Stress in V-section band clamps

Abstract

This paper presents an analysis of the stresses in V-section band clamps by examining the correlation between experimental work and theoretical models. Theoretical models incorporating traditional beam-bending theories and allowing for friction were developed to calculate the stress distribution and displacements within the clamps. The theoretical models demonstrated that the normal manufacturing tolerances associated with this type of component, combined with the uncontrolled operating parameters, will produce a wide variation in working stresses.

These theoretical models were validated using strain and displacement measurements from a test with a V-section band clamp positioned around rigid flanges. The experimental results all fell within the range of stresses predicted by the theoretical models. The paper provides a knowledge base for the rational design of V-section band clamps.

Keywords

V-clamp Marman clamp clamp band friction T-bolt

Get full access to this article

View all access options for this article.

References

Hudson

V-clamps solve flange coupling problems. Diesel Engineering, Winter 1977, 203–204.

Mounthford

Design of clamp joints. Engineering Designer, January 1980, 37–40.

Stavrinidis

Klein

Brunner

Newerla

Technical and programmatic constraints in dynamic verification of satellite mechanical systems. Acta Astronautica, 1996, 38(1), 25–31.

Lin

C. S.

Cole

T. R.

Dynamic model for global positioning system block IIR space vehicle. J. Spacecraft and Rockets, 1997, 34(3), 354–359.

Marman clamp system design guidelines, Guideline GD-ED-2214, NASA Goddard Space Flight Centre, 2000.

Lancho

Larrauri

Gomez-Molinero

CRSS: A separation system for launching very heavy payloads. Acta Astronautica, 2000, 47, 153–162.

Takeuchi

Onoda

Estimation of separation shock of the Marmon clamp system by using a simple band-mass model. Trans. Japan Soc. Aero. Space Sci., 2002, 45(147), 53–60.

Shoghi

Rao

H. V.

Barrans

S. M.

Stress in flat section band clamp. Int. J. Mech. Sci., 2003, 217(C), 821–830.

Hearn

E. J.

Mechanics of Materials, 1985, Vol. 1, pp. 266–292 (Pergamon Press, Oxford).

10.

Shoghi

Barrans

S. M.

Rao

H. V.

Classical and finite element analysis of V-band retainers. In NAFEMS World Congress, Orlando, Florida, 2003.

11.

Redford

G. D.

Rimmer

J. G.

Titherington

Mechanical Technology, 2nd edition. 1977, p. 108 (Macmillan Press, London).

12.

Hearn

E. J.

Mechanics of Materials, 1985, Vol. 1, pp. 361–382 (Pergamon Press, Oxford).

13.

Monaghan

J. M.

The influence of lubrication on the design of yield tightened joints. J. Strain Analysis, 1991, 26(2), 124–129.