In the present investigation, the critical major strain in anisotropic sheet metal forming is calculated under three axial stress states. Plastic analysis is based on the modified Hosford yield criterion, the Levy—Mises stress—strain increment relationship, and the power law material constitutive equation. Results show that the critical major strain is usually insensitive to the Hosford exponent.
GotohM.ChungT.IwataN., ‘Effect of out-of-plane stress on the forming limit strain of sheet metals’JSME Ser. A38 (1995): 123–132.
2.
SmithL. M.AverillR. C.LucasJ. P.StoughtonT. B.MatinP. H., ‘Influence of transverse normal stress on sheet metal formability’Int. J. Plasticity19 (2003): 1567–1583.
3.
ChakrabartyJ., Theory of plasticity (New York: McGraw Hill1987).
4.
MendelsonA., Plasticity theory and applications (Malabar, Florida: Krieger Publishing Company1983).
5.
MarinJ., Mechanical behaviour of engineering materials (Englewood Cliffs, New Jersey: Prentice Hall1962).
6.
HosfordW. F., On yield loci of anisotropic cubic metals. Proceedings of 7th North American Metal-Working Research Conference, SME, Dearborn, MI. 1979, pp. 191–197 (Society of Manufacturing Engineers, Dearborn, Michigan).
7.
HosfordW. F., ‘Comments on anisotropic yield criteria’Int. J. Mech. Sci.27 (1985): 423–427.
8.
FriedmanP. A.PanJ., ‘Effects of plastic anisotropy and yield criteria on prediction of forming limit curves’Int. J. Mech. Sci.42 (2000): 29–48.
9.
BauccioM., ASM metals reference book (Materials Park, OH: ASM International1993).
10.
SwiftH. W., ‘Plastic instability under plane stress’J. Mech. Phys. Solids1 (1952): 1–18.
11.
HillR., ‘On discontinuous plastic states with special reference to localized necking in thin sheets’J. Mech. Phys. Solids1 (1952): 19–30.
