Abstract
Abstract
Stress intensity factors for semi-elliptical surface cracks located at the centre of a semicircular edge notch in a finite thickness plate subjected to a remote tensile load are presented in a tabulated format. A wide range of geometry ratios are considered. They are all combinations of the following ratios: the ratio of crack surface half-length to plate half-thickness, c/t = 0.2, 0.4, 0.6, 0.8 and 0.95; the ratio of crack depth to surface half-length, a/c = 0.2, 0.4, 0.6, 0.8 and 1; and the ratio of notch radius to plate half-thickness, r/t = 0.5, 1, 2 and 3. Both the quarter-point displacement and J.-integral methods based on three-dimensional finite element analyses were employed for the calculation of stress intensity factors. The calculation accuracy was studied by analysing the J.-integral path independence and comparing stress intensity factor results with other solutions available in the literature.
Get full access to this article
View all access options for this article.