The dynamic characteristics of high-speed drilling were investigated in this study. To improve quality and produce a higher production rate, the dynamic characteristics of the drilling process need to be studied. A pre-twisted beam is used to simulate the drill. The moving Winkler-type elastic foundation is used to approximate the drilling process. A time-dependent vibration model for drilling is presented. The spinning speed, pre-twisted angle and thrust force effects of the drill are considered. The numerical analysis indicates that the natural frequency is suddenly reduced as the drill moves into a workpiece.
RosardD. D.Natural frequency of twisted cantilever beams. ASME paper 52-A-15, 1952.
2.
JarrettG. W.WarnerP. C.The vibration of rotating tapered twisted beam. Trans. ASME, J. Appl. Mechanics, 1953, 381–389.
3.
TekinalpO.UlsoyA. G.Modeling and finite element analysis of drill bit vibration. Trans. ASME, J. Vibr., Acoust., Stress, and Reliability in Des., 1989, 111, 148–155.
4.
TekinalpO.UlsoyA. G.Effect of geometric and process parameters in drill transverse vibration. Trans. ASME, J. Engng for Industry, 1990, 112, 189–194.
5.
LiaoC. L.DangY. H.Structural characteristics of spinning pretwisted orthotropic beams. Computer and Structs, 1992, 45(4), 715–731.
6.
LiaoC. L.HuangB. W.Parametric instability of a pretwisted beam under periodic axial force. Int. J. Mech. Sci., 1995, 37(4), 423–439.
7.
MagrabE.GilsinnD. E.Bucking loads and natural frequency of twist drills. Trans. ASME, 1984, 106, 196–204.
8.
UlsoyA. G.A lumped parameter model for the transverse vibration of drill bit. Control of Mfg Processes and Robotic System, 1989, 15–25.
9.
FujiH.MaruiE.EmaS.Whirling vibration in drilling. Part 3: Vibration analysis in drilling workpiece with a pilot hole. Trans. ASME, J. Engng for Industry, 1988, 110, 315–321.
10.
RinconD. M.UlsoyA. G.Complex geometry, rotary inertia and gyroscopic moment effects on drill vibrations. J. Sound Vibr., 1995, 188(5), 701–715.
11.
IwastsuboT.SugiyamaY.IshiharaK.Stability and stationary vibrations of columns under periodic loads. J. Sound Vibr., 1972, 23, 245–257.
12.
LeeH. P.Buckling and dynamic stability of spinning pretwisted beams under compressive axial loads. Int. J. Mech. Sci., 1994, 36(11), 1011–1026.
13.
LeeH. P.Dynamic response of a beam with a moving mass. J. Sound Vibr., 1996, 192(2), 289–294.
14.
RamY. M.CaldwellJ.Free vibration of a string with moving boundary conditions by the method of distorted images. J. Sound Vibr., 1996, 194(1), 35–47.
15.
FungR. F.HuangJ. S.ChuJ. J.Dynamic stability of an axially travelling string/slider coupling system with moving boundary. J. Sound Vibr., 1998, 211(4), 689–701.
16.
LawS. S.ZhuX. Q.Study on different beam models in moving force identification. J. Sound Vibr., 2000, 234(4), 661–679.
17.
WuJ. S.ChenD. W.Dynamic analysis of a uniform cantilever beam carrying a number of elastically mounted point masses with dampers. J. Sound Vibr., 2000, 229(3), 549–578.
18.
LeeH. P.Dynamic stability of a tapered cantilever beam on an elastic foundation subjected to a follower force. Int. J. Solid Structs, 1996, 33(10), 1409–1424.
