The machining of an idealized glass fibre reinforced plastic (GFRP) was examined using photo-elasticity, dynamometry and optical microscopy. Cutting stresses at the glass roving and roving-matrix interface were evaluated using experimental and numerical methods. Experimentally observed isochromatics and measured forces in the orthogonal cutting of GFRP were shown to be affected by the reinforcement and its orientation. Machining stresses and machined surface damage were found to be highest when machining materials with roving oriented 45° towards the cutting edge.
WangD. H.RamuluM.ArolaD.Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: Unidirectional laminate. Int. J. Machine Tools and Mf., 1995, 35, 1623–1638.
5.
EverstineG. C.RogersT. G.A theory of machining of fiber-reinforced materials. J. Composite Mater., 1971, 5, 94–106.
6.
WernC. W.RamuluM.ShuklaA.Investigation of stresses in the orthogonal cutting of fiber reinforced plastics. Expl Mechanics, 1996, 36, 33–41.
7.
SampsonR. C.A stress-optic law for photoelastic analysis of orthotropic composites. Expl Mechanics, 1970, 10, 210–215.
8.
PipesR. B.RoseJ. L.Strain-optic law for a certain class of birefringent composites. Expl Mechanics, 1974, 14, 355–360.
9.
LekhnitskiiS. G.Theory of Elasticity of an Anisotropic Body, 1981 (MIR Publishers, Moscow).
10.
InoueH.IdoM.Photoelastic analysis of the effect of residual stress on the deformation of unidirectional glass fiber reinforced plastics at the wedge indentation. J. Jap. Soc. Composite Mater., 1981, 7, 147–153.
11.
KobayashiA.Machining of Plastics, 1967 (McGraw-Hill, New York).
12.
InoueH.IdoM.Photoelastic analysis of wedge indentation of unidirectional glass fiber reinforced plastic materials. J. Jap. Soc. Composite Mater., 1983, 9, 15–21.
13.
RamuluM.Machining of graphite/epoxy composite materials with polycrystalline diamond (PCD) tools. J. Engng for Industry, 1991, 113, 430–436.
