This research presents the effect of welding speed on dissimilar joints of AA7075-T6 and AA6061-T6 alloys. The weld quality was evaluated through observations of the macrostructure. The mechanical properties of the welds, including the ultimate strength, the percentage of elongation, and the microhardness variations, were determined for different welding speeds. Also the effect of the positions of the two alloys on the mechanical properties was investigated. In addition, during the friction stir welding (FSW) process, the peak temperatures were measured in order to indicate the relation between the peak temperature and the hardness distribution at the heat-affected zone (HAZ). Accordingly, the influence of the welding speed on the developed grain size was elucidated by the microstructural analysis.
MadhusudhanaR. GSammaiahPMohandasTInfluence of welding techniques on microstructure and mechanical properties of AA6061 (Al-Mg-Si) gas tungsten arc welds2002 In Proceedings of National Conference on Processing of metals, Miami, FL
RhodesC. GMahoneyM. WBingelW. HEffects of friction stir welding on microstructure of 7075 aluminumScripta Mater.19973669–75
4.
ThomasW. MFriction stir butt welding1991 USA US Patent no. 5460, 317
5.
LiuH. JFujiiHMaedaMNogiKTensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloyJ. Mater. Processing Technol.2003142692–696
6.
RhodesC. GMahoneyM. WBingelW. HSpurlingR. ABamptonC. CEffects of friction stir welding on microstructure of 7075 aluminumScripta Mater.198736(1)69–75
7.
HattinghaD. JBlignaultCNiekerkT. IJamesaM. NCharacterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented toolJ. Mater. Processing Technol.200820346–57
8.
BarcellonaABuffaGFratiniLProcess parameters analysis in friction stir welding of AA6082-T6 sheets2004 Keynote paper of the VII ESAFORM Conference, Trondheim, Norway 371–374
9.
DickersonT. LPrzydatekJFatigue of friction stir welds in aluminum alloys that contain root flawsInt. J. Fatigue2003251399–1409
10.
ChenYLiuHFengJFriction stir welding characteristics of different heat-treated-state 2219 aluminum alloy platesMater. Sci. Engng A200642021–25
11.
CavalierePNobileRPanellaF. WSquillaceAMechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir weldingInt. J. Mach. Tools Mf.200646588–594
12.
ElangovanKBalasubramanianVInfluences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminum alloyMater. Sci. Engng A20074597–18
13.
RenS. RMaZ. YChenL. QEffect of welding parameters on tensile properties and fracture behavior of friction stir welded Al–Mg–Si alloyScripta Mater.20075669–72
14.
GallaisCDenquinABréchetYLapassetGPrecipitation microstructures in an AA6056 aluminum alloy after friction stir welding: Characterization and modelingMater. Sci. Engng A200849677–89
15.
BahemmatPBesharatiM. KHaghpanahiaMRahbariASalekrostamRMechanical, micro- and macrostructural analysis of AA7075 – T fabricated by friction stir butt welding with different rotational speeds and tool pin profilesProc. IMechE, Part B: J. Engineering Manufacture2010224(B3)419–433 DOI: 10.1243/09544054JEM1554
16.
ReshadKBesharatiM. KNasiriA. MBahemmatPInvestigations on the effects of the tool material, geometry and tilt angle on friction stir welding of pure titaniumJ. Mater. Engng Performance201019(7)955–962 DOI: 10.1007/s11665-009-9582-8
17.
CavalierePPanellaFEffect of tool position on the fatigue properties of dissimilar 2024–7075 sheets joined by friction stir weldingJ. Mater. Processing Technol.2008206249–255
18.
CavalierePDeSantis APanellaFSquillaceAEffect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir weldingMater. Des.200830609–616
19.
Amancio-FilhoS. TSheikhiSSantosJ. FBolfariniCPreliminary study on the microstructure and mechanical properties of dissimilar friction stir welds in aircraft aluminum alloys 2024-T351 and 6056-T4J. Mater. Processing Technol.2008206132–142
20.
SatoY. STakauchiHParkS. H. CKokawaHCharacteristics of the kissing-bond in friction stir welded Al alloy 1050Mater. Sci. Engng A2005405333–338
21.
OosterkampAOosterkampL. DNordeideAKissing bond phenomena in solid state welds of aluminum alloysWeld. J.200483225–231
22.
23.
SvenssonL. EKarlssonLLarssonHKarlssonBFazziniMKarlssonJMicrostructure and mechanical properties of friction stir welded aluminium alloys with special reference to AA 5083 and AA 6082Sci. Technol. Weld. Joining20005285–296
24.
MoreiraPSantosTTavaresSRichterVVilaçaPDe CastroPMechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6Mater. Des.200930180–187
25.
MurrL. ELiuGMcClureJ. CDynamic recrystallization in friction-stir welding of aluminum alloy 1100J. Mater. Sci. Lett.199716(22)1801–1803
AydinHBayramAUguzAAkayK. STensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-stateMater. Des.200930(6)2211–2221
28.
29.
HassanKPrangnellPNormanAPriceDWilliamsS. WEffect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir weldsSci. Technol. Weld. J.20038257–268
