A new metal forming process is described in which a slender part may be brought to a prescribed final shape by means of an appropriate, pre-calculated motion of its free ends only. Corresponding calculation schemes are presented for elastic/plastic material with strain hardening, and these are illustrated by practical examples.
Lippmann H..Free rigid/plastic bending of a slender beam.Ing. Arch.. 1990;60:293-302
2.
Reigl M.,Lippmann H.,Mannl V.Flexibel Umformtechnik. Mainz: Deutsche Forschungs-gemeinschaft, Wissenschaftsverlag; 1995:1-15.
3.
Huang X.,Yu T. X.,Lu G.,Lippmann H..Large deflection of elastoplastic beams under prescribed moving and rotating ends.Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science. 2003;217 (C9): 1001-1013
4.
Thalmair M.,Lippmann H..Spatial free plastic forming of slender parts—fundamental relations and first example.Int. J. Mech. Sci.. 2000;42:1851-1865
5.
Thalmair M.,Lippmann H.,Reigl M..Spatial free plastic forming of slender parts—machine design, forming limits, and application.Trans. ASME, J. Engng Mater. Technol.. 2001;123:524-529
6.
Hill R..Constitutive dual potentials in classical plasticity.J. Mech. Phys. Solids. 1987;35:23-33
7.
Blaschke W.Introduction to Differential Geometry. Berlin, Germany: Springer-Verlag; 1950:
