An integrated modelling environment for the computer-based embodiment of engineering systems with standard components

Abstract

In today's competitive global manufacturing industries, standard components play an important role in the commercial success of any product or machine system. The consideration of standard components during the early stages of the new product introduction process is therefore particularly important. However, the ability of the designer to explore different configurations and combinations of standard components is severely frustrated by the analytically intensive and time-consuming aspects of not only embodying a concept but also dealing with standard components and their associated mechanisms for design and selection. This paper presents the application of an integrated modelling environment for the computer-based embodiment of a machine system. The role of such an approach in the design process is discussed and the elements of the modelling environment are summarized. The processes of constructing and embodying a machine system are described and an industrial case study is presented. This case study is used to demonstrate the capabilities and potential of the new approach for supporting the embodiment and evaluation of alternative system configurations.

Keywords

systems modelling machine systems embodiment standard components

References

Pahl

Beitz

Engineering Design: A Systematic Approach (Transl. Wallace

), 2nd edition, 1996 (Springer-Verlag, London).

Ulrich

K. T.

Eppinger

S. D.

Product Design and Development, 2nd edition, 2000 (Irwin McGraw-Hill, New York).

Harmer

Q. J.

Weaver

P. M.

Wallace

K. M.

Design-led component selection. Computer-Aided Des., 1998, 30(5), 391–405.

Clews

Leonard

Technology and Production, 1985 (Philip Allan Publishers Limited, Oxford).

Ullman

D. G.

The Mechanical Design Process, 1992 (McGraw-Hill, New York).

Wallace

A. P.

The modelling of engineering assemblies based on standard catalogue components. MPhil thesis, University of Bath, 1995.

Culley

S. J.

Webber

S. J.

Implementation requirements for electronic standard component catalogues. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 1992, 206(B4), 253–260.

Counsell

Porter

Dawson

Duffy

Schemebuilder: Computer aided knowledge based design of mechatronic systems. Assembly Automn, 1999, 19(2), 129–138.

Keown

Pspice and Circuit Analysis, 1994 (Macmillan, London).

10.

AMEsim, 2000.

11.

Ward

A. C.

Seering

W. P.

The performance of a mechanical design compiler. Trans. ASME, Des. Engng, 1989, 17, 89–97.

12.

Hicks

B. J.

Culley

S. J.

A flexible representation of engineering assemblies for an integrated modelling environment. In Proceedings of the International Conference on Engineering Design (ICED99), Munich, August 1999, pp. 1113–1116.

13.

Hicks

B. J.

Culley

S. J.

A protocol for communication in a component based modelling infrastructure. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B4), 453–464.

14.

Hicks

B. J.

Culley

S. J.

Compatibility issues for mechanical system modelling with standard components. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2002, 216(B2), 235–250.

15.

SKF Limited, Electronic Bearing Selection Catalogue, 2000.

16.

Hicks

B. J.

Culley

S. J.

Mullineux

Integrating engineering component representations for the design and synthesis of mechanical systems. In Proceedings of the International Conference on Engineering Design (ICED01), August 2001, pp. 437–444.