In this paper, a numerical model for the calculation of the drawbead restraining force is described. The model is formulated using an elastoplastic finite deformation, finite element method. Because of the bending, unbending and reverse bending deformation which occurs as the sheet metal passes through the drawbead, a kinematic hardening constitutive law associated with a description of the cyclic property and the Bauschinger effect is considered. In comparison with experiments, the results based on the kinematic hardening material model proved to be better than those based on the usual isotropic hardening material model.
PainterM. J.PearceR.Metal flows through a draw-bead. Sheet Metal Industries, July 1976, 12–19.
2.
NineH. D. In Mechanics of Sheet Metal Forming (Eds KoistinenD. P.WangN. M.), 1978, pp. 179–211 (Plenum, New York).
3.
NineH. D.The applicability of Coulomb's friction law to drawbeads in sheet metal forming. J. Appl. Metal Working, 1982, 2(3), 200–210.
4.
WangN. MShahV. C.Drawbead design and performance. J. Mater. Shaping Technol., 1991, 9(1), 21–26.
5.
DemeriM. Y.Drawbeads in sheet metal forming. J. Mater. Engng Performance, 1993, 2(6), 863–866.
6.
WangN. M.A mathematical model of drawbead forces in sheet metal forming. J. Appl. Metal Working, 1982, 2(3), 193–199.
7.
SanchezL. R.WeinmannK. J.An analytical and experimental study of the flow of sheet metal between circular drawbeads. Trans. ASME, J. Engng for Industry, 1996, 118(2), 45–54.
8.
WeidemannC.The blankholder action of drawbeads. In Proceedings of the Tenth Biennial IDDRG Congress, 1978, pp. 79–85.
9.
StoughtonT. B.Model of drawbead forces in sheet metal forming. In Proceedings of the 15th Biennial IDDRG Congress, 1988, pp. 205–215.
10.
TriantafyllidisN.MakerB.SamantaS. K.An analysis of drawbeads in sheet metal forming. Part I: Problem formulation. J. Engng Mater. Technol., 1986, 108(10), 321–327.
11.
ChabrandP.DuboisF.GelinJ. C.Modelling draw-beads in sheet metal forming. Int. J. Mech. Sci., 1996, 38(1), 59–77.
12.
ChenF. K.LiuJ. H.Analysis of an equivalent draw-bead model for the finite element simulation of a stamping process. 1997, 37(4), 409–424.
13.
HillR. H.Some basic principles in mechanics of solids without a natural times. J. Mech. Phys. Solids, 1959, 7, 209–230.
14.
McMeekingR. M.RiceT. R.Finite element formulations for problems of large elastic plastic deformation. Int. J. Solids Struct., 1975, 11, 601–616.
15.
KriegR. D.KeyS. W.Implementation of a time dependent plasticity theory into structure computer programes. In Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, Vol. 20, 1976, pp. 125–137 (American Society of Mechanical Engineers, New York).
16.
HallquistJ. O.GoudreauG. L.BensonD. J.Sliding interfaces with contact impact in large scale Lagrangian computations. Comput. Meth. Appl. Mech. Engng, 1985, 51, 107–137.
