In this paper, various contouring test systems for computer numerically controlled (CNC) machine tools are reviewed. It is the first time a laser diode and a quadrant sensor have been employed to build a simple contouring measuring system for testing dynamic performance of a CNC machine tool. The experimental work on a CNC machine tool with a Fanuc OM controller for various contouring paths under specified feed rates is carried out. Then, the compensation work is executed with the assistance of this developed contouring system. After the compensation, the contouring error, especially at a high feed rate and small radius, is reduced significantly.
BryanJ. B.A simple method for testing measuring machines and machine tools. Precision Engng, 1982, 4(2), 61–69.
3.
KnappW.Test of the three-dimensional uncertainty of machine tools and measuring machines and its relation to machine errors. Ann. CIRP, 1983, 32(1), 459–464.
4.
KnappW.Circular test for three coordinate measuring machine tools. Precision Engng, 1983, 5(3), 115–124.
5.
KakinoY.IharaY.NakatsuY.Compensation of 3-dimensional coordinate measuring machine and evaluation of double ball bar test by error vector analysis. J. JSPE, 1985, 51(6), 1224–1250.
6.
KakinoY.IharaY.NakatsuY.The measurement of motion errors of NC machine tools and diagnosis of their origins by using telescoping magnetic ball bar method. Ann. CIRP, 1987, 36(1), 337–380.
7.
KakinoY.IharaY.KameiA.IseT.Study on the motion accuracy of NC machine tools (1st Report)—The measurement and evaluation of motion errors by double ball bar test. J. JSPE, 1986, 7, 1193–1198.
8.
KakinoY.IharaY.NakatsuY.A study on the motion accuracy of NC machine tools (2nd Report)—Diagnosis of motion error origins by using double ball bar test. J. JSPE, 1986, 52(10), 1739–1745.
9.
KnappW.Circular test on NC machine tools in industrial application. J. Ind. Prod. Engng, 1986, 10(3), 99–100.
10.
KnappW.Accuracy of length measurement and positioning: Statistical measurement and contouring. Ann. CIRP, 1988, 37(1), 511–514.
11.
BurdekinM.ParkJ.CONTISURE—a computer aided system for assessing the contouring accuracy of NC machine tools. In 27th International MATADOR Conference, 1988, pp. 197–203.
12.
BurdekinM.JyweW.Optimizing the contouring accuracy of CNC machines using the Contisure system. In 29th International MATADOR Conference, April 1992.
13.
ZiegertJ. C.MizeyC. D.The laser ball bar new instrument for machine tool metrology. Precision Engng, 1994, 1.16(4), 259–267.
14.
US Pat.5428446, 1995.
15.
JyweW.A computer-aided accuracy testing device for CNC machine tools. PhD thesis, University of Manchester Institute of Science and Technology, 1992.
16.
SchmitzT.ZiegertJ.A new sensor for the micrometer-level measurement of three-dimensional dynamic contours. Measmt Sci. Technol., 1999, 10, 51–62.
17.
JyweW.LiuC. H.Application of ball bar system and genetic algorithm for CNC latch accuracy testing. Int. J. Advd Mfg Technol., 2001, 17, 189–195.
18.
JyweW.LiuC. H.Verification and evaluation for volumetric and positional error of CNC machine tools. Int. J. Mach. Tools Mf., 2000, 40, 1899–1911.
19.
JyweW.LiuC. H.A new measuring apparatus for verifying the CNC machine tools performance using PSD. J. Chin. Soc. Mech. Engr, April 2001, 22(1), 21–29.
20.
SchaltshikR.The accuracy of machine tools under load conditions. Ann. CIRP, 1979, 28, 339–342.
21.
JyweW.LiuC. H.ChenC. K.The min-max problem for evaluating the form error of a circle. Measurement, 1999, 6, 273–282.
