Characterizing an electrostatic gripping device for the automated handling of non-rigid materials

Abstract

Electrostatic forces can be used for handling non-rigid materials such as fabrics in an automated manufacturing environment but little understanding exists as to how electrostatic gripping forces may be generated on different types of materials and how such forces are related dynamically to the properties of materials being handled and to the design parameters of a gripping device. As such, the design and operation of electrostatic gripping devices must be based on a trial-and-error process. This paper presents a theoretical understanding of the dynamic processes of force generation and removal in a single-pole electrostatic gripping device. Mathematical equations are presented, relating the device's performance (i.e. the gripping force, the pick-up and release times) to various design parameters as well as to the properties of materials being handled. Experimental study is carried out in conjunction with the theoretical analysis to characterize the devices for practical material handling applications. The design and operation of a large gripping device for materials handling tasks in aerospace applications are discussed.

Keywords

electrostatics electrostatic gripping device automated garment assembly automated composite manufacturing robotics

References

Castle

G. S. P.

The evolving field of electrostatics. In 8th International Conference on Electrostatics, Oxford, April 1991, pp. 1–12 (Institute of Physics Publishing, Bristol).

Lee

A. P.

Low power, tight seal, polyimide electrostatic microvalve. In ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, 17–22 November 1996, pp. 345–349.

Cheung

Position sensing and control of an electro-statically-driven polysilicon micro-actuator. In 1995 ASME International Mechanical Engineering Congress and Exposition, San Francisco, California, 12–17 November 1995, pp. 1011–1017.

Shikida

Sato

Harada

Fabrication of an S-shaped microactuator. J. Microelectromech. Syst., 1997, 6(1), 18–24.

Hirano

Application of local temperature control for DNA micromanipulation. In International Symposium on Micro Machine and Human Science, Nagoya, 2–4 October 1996, pp. 177–182.

Dyatlov

V. L.

Kostsov

E. G.

High efficient electrostatic micromotors on the base of thin ferroelectric films. Avtom. Telemekh., May 1999, 5, 3–22.

Marchetti

Gallegos

General contact and hysteresis analysis of multi-dielectric MEMS devices under thermal and electrostatic actuation. Proc. SPIE, 1999, 3680(I), 179–186.

Dilhan

Tasselli

Esteve

Temple-Boyer

Camon

Anduze

Colin

Experimentation of an electrostatically actuated monochip micropump for drug delivery. Proc. SPIE, 1999, 3680(II), 887–896.

Lenahan

K. M.

Liu

Wang

Claus

R. O.

Electrostatic self-assembly processes for noncentrosymmetric thin films and devices. Proc. SPIE, 1999, 3675, 104–112.

10.

Waring

R. W.

Electrostatic force employed to hold work-pieces. In La Physique des Forces Electrostatiques et leurs Applications, 1960, pp. 117–127 (Grenoble).

11.

Abrarov

V. N.

Investigation of the limiting characteristics of electrostatic gripping devices in robot technology. Vest. Mash., 1985, 65(4), 59–62.

12.

Watanabe

Kitabayashi

Nakayama

Electrostatic force and absorption current of alumina electrostatic chuck. Japan J. Appl. Phys., 1992, 31, 2145–2150.

13.

King

Hsu

Huang

H. C.

Yang

S. Y.

Liu

Y. L.

Hsu

K. C.

Ring-type ESD damage caused by electrostatic chuck of ion implanter. Proc. SPIE, 1999, 3743, 214–218.

14.

Monkman

G. J.

Taylor

P. M.

Electrostatic grippers, principles and practice. In Proceedings of the 18th ISIR, 1988, pp. 310–314.

15.

Taylor

P. M.

Monkman

G. J.

Taylor

G. E.

Electrostatic grippers for fabric handling. In Proceedings of the IEEE International Conference on Robotics and Automation, Philadelphia, Pennsylvania, 1988, pp. 431–433.

16.

Taylor

P. M.

Taylor

G. E.

Sensory robotic assembly of apparel at Hull University. J. Intell. Robotic Syst., 1992, 6, 91–94.

17.

Chen

X. Q.

Sarhadi

Investigation of electrostatic force for robotic lay-up of composite fabrics. Mechatronics, 1992, 2(4), 363–373.

18.

Chestney

Zhang

Sarhadi

Robotic handling of carbon fibre materials with electrostatic grippers. In EURISCON'94, Spain, 1994, pp. 695–707.

19.

Jarvis

S. D.

Chen

X. Q.

Wilcox

Sarhadi

Design of handling device for composite ply lay-up automation. In Proceedings of the 1991 International Conference on Advanced Robotics, Pisa, Italy, 19–22 June 1991, pp. 778–795.

20.

Hayt

W. H.

Engineering Electromagnetic, 1989 (McGraw Hill, New York).

21.

Monkman

G. J.

Electrostatic techniques for fabric handling. MSc thesis, University of Hull, 1987.

22.

Zhang

Modelling and analysis of electrostatic force for robot handling of fabric materials. IEEE/ASME Trans. Mechatronics, 1999, 4(1), 39–49.