This paper is concerned with the optimization of the drive for a linear guide press, which is one of the mechanical presses. The design of a linear guide drive for a mechanical press is introduced, and the eccentric mechanism is optimized in order to improve the load and velocity characteristics. The optimized drive is compared with the existing one in terms of load, velocity, torque, etc. As a result of optimization, the load capacity during the stroke is increased and the slide velocity in the working region is reduced. The new design provides many applications for precision forming such as extrusion and the sheet metal forming processes.
LeeW. P.Press Engineering, 1996, pp. 451–452 (Korea Industrial Information Centre, Korea).
2.
YossifonS.ShivpuriR.Optimization of a double knuckle linkage drive with constant mechanical advantage for mechanical presses. Int. J. Mach. Tools Mf., 1993, 33, 193–208.
3.
YossifonS.ShivpuriR.Design consideration for the electric servo-motor driven 30 ton double knuckle press for precision forming. Int. J. Mach. Tools Mf., 1993, 33, 209–222.
4.
YossifonS.ShivpuriR.AltanT.The AC servo-motor drive double toggle press: Mechanism analysis and optimization. Report ERC/NSM-B-S-90-33, Engineering Research Center for Net Shape Manufacturing, The Ohio State University, Columbus, Ohio, 1990.
5.
Niagara Machine and Tool Work, Link Driven Press Catalog. Bulletin 51, Buffalo, New York, 1988.
HwangB. B.OhH. S.LeeH. Y.A driving mechanism of the press for deep drawing and forging In Advanced Manufacturing Processes, Systems, and Technologies (AMPST 96), The University of Bradford, 1996, pp. 685–694.
8.
DoegeE.MeinenJ.NeumaierT.SchaprianM.Numerical design of a new forging press drive incorporating non-circular gears. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B4), 465–471.
9.
KooH. W.HwangB. B.LimJ. Y.LeeH. Y.Kinematic analysis of several linkage drives for mechanical presses. J. Korean Soc.for Technol. of Plasticity, 1997, 6(6), 471–481.
10.
BlissE. W. Company, Press Division, Bliss General Catalog, 1971, p. 31 (Power Bar Press, Grand Rapid, Michigan).
11.
NaG. A.Press Handbook, 1989, pp. 159–176 (Electromechanics Company, Korea).
12.
HamiltonE.Power presses, their design and characteristics. Sheet Metal Industries, 1960, 37, 501–513.
13.
AroraJ. S.Introduction to Optimum Design, 1989, pp. 403–410 (McGraw-Hill, Singapore).
14.
AroraJ. S.Introduction to Optimum Design, 1989, p. 285 (McGraw-Hill, Singapore).
