This paper presents a system for the automatic selection of chucking surfaces in turning rotational parts. The general strategy of the system aims to define all the possible set-ups that allow complete machining of the part. Several criteria have been provided to eliminate those set-ups or set-up combinations incompatible with the process constraints. In particular, the developed system takes into account the geometrical shape of both the part and the chuck as well as the dimensions and the tolerances provided by the design. All the related information is saved in standard databases.
JungM. Y.LeeK. H.A CAD/CAPP interface for complex rotationally symmetric parts. Int. J. Prod. Res., 1996, 34(1), 227–251.
2.
PandeS. S.DesaiV. S.Expert CAPP system for single spindle automats. Int. J. Prod. Res., 1995, 33(3), 819–833.
3.
JainP. K.MehtaN. K.PandeyP. C.Automatic cut planning in an operative process planning system. Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1998, 212(B2), 129–140.
4.
YeoS. H.WongY. S.RahmanM.Integrated knowledge-based machining system for rotational parts. Int. J. Prod. Res., 1991, 29(7), 1325–1337.
5.
Bhaskara ReddyS. V.ShunmugamM. S.NarendranT. T.Operation sequencing in CAPP using genetic algorithms. Int. J. Prod. Res., 1999, 37(5), 1063–1074.
6.
van't ErveA. H.KalsH. J. J.XPLANE, a generative computer aided process planning system for part manufacturing. Ann. CIRP, 1986, 35(1), 325–329.
7.
ZhangS.GaoW. D.TOJICAPa system of computer aided process planning for rotational parts. Ann. CIRP, 1984, 33(1), 299–301.
8.
RhoH. M.GeelinkR.van't ErveA. H.KalsH. J. J.An integrated cutting tool selection and operation sequencing method. Ann. CIRP, 1992, 41(1), 517–520.
9.
JuriA. H.SaiaA.de PenningtonA.Reasoning about machining operations using feature-based models. Int. J. Prod. Res., 1990, 28(1), 153–171.
10.
HindujaS.HuangH.Automatic determination of work-holding parameters for turned components. Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1998, 203(B2), 101–112.
11.
HindujaS.BarrowG.TECHTURN: A technologically oriented system for turned components. In First International Conference on Computer Aided Production Engineering, Edinburgh, 1986 (Mechanical Engineering Publications, London).
12.
GiustiF.SantochiM.DiniG.KAPLAN: A knowledge-based approach to process planning of rotational parts. Ann. CIRP, 1989, 38(1), 481–484.
13.
AbdouG.ChengR.TVCAPP, tolerance verification in computer-aided process planning. Int. J. Prod. Res., 1993, 31(2), 393–411.
14.
YangM. Y.LeeS. C.A feature modification framework for the generation of alternative process plans. Int. J. Prod. Res., 1998, 36(7), 1825–1840.
15.
WuH.-C.ChangT.-C.Automated setup selection in feature-based process planning. Int J. Prod. Res., 1998, 36(3), 395–712.
16.
ZhangH.-C.HuangS. H.MeiJ.Operational dimensioning and tolerancing in process planning: Setup planning. Int. J. Prod. Res., 1996, 34(7), 1841–1858.
17.
HuangS. H.ZhangH.-C.OldhamW. J. B.Tolerance analysis for setup planning: A graph theoretical approach. Int. J. Prod. Res., 1997, 35(4), 1107–1124.
