This paper presents a three-dimensional model to describe the transient heat and fluid flow in gas tungsten arc welding (GTAW) with a filler metal. Using the volume of fluid (VOF) method, the melt depth and the surface profile of the weld are predicted. The GTAW experiments show that the predictions of the weld pool shape based on the model are in good agreement with the measured values.
American Welding Society.Welding handbook, 9th Edition, 2000.
2.
GoldakJ.BibbyM.MooreJ.PatelB.Computer modeling of heat flow in welds. Metall. Trans. B, 1986, 17B, 587–600.
3.
ZachariaT.DavidS. A.VitekJ. M.DebRoyT.Weld pool development during GTA and laser beam welding of type 304 stainless steel, Part I - theoretical analysis. Welding J., 1989, 68(12), 499s–509s.
LeeS. Y.NaS. J.Numerical analysis of molten pool convection considering geometric parameters of cathode and anode. Welding J., 1997, 76(11), 484s–497s.
6.
KimW. H.FanH. G.NaS. J.Effect of various driving forces on heat and mass transfer in arc welding. Numer. Heat Transfer Part A, 1997, 32(6), 633–652.
7.
ZachariaT.DavidS. A.VitekJ. M.KrausH. G.Computational modeling of stationary gas-tungstenarc weld pools and comparison to stainless steel 304 experimental results. Metall. Mater. Trans. B, 1991, 22B, 243–257.
8.
ChooR. T. C.SzekelyJ.The possible role of turbulence in GTA weld pool behavior. Welding J., 1994, 73(2), 25s.
9.
WangY.TsaiH. L.Modeling of the effects of surface-active elements on flow patterns and weld penetration. Metall. Mater. Trans. B, 2001, 32B, 145–161.
10.
FanH. G.TsaiH. L.Heat transfer and fluid flow in a partially or fully penetrated gas tungsten arc welding. Int. J. Heat Mass Transfer, 2001, 44(2), 417–428.
11.
KouS.WangY. H.Computer simulation of convection moving arc weld pools. Metall. Trans., 1986, 17A, 2271.
12.
ZachariaT.EraslanA. H.AidunK.Modeling of autogenous welding. Welding J., 1988, 67, 53s–62s.
13.
DuttaP.JoshiY.JanaswamyR.Thermal modeling of gas tungsten arc welding process with nonaxisymmetric boundary conditions. Numer. Heat Transfer Part A, 1995, 27, 499–518.
14.
ReddyA. C.GuhaB.AcharD. R. G.Finite element modeling of three-dimensional transient heat transfer in stainless steel (304) pulsed GTA weldments. Numer. Heat Transfer Part A, 2002, 41, 41–64.
15.
CaoZ. N.ZhangY. M.KovacevicR.Numerical dynamic analysis of moving GTA weld pool. J. Mfg Sci. Engng, 1998, 120, 173–177.
16.
KimJ. W.NaS. J.A study on the three-dimensional analysis of heat and fluid flow in GMAW using boundary-fitted coordinates. Trans. ASME, 1994, 116(2), 78–85.
17.
UshioM.WuC. S.Mathematical modeling of three-dimensional heat and fluid flow in a moving gas metal arc weld pool. Metall. Trans., 1997, 28B, 509–517.
18.
WuC. S.YanF. J.Numerical simulation of transient development and diminution of weld pool in gas tungsten arc welding. Modelling Simulation Mater. Sci. Engng, 2004, 12, 13–20.
19.
WangY.TsaiH. L.Modeling heat and mass transfer and fluid flow in three-dimensional gas metal arc welding. In Proceedings of IMECE'02: 2002 ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, USA, 17–22 November 2002, pp. 1–16.
20.
ChooR. T. C.SzekelyJ.WesthoffR. C.Modeling of high-current arcs with emphasis on free surface phenomena in the weld pool. Welding J., 1990, 69, 346s–361s.
21.
NicholsB. D.HirtC. W.HotchkissR. S.SOLAVOF: A solution algorithm for transient fluid flow with multiple free boundaries. Report LA-8355, Los Alamos Scientific Laboratory, 1980.
22.
PatankarS. V.Numerical Heat Transfer and Fluid Flow, 1980 (Hemisphere, Washington DC).
23.
LinM. L.EagarT. W.Pressures produced by gas tungsten arcs. Metall. Trans. B, 1986, 17B, 601–607.
24.
DuttaP.JoshiY.FrancheC.Determination of gas tungsten arc welding efficiencies. Expl Thermal Fluid Sci., 1994, 9, 80–89.
