The influence of interfacial friction on the contact between a pin and an almost conforming hole is considered. The technique is developed from the fundamental two-dimensional solution for a line force in an infinite plane, using distributed strain nuclei to model both separation and slip. This provides a numerically efficient solution for the problem, and enables the local subsurface stress to be found which, in turn, governs the crack initiation environment.
LinS.HillsD. A.NowellD.Stresses in a flat plate due to a loose pin pressing against a cracked hole. J. Strain Analysis, 1997, 32(2), 145–156.
2.
CiavarellaM.DecuzziP.The state of stress induced by the plane frictionless cylindrical contact. Int. J. Solids Structs, 2001, 38(26–27), 4507–4523.
3.
HouJ. P.HillsD. A.Contact between a pin and a plate with a hole under interference-fit and clearance-fit conditions. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 2001, 215(C6), 629–639.
4.
PerssonA.On the stress distribution of cylindrical elastic bodies in contact. PhD thesis, Division of Strength of Materials, Chalmers University of Technology, Göteborg, 1964.
5.
JohnsonK. L.Contact Mechanics, 1985 (Cambridge University Press).
6.
HouJ. P.HillsD. A.Interference contact between a pin and plate with a hole. J. Strain Analysis, 2001, 36(5), 499–506.
7.
HillsD. A.KellyP. A.DaiD. N.KorsunskyA. M.Solution of Crack Problems—The Distribution Dislocation Technique, 1996 (Kluwer Academic Publishers).
