The paper describes the requirements of product designers concerning methods for environmental evaluation. It argues that indicators can be used for rough environmental evaluations and presents experience gained with the indicator-based Oil Point Method (OPM). This method is illustrated by means of three examples: A vacuum cleaner, two sweaters and a passenger car. The quality of the results is compared with two other methods for environmental evaluation.
WenzelH.HauschildM.AltingL.Environmental Assessment of Products, Vol. 1, Methodology, Tools and Case Studies in Product Development, 1997 (Chapman and Hall, London).
2.
GoedkoopM.The Eco-indicator 95. Final Report, NOH Report 9523, Amersfoot, The Netherlands, 1995.
3.
RydingS.-O.Environment-oriented Product Development (in Swedish), 1995 (Forlägs AB Industrial Literature, Stockholm, Sweden).
4.
BeyN.The Oil Point Method-a tool for indicative environmental evaluation in material and process selection. PhD thesis, Department of Manufacturing Engineering, Technical University of Denmark, September 2000.
5.
Miljôbelastningen ved familiens akitiviteter (Environmental impact from the activities of a family) (in Danish). National Consumer Agency of Denmark Report 1996. 1, Copenhagen, Denmark, 1996, 79 pp. (can be downloaded from www.fs.dk).
Bedre elvaner (Better electricity habits) (Brochure, in Danish). Association of Danish Electricity Producers (Danske Elværkers Forening), Denmark, 1998.
8.
Tôrretumblere (Tumble dryers) (in Danish). Association of Danish Electricity Producers (Danske Elvækers Forening), Denmark, October 1997.
9.
White goods catalogue. Zanussi A/S, Denmark, 1999.
10.
BousteadI.The Boustead Model 4, Life Cycle Inventory Software, Version 4, 1998 (Boustead Consulting, UK).
11.
The Cambridge Materials Selector (CMS Software v. 2.1.1 (Generic Data Base v. 2.52)), 1994-98 (Granta Design Limited, Trumpington, Cambridge).
12.
Eco-profiles of the European plastics industry. Report 10: Polymer conversion. APME, Brussels, Belgium, 1997.
13.
Eco-inventories for Packaging Materials (in German), 1996, Vols 1 and 2 (BUWAL, Bern, Switzerland).
14.
EDIP PC-tool v. 2.11 Beta, 1998 (Danish Environmental Protection Agency, Copenhagen, Denmark).
15.
Idemat 98 (Software v. 1.0.1.0), 1998 (Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands).
