This paper shows that the mechanical response of superplastic materials is related to their microstructure and that the use of a microstructural gradient approach can improve the evenness in straining during superplastic gas-blow forming. Finite element simulations of the forming process are carried out to investigate the effect of initial grain-size gradients on the non-uniform thinning of a formed structural component.
PillingJ.RidleyN.Superplasticity in Crystalline Solids, 1989 (The Institute of Metals, London).
2.
LinJ.BallA. A.ZhengJ. J.Surface modelling and mesh generation for simulating superplastic deformation. J. Mater. Processing Technol., 1998, 80-81, 613–619.
3.
ComleyP. N.Putting parts into planesSPF comes of age. In Superplasticity in Aerospace (Eds HeikkenenH. C.McNelleyT. R.), 1988, pp. 361–370 (The Metallurgical Society, Warrendale, Pennsylvania).
4.
RhaipuS.The effect of microstructural gradients on superplastic forming of Ti-6A-l-4V. J. Mater. Processing Technol., 1998, 80-81, 90–95.
5.
DunneF. P. E.KimT. W.Modelling heterogeneous microstructures, inhomogeneous deformation and failure in superplasticity. J. Mater. Processing Technol., 1998, 80-81, 96–100.
6.
CheongB. H.LinJ.BallA. A.Modelling of the hardening characteristics for superplastic materials. J. Strain Analysis, 2000, 35(3), 149–157.
7.
GhoshA. K.HamiltonC. H.Mechanical behaviour and hardening characteristics of a superplastic Ti-6AL-4V alloy. Metall. Trans. A, 1979, 10A(6), 699–706.
