To predict a fracture in the concentrated stress and strain area of a door hinge, the criterion for a ductile fracture, as developed by Oyane (Journal of Mechanical Work. Technology,
GuoY. Q.LiY. M.BogardF.DebreyK., An efficient pseudo-inverse approach for damage modelling in the sheet metal forming process. J. Mater. Processing Technol., 2004, 151, 88–97.
2.
WangC. T.KinzelG.AltanT., Failure and wrinkling criteria and mathematical modeling of shrink and stretch flanging operation in sheet-metal forming. J. Mater. Processing Technol., 1995, 53, 759–780.
3.
TakudaT.MoriK.FujimotoH.HattaN., Prediction of forming limit in bore-expanding of sheet metals using ductile fracture criterion. J. Mater. Process. Technol., 1999, 92-93, 433–438.
4.
CliftS. E.HartleyP.SturgessC. E. N.RoweG. W., Fracture prediction in plastic deformation process. Int. J. Mech. Sci., 1990, 32, 1–17.
5.
KimY. S.ParkK. C., Sensitivity analysis of material and process variables affecting on the stamping formability. J. Korean Soc. Mech. Engrs. A, 1996, 20, 2246–2256.
6.
ElsayedE. A.HsiangT., Quality engineering in production systems, 1989 (McGraw-Hill, New York).
7.
BendellA.DisneyJ.PridmoreW. A., Taguchi methods: Application in world application, Industries, productivity, improvement and case study, 1989 (IFS Publication, UK).
8.
TaguchiG., On-line quality control during production, 1981 (Japan Standard Association, Tokyo).
9.
NguyenD. T.ChoiS. G.ParkJ. Y.SuhY. S.KimY. S., Finite element method simulations to improve press formability of door hinge. J. Mater. Engng Performance, 2009, 18(8),: 1005–1011.
10.
WangG. G.ShanS., Review of metamodeling techniques in support of engineering design optimization. J. Mech. Des., 2007, 129(4), 370–380.
11.
DelameziereA.NaceurH.BreitkopfP.Knopf-LenoirC.BatozJ. L.VillonP., Feasibility in deep drawing: Optimization of material properties using response surface. Mech. Ind., 2002, 3(2), 93–98.
12.
WangH.LiG. Y.ZhongZ. H., Optimization of sheet metal forming processes by adaptive response surface based on intelligent sampling method. J Mater. Process Technol., 2008, 197(1-3), 77–88.
13.
ZhangX.ChengG.WangB.ZhangH., Optimum design for energy absorption of bitubal hexagonal columns with honeycomb core. Int. J. Crashworthiness, 2008, 13(1), 99–107.
14.
UntaroiuC. D.ShinJ.CrandallJ. R., A design optimization approach of vehicle hood for pedestrian protection. Int. J. Crashworthiness, 2007, 12(6), 581–589.
15.
HibbitD.KarlssonB.SorensenP., ABAQUS user's manual, version 6.5.1, 2003 (AMS, Providence, USA).
16.
OyaneM.SatoT.OkimotoK.ShimaS., Criteria for ductile fracture and their applications. J. Mech. Work. Technol, 1980, 4, 65–81.
17.
SwiftH. W., Plastic instability under plane stress. J. Mech. Phys. Solids., 1952, 1, 1–18.
18.
TodaM.MikiT.YanagimotoS.OsakadaK., Study of computer aided system for analyzing mechanical behavior of steel bar and wire under cold forging. J. Jap. Soc. Tech. Plasticity, 1988, 29, 971–976.
19.
TakudaH.MoriK.FujimotoH.HattaN., Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion. J. Mater. Process. Technol., 1996, 60, 291–296.
20.
KoY. K.LeeJ. S.HuhH.KimH. K.ParkS. H., Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion. J. Mater. Process. Technol., 2007, 187-188, 358–362.
21.
KimY. S.NamJ. B.ChuM. S.KwonY. D., The use of the finite-element method to design an optimized tool for the plain-strain punch stretching test. Metal. Mater. Trans. A, 2000, 31A, 93–98.
