Mathematical model of curvature analysis for conjugate surfaces with generalized motion in three dimensions

Abstract

A general mathematical model is proposed to determine the direct relations between the principal curvatures and directions of two conjugate surfaces in continuous tangency along a line at every instant. Without any assumption regarding the motion of mating surfaces, this model, created on the basis of kinematics, the theory of gearing and differential geometry, is especially suitable for calculating the curvatures of a surface generated on a computer numerically controlled (CNC) machine with surface modifications by non-constant-speed supplemental correcting motions. The model has simplified dramatically the calculation of curvatures by comparison with the differential geometry approach. The principal curvatures of a generated surface and dimensions of contact ellipses can be obtained by the model without the need for complicated equations of the generated surface. For verification of the model, a helical gear set comprising a gear with involuted teeth and a pinion with modified circular arc teeth is investigated. The tooth contact analysis (TCA) technique is also applied to study the shift of bearing contacts and dimensions of contact ellipses under three different kinds of generation setting.

Keywords

curvature analysis conjugate surfaces kinematics approach helical gears tooth contact analysis

Get full access to this article

View all access options for this article.

References

Chen

C. K.

Tang

Y. Y.

H. Y.

Application of Differential Geometry to Mechanical Engineering (in Chinese), 1998 (Harbin Institute of Technology, Harbin).

Gray

Modern Differential Geometry of Curves and Surfaces, 1993 (CRC Press, Boca Raton, Florida).

Weatherburn

C. E.

Differential Geometry of Three Dimensions, 1955 (Cambridge University Press, London).

Litvin

F. L.

The curvature relations in toothed surfaces of a space meshing (in German). Z. Angew. Mathematik und Mechanik, 1969, 49, 685–690.

Chakraborty

Dhande

S. G.

Kinematics and Geometry of Planar and Spatial Cam Mechanisms, 1977 (Halsted Press, New York).

Livtin

F. L.

Theory of gearing. NASA RP-1212 (AVSCOM TR-88-C-035), 1989.

Livtin

F. L.

Gear Geometry and Applied Theory, 1994 (Prentice-Hall, Englewood Cliffs, New Jersey).

Litvin

F. L.

Chen

J. S.

Chen

N. X.

Computerized determination of curvature relations and contact ellipse for conjugate surfaces. Comput. Meth. Appl. Mech. Engng, 1995, 125, 151–170.

Yan

H. S.

Cheng

W. T.

Curvature analysis of spatial cam-follower mechanisms. Mechanism and Mach. Theory, 1999, 34, 319–339.

10.

Dooner

D. B.

Seireg

A. A.

The Kinematic Geometry of Gearing: A Concurrent Engineering Approach, 1995 (Wiley-Interscience, New York).

11.

Hibbeler

R. C.

Engineering Mechanics—Dynamics, 1986 (Macmillan, New York).

12.

Tsay

C. B.

Fong

Z. H.

Tooth contact analysis for helical gears with pinion circular arc teeth and gear involute shaped teeth. ASME Trans., J. Mechanisms, Transm., and Automn in Des., 1989, 111, 278–284.

13.

Litvin

F. L.

Zhang

Topology of modified helical gears and tooth contact analysis (TCA) program. NASA Contractor Report 4224 (AVSCOM 89-C-002), 1989.