This paper describes the principal features of a microgyroscope bulk machined from a [100] silicon wafer by chemical etching. The equations of motion of the gyroscope are derived and the factors that determine both the mechanical and electrical characteristics of the device are identified. The response to constant and harmonic rates of turn is evaluated for both tuned and untuned gyros. Gyro performance is shown to depend upon the relationship between the mistuning of the primary and secondary modes and the secondary mode damping factor.
YazdiN.AyaziF.NajafiK.Micromachined inertial sensors. Proc. IEEE, August 1998, 86(8), 1640–1659.
2.
Market analysis for microsystems 1996–2002. NEXUS Task Force, ED DGIII/F/3, October 1998.
3.
PetersonK. E.Silicon as a mechanical material. Proc. IEEE, 1982, 70, 420–457.
4.
LoperE. J.LynchD. D.The HRG: A new low-noise inertial rotation sensor. In Proceedings of 16th JT Services Data Exchange for Inertial Systems, Los Angeles, California, November 1982, pp. 16–18.
5.
SoderkvistJ.Design of a solid-state gyroscope sensor made of quartz. Sensors and Actuators, 1990, A21–A23, 293–296.
6.
BurdessJ. S.The dynamics of a thin piezoelectric cylinder gyroscope. Proc. Instn Mech. Engrs. Part C, Journal of Mechanical Engineering Science, 1986, 200 (C4), 271–280.
7.
TangT. K.GutierrezR. C.WilcoxJ. Z.StellC.VorperianV.CalvertR.LiW. J.ChakrabortyI.BartmanR.KaiserW. J.Silicon bulk micromachined vibratory gyroscope. In Tech. Dig. Solid State Sensor and Actuator Workshop, Hilton Heads Island, South Carolina, June 1996, pp. 288–293.
8.
JuneauT.PisanoA. P.SmithJ. H.Dual axis operation of a micromachined rate gyroscope. In Tech. Dig. 9th International Conference on Solid State Sensors and Actuators (Transducers 97), Chicago, Illinois, June 1997, pp. 887–890.
9.
GeigerW.FolkmerB.MenJ.SandmaierH.LangW.A new silicon rate gyroscope. In Proceedings of IEEE Micro Electro Mechanical Systems Workshop (MEMS 98), Heidelberg, Germany, February 1998, pp. 615–620.
10.
PuttyM. W.NajafiK.A micromachined vibrating ring gyroscope. In Dig. Solid State Sensors and Actuators Workshop, Hilton Heads Island, South Carolina, 1994, pp. 213–214.
11.
HopkinsL.Performance and design of a silicon micromachined gyro. In Proceedings of Symposium on Gyro Technology, Stuttgart, Germany, 1997, pp. 1. 0–1.10.
12.
HarrisA. J.BurdessJ. S.WoodD.LangfordR.WilliamsG.WardM. C. L.McNieM. E.Issues associated with the design, fabrication and testing of a crystalline silicon ring gyroscope with electromagnetic actuation and sensing. J. Micromech. Microengng, 1998 (8), 284–292.
13.
MardenM.Fundamentals of Microfabrication, 1997, pp. 226–230 (CRC Press).
14.
GatesW. D.Vibrating angular rate sensor. Electronics, June 1968.
15.
ArnoldR. N.MaunderL.Gyrodynamics and Its Engineering Applications, 1961 (Academic Press).
16.
DingX.KoW.MansourJ.Residual stress and mechanical properties of boron doped p+ silicon films. Sensors and Actuators, 1990, A21-A23, 866–871.
