Nostrand Reinhold, New York).
2.
ChisholmD.Two-phase Flow in Pipelines and Heat Exchangers, 1983 (Goodwin, London).
3.
McNeilD. A.MorrisS. D.Literature review on highly-viscous flow. Report EUR 16107 EN, Joint Research Centre, 1994.
4.
McNeilD. A.AddleseeA. J.StuartA. D.Newtonian and non-Newtonian viscous flows in nozzles. Proc. Instn Mech. Engrs. Part C: J. Mechanical Engineering Science, 2000, 214, 1425–1436.
5.
AlviS. H.SridharanK.Lakshmana RaoN. S.Loss characteristics of orifices and nozzles. Trans. ASME. J. Fluids Engng, 1978, 100, 299–307.
6.
McNeilD. A.AddleseeA. J.StuartA. D.An experimental study of viscous flows in contractions. J. Loss Prevention Process Industry, 1999, 12, 249–258.
7.
McNeilD. A.A mechanistic approach to laminar flow through an abrupt enlargement. Proc. Instn Mech. Engrs. Part C: J. Mechanical Engineering Science, 1988, 212, 237–245.
8.
EdwardsM. F.JadallahM. S.M. and Smith, R. Head losses in pipeline fittings. Chem. Eng. Res. Des., 1985, 63, 43–50.
9.
HooperW. B.Calculation of head loss caused by change in pipe size. Chem. Engng, November 1988, 89–92.
10.
HooperW. B.The two-k method predicts head losses in pipe fittings. Chem. Engng, August 1981, 96–100.
11.
IdelchikI. E.Handbook of Hydraulic Resistance, 2nd edition, 1986, (Hemisphere, New York).
