Prediction of maximum forming load and billet dimensions using an abductive network and finite element method simulation of a near net-shaped helical gear forging
Free accessResearch articleFirst published online March, 2009
Prediction of maximum forming load and billet dimensions using an abductive network and finite element method simulation of a near net-shaped helical gear forging
This study applies the finite element method (FEM) in conjunction with an abductive network to predict maximum forging load and billet dimensions during near net-shaped helical gear forging. Maximum forging load and the billet dimensions are determined for different process parameters, such as modules, number of teeth, and helical angle of the near net-shaped gear forging, using the FEM. The abductive network is then utilized to synthesize the datasets acquired from numerical simulations. Finally, prediction models are established for predicting maximum forging load and the billet dimensions under an appropriate range of process parameters.
SadeghiM. H.DeanT. A., ‘The ejection of precision-forged straight and helical spur-gear forms’J. Mater. Process. Technol.31 (1992): 147–160.
2.
SadeghiM. H.DeanT. A., ‘Precision forging straight and helical spur gears’J. Mater. Process. Technol.45 (1994): 25–30.
3.
ChoiJ. C.ChoiY.TakS. J., ‘The forging of helical gears (II): Comparisons of the forging processes’Int. J. Mech. Sci.41 (1999): 725–739.
4.
DeanT. A., ‘The net-shape forming of gears’Mater. Des.21 (2000): 271–278.
5.
SzentmihalyiV.LangeK.TronelY.ChenotJ. L.DuclouxR., ‘3-D finite-element simulation of the cold forging of helical gears’J. Mater. Process. Technol.43 (1994): 279–291.
6.
LangeK.SzentmihalyiV., ‘Optimized cold forging of helical gears by FEM-simulation’ In Proceedings of the Ninth International Congress on Cold forging, Solihull, UK, 22–26 May 1995, pp. 283–289.
7.
ShimS. W.SongK. S.YoonD. S.ParkY. B.YangD. Y., ‘Precision cold forging for reverse idle gear of automobile’ In Proceedings of the Second Symposium on Forging, Pusan, Korea, 2–6 September 1995, pp. 145–157.
8.
ParkY. B.YangD. Y., ‘Finite element analysis for precision cold forging of helical gear using recurrent boundary conditions’Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture212 (1998): 231–240.
9.
CaiJ.DeanT. A.HubZ. M., ‘Alternative die designs in net-shape forging of gears’J. Mater. Process. Technol.150 (2004): 48–55.
10.
KimS. Y.KubotaS.YamanakaM., ‘Application of CAE in cold forging and heat treatment processes for manufacturing of precision helical gear part’J. Mater. Process. Technol.201 (2008): 25–31.
11.
JungS. Y.KangM. C.KimC.KimC. H.ChangY. J.HanS. M., ‘A study on the extrusion by a two-step process for manufacturing helical gear’Int. J. Adv. Manuf. Technol., in press.
12.
KimD. J.KimB. M., ‘Application of neural network and FEM for metal forming processes’Int. J. Mach. Tools Manuf.40 (2000): 911–925.
13.
BrooksJ. W.SabinT. J., ‘A comparison of the macromodel and neural network approaches for the prediction of microstructural evolution during hot forging’Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture215 (2001): 915–925.
14.
LinF. C.KwanC. T., ‘Application of abductive network and FEM to predict an acceptable product on T-shape tube hydroforming process’Comput. Struct.82 (2004): 1189–1200.
15.
LinC. T.KwanC. T., ‘Application of abductive network and FEM to predict the optimal blank contour of an elliptic cylindrical cup from deep drawing’J. Mater. Process. Technol., in press.
16.
YangT. S.HsuY. C., ‘Application of abductive network and FEM to predict the maximum forging force and the final face width of spur gear’J. Mater. Sci. Forum532–533 (2006): 861–864.
IvakhnenkoA. G., ‘Polynomial theory of complex system’IEEE Trans. Syst.1 (1971): 364–378.
19.
PatrikarA.ProvenceJ., ‘Nonlinear system identification and adaptive control using polynomial networks’Math. Comput. Model.23 (1996): 159–173.
20.
BarronA. R., ‘Predicted square error: A criterion for automatic model selection’Self-organizing methods in modeling: GMDH type algorithms (Ed. FarlowS. J.), 1984 (New York: Marcel Dekker).
