The paper reviews the theoretical and empirical basis for predicting central burst defects in wire drawing under varying die semi-angle conditions. These are used to develop a numerical modelling approach, which results in an accumulated damage criterion to predict material instability. The predictions from the resulting theoretical model are consistent with previous experimental and theoretical studies in the literature.
PhelanP.BrandonJ.HilleryM.Numerical modelling of defect formation on copper wire surfaces during the wire drawing process. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 2001215(C2), 237–246.
2.
PhelanP.BrandonJ.HilleryM.Finite element modelling of drawing force at different reduction ratios and die angles during the wire drawing process. In Irish Manufacturing Conference, Belfast, 1998, pp. 143–150.
3.
PhelanP.BrandonJ.HilleryM.Influence of die semi-angle and reduction ratio on die contact pressure distribution in single pass wire drawing. In Proceedings of the 15th International Conference on Product Research, Republic of Ireland, 1999, pp. 37–40.
4.
ClaytonP. A.Copper Wire Production, 1990 (International Wire and Machinery Association, Coventry).
5.
AvitzurB.Analysis of central bursting defects in extrusion and wire drawing. Trans. ASME, J. Engng for Industry, 1968, 90(1), 79–91.
6.
ZimmermanZ.AvitzurB.Analysis of the effect of strain hardening on central bursting defects in drawing and extrusion. Trans. ASME, J. Engng for Industry, 1970, 91(1), 135–145.
7.
ChenC.KobayashiS.Deformation analysis of multipass bar drawing and extrusion. Ann. CIRP, 1978, 27(1), 151–155.
8.
PughH.The Mechanical Behaviour of Metals under Pressure, 1971 (Applied Science, London).
9.
MirzaM. S.BartonD. C.The effect of stress triaxiality and strain-rate on the fracture characteristics of ductile metals. J. Mater. Sci., 1996, 31, 453–461.
10.
HancockJ. W.MackenzieA. C.On the mechanism of ductile failure in high strength steels subject to multi-axial stress-states. J. Mechanics and Physics of Solids, 1976, 24, 147–169.
11.
ThomsonE.ShabaikA.NegroniF.A new test method for the study of ductile fractures at large strains. In Proceedings of the 8th NAMRC SME, 1980, pp. 102–109.
