An approach of calculation on sliding friction power losses in involute helical gears with modification

Abstract

Sliding friction between the teeth is recognized as one of the main reasons of power losses in transmission as well as a potential reason of vibration and noise. A new approach is proposed to accurately calculate the sliding friction power losses in involute helical gears considered modification and geometric deviations resulting from the manufacturing processes, assembly errors, and deflections of support structures based on the simulation of gear mesh under light and significant load. Firstly, the paths of contact points on the pinion tooth surface are obtained from tooth contact analysis. Tooth surface load distributions and loaded transmission errors in one mesh period are obtained from loaded tooth contact analysis. Secondly, tooth surface load distributions are converted into the normal forces of tooth surface points of contact, loaded transmission errors are brought to the calculation formulas of sliding velocity, and the sliding friction coefficients of tooth surface points of contact are calculated by a non-Newtonian thermal elastohydrodynamic lubrication model. Substituting the sliding velocities, the normal forces, and the sliding friction coefficients into the power calculation formulas gives the sliding friction power losses of tooth surface points of contact. By the soft MATLAB, the values of the sliding friction power losses are integrated and the sliding friction power loss in helical gears from engagement to disengagement is obtained. Finally, an example of this approach is shown in the end. The results indicate that it is very necessary to consider the influence of loaded transmission errors for calculation of sliding friction power losses.