This paper presents the first results provided by an experimental set-up developed to estimate locally the terms of the energy balance associated with the high-cycle fatigue (HCF) of DP 600 steel. The experimental approach involves two quantitative imaging techniques: digital image correlation and infrared thermography. First, a variational method is used to derive stress fields from the displacement fields. Patterns of deformation energy per cycle can then be determined on the basis of stress and strain data. Second, a local form of the heat equation is used to derive separately the thermoelastic and dissipative sources accompanying HCF. Energy balances show that around 50 per cent of the deformation energy associated with the mechanical hysteresis loop is dissipated while the rest corresponds to stored energy variations.
GaltierA.Contribution à l'étude de l'endommagement des aciers sous sollicitations uni ou multiaxiale. PhD Thesis, Ecole Nationale Supérieure d'Arts et Métiers, Bordeaux, 1993.
2.
LuongM. P.Fatigue limit evaluation of metals using an infrared thermographic technique. Mechanics Mater., 1998, 28, 155–163.
3.
La RosaG.RisitanoA.Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int. J. Fatigue, 2002, 22(1), 65–73.
4.
LiawY. B.WangP. K.JiangL.HuangJ. Y.KuoR. C.HuangJ. C.Thermographic investigation of the fatigue behaviour of reactor pressure vessel steels. Mater. Sci. Engng A, 2001, 314, 131–139.
5.
KrapezJ. C.PacouD.GardetteG.Lock-in thermography and fatigue limit of metals. In Proceedings of the Fifth International Conference on Quantitative Infrared Thermography (QIRT 2000), Reims, France, 8–21 July 2000, pp. 277–282 (QIRT, Lodz, Poland).
6.
KrapezJ. C.PacouD.Thermographic detection of damage initiation during fatigue tests. Thermosense XXIV, Proceedings of the SPIE, Vol. 4710, Orlando, Florida, USA, 1–5 April 2002, pp. 435–449 (SPIE, Bellingham, Washington).
7.
CugyP.GaltierA.Microplasticity and temperature increase in low carbon steels. In Proceedings of the Eighth International Fatigue Congress, Stockholm, Sweden, 2–7 June 2002, pp. 549–556 (EMAS Publishing, Warrington).
8.
MabruC.ChrysochoosA.Dissipation et couplages accompagnant la fatigue des matériaux métalliques. In Photomécanique 2001, Poitiers France, 24–26 April 2001, pp. 375–382 (GAMAC, Paris).
9.
BoulangerT.ChrysochoosA.MabruC.GaltierA.Calorimetric and thermoelastic effects associated with the fatigue behavior of steels. Int. J. Fatigue, 2004, 26, 221–229.
10.
TaylorG. I.QuinneyM. A.The latent energy remaining in a metal after cold working. Proc. R. Soc. A, 1933, 143, 307–326.
11.
BeverM. D.HoltD. L.TitchenerA. L.The stored energy of cold work. Prog. in Mater. Sci., 1973, 17(1), 5–177.
12.
DillonO. W.The heat generated during the torsional oscillation of copper tubes. Int. J. Solids Structs, 1966, 2(2), 181–204.
13.
HarryR.JoubertF.GomaaA.Measuring the actual endurance limit of one specimen using a non-destructive method. Trans. ASME J. Engng Mater. Technol., 1980, 103(1), 71–76.
14.
KaletaJ.Determination of cold work energy in LCF/HCF region. In Proceedings of the Fourth International Conference on Low Cycle Fatigue and Elastoplastic Behaviour of Materials, Garmisch-Partenkirchen, Germany, 7–11 September 1998, pp. 93–98 (Elsevier, Oxford).
15.
NayrolesB.BoucR.CaumonH.ChezeauxJ. C.Téléthermographie infrarouge et mécanique des structures. Int. J. Engng Sci., 1981, 19, 929–947.
16.
WattrisseB.ChrysochoosA.MuraccioleJ.-M.Nemoz-GaillardM.Analysis of strain localisation during tensile test by digital image correlation. J. Expl Mechanics, 2000, 41(1), 29–38.
17.
BerthelB.ChrysochoosA.WattrisseB.GaltierA.Infrared image processing for the calorimetric analysis of fatigue phenomena. Exp. Mechanics, 2008, 48(1), 79–90.
18.
GermainP.NguyenQ. S.SuquetP.Continuum thermodynamics. J. Appl. Mechanics, 1983, 50, 1010–1020.
19.
ChuT. C.RansonW. F.SuttonM. A.PetersW. H.Application of digital-image-correlation techniques to experimental mechanics. J. Expl Mechanics, 1985, 25, 232–244.
20.
BruckH. A.McNeillS. R.SuttonM. A.PetersW. H.Digital image correlation using Newton-Raphson method of partial differential correction. J. Expl Mechanics, 1989, 31, 261–267.
21.
ChoiS.ShahS. P.Measurement of deformations on concrete subjected to compression using image correlation. J. Expl Mechanics, 1997, 37, 307–313.
22.
GeymonatG.HildF.PaganoS.Identification of elastic parameters by displacement field measurement. C.R. Mécanique, 2002, 330, 403–408.
23.
LatourteF.ChrysochoosA.PaganoS.WattrisseB.Elastoplastic behavior identification for heterogeneous loadings and materials. Expl Mechanics, 2008, 313. DOI:10.1007/s11340-007-9088-y.
24.
ChrysochoosA.BerthelB.LatourteF.PaganoS.WattrisseB.WeberB.Local energy approach to steel fatigue. Strain, 2007, 43, 273–279. DOI:10.1111/j.1475–1305.
25.
MorabitoA. E.ChrysochoosA.DattomaV.GaliettiU.Analysis of heat sources accompanying the fatigue of 2024 T3 aluminium alloys. Int. J. Fatigue, 2007, 29, 977–984.
26.
BerthelB.GaltierA.WattrisseB.Chry-sochoosA.Fatigue dissipation properties of steel sheets. Strain, 2007, 43(3), 273–279.
27.
LemaitreJ.Course on damage mechanics, 1992 (Springer-Verlag, Berlin).
28.
CharkaluckE.ConstantinescuA.Estimation of thermoplastic dissipation in high cycle fatigue. C.R. Mécanique, 2006, 334(6), 373–379.
29.
DoudardC.HildF.CallochS.A propabilistic model for multiaxial high cycle fatigue. Fatigue Fracture Engng. Mater. Structs, 2007, 30, 107–114.
30.
DoudardC.PonceletM.CallochS.BouéC.HildF.GaltierA.Determination of an HCF criterion by thermal measurements under biaxial cyclic loading. Int. J. Fatigue, 2007, 29, 748–757.
31.
WongA. K.KirbyG. C.IIIA hybrid numerical/experimental technique for determining the heat dissipated during low cycle fatigue. Engng Fracture Mechanics, 1990, 37(3), 493–504.
32.
HarveyD. P.IIBonenbergerR. J.JrDetection of fatigue macrocracks in 1100 aluminium from thermomechanical data. Engng Fracture Mechanics, 2000, 65, 609–620.
