This paper reports progress in the development of assembly-oriented computer aided design (CAD) software, focusing particularly on those elements which employ rule-based and other expert system technology to assist with design for assembly (DFA) analysis. The areas addressed within the CAD environment include proactive design for assembly, assistance with assembly sequence definition and improvement in design effciency by reduction of the part count.
BarnesC. J.DalgleishG. F.JaredG. E. M.SwifitK. G.TateS. J.Assembly sequence structures in design for assembly In Proceedings of IEEE International Symposium on Assembly and Task Planning (ISATP ′97), 1997, pp. 164–169.
2.
BarnesC. J.DalgleishG. F.JaredG. E. M.MeiH.SwiftK. G.Assembly oriented design. In Proceedings of IEEE International Symposium on Assembly and Task Planning (ISATP ′99), 1999, pp. 45–50.
3.
BoothroydG.DewhurstP.Product Design for Assembly, 1989 (Boothroyd Dewhurst Inc., Rhode Island).
4.
MiyakawaS.OhashiT.The Hitachi assemblability evaluation method. In Proceedings of International Conference on Product Design for Assembly, 1986.
5.
Design For Manufacture and Assembly Practitioners Manual, Version 10, 1993 (Lucas Engineering Systems Limited and University of Hull).
6.
BarnesC. J.DalgleishG. F.JaredG. E. M.SwiftK. G.TateS. J.Computer support for proactive DFA. In Second International Symposium on Tools and Methods for Concurrent Engineering (TMCE ′98), Manchester, 1998, pp. 313–320.
7.
MeiH.RobinsonP. A.DalgleishG. F.JaredG. E. M.SwiftK. G.Strategies for expert system support in assembly oriented CAD. In Computer Aided Conceptual Design ′98, Proceedings of the 1998 Lancaster International Workshop on Engineering Design, 1998, pp. 231–242.
8.
HolbrookA.SackettP.Design for assembly through knowledge application. Assembly Automn., May 1990, 10(2), 87–92.
9.
WilsonR.RitJ.Maintaining geometric dependencies in assembly planning. In Computer-Aided Mechanical Assembly Planning, 1991, pp. 217–239 (Kluwer Academic Publishers, New York).
10.
De FazioT.WhitneyD.Simplified generation of all mechanical assembly sequences. IEEE Trans. Robotics and Automn, December 1987, RA-3(6), 640–658.
11.
SandersonA.Homem de MelloL.AND/OR graph representation of assembly plans. IEEE Trans. Robotics and Automn, 1990, 6(2), 188–199.
12.
CLIPS Advanced Programming Guide, Version 6.10, August 1998 (Software Technology Branch, Lyndon B. Johnson Space Center).
13.
JaredG.LimageM.SherrinI.SwiftK.Geometric reasoning and design for manufacture. Computer Aided Des., 1994, 26(7), 528–536.
