Evaluation of a numerical model for tapered threaded connections subjected to combined loading using enhanced experimental measurement techniques

Abstract

Threaded connections used in the oil and gas industry have to withstand ever-increasing axial and pressure loads. The structural behavior of these joints can be predicted using numerical models, provided these are soundly validated. Within this article, a finite element model of tapered, shoulderless connections containing a trapezoidal thread type is experimentally validated conducting a test load envelope experiment and a tensile failure test. The evaluation is performed using both conventional and advanced measurement techniques. Surface strains are validated by comparing digital image correlation and strain gage results with the numerical output. An almost perfect quantitative match between the numerically predicted axial strains and the experimentally measured strain gage data is obtained. In addition, a qualitative match can also be observed when considering the axial strains obtained by digital image correlation. Furthermore, infrared thermography measurements are compared to the numerical deformation energy, assuming that temperature is an additional, but indirect parameter to evaluate the validity of the model. From the results, the proposed model has proven to be reliable when a combination of axial tension and internal pressure is applied. While the model is originally designed to predict the connection’s structural behavior for loads up to the yield strength, it is possible to estimate this behavior for higher loads by modifying the contact area.

Keywords

Threaded connection test load envelope tensile digital image correlation thermography

Get full access to this article

View all access options for this article.

References

Galle

De Waele

De Baets

. Effect of make up on the structural performance of standard buttress connections subjected to tensile loading. In: Proceedings of the 2013: pressure vessels & piping division conference, Paris, 14–18 July 2013. New York, NY: ASME.

Galle

De Pauw

De Waele

. Validating numerically predicted make-up of threaded connections using digital image correlation and infrared monitoring. J Strain Anal Eng. Epub ahead of print 13 May 2014. DOI: 10.1177/0309324714533328.

API 5B:1996. Specification for threading, gauging, and thread inspection of casing, tubing and line pipe threads (American Petroleum Institute).

Vinson

. Structural mechanics: the behavior of plates and shells. New York, NY: John Wiley & Sons, 1974, 119 pp.

Van Wittenberghe

De Baets

De Waele

. Modelling of preloaded threaded pipe connections. In: Proceedings of the 8th national congress on theoretical and applied mechanics, Brussels, Belgium, 28–29 May 2009, pp.149–156.

Santus

Bertini

Beghini

. Torsional strength comparison between two assembling techniques for aluminium drill pipe to steel tool joint connections. Int J Pres Ves Pip 2009; 86: 177–186.

Ferjani

Averbuch

Constantinescu

. A computational approach for the fatigue design of threaded connections. Int J Fatigue 2011; 33: 610–623.

Ling

. Uniaxial true stress-strain after necking. AMP J Technol 1996; 5: 37–48.

American Petroleum Institute. WI 2317: tech report on LTC/BTC performance properties and leak resistance: thread compounds. Report, Rev SS-2006, 2006, http://mycommittees.api.org/standards/ecs/sc5/Technical%20Papers/item2317ltcbtcleakresistanceperformanceproperties.pdf

10.

Teodoriu

. Rotary-shouldered connections make-up torque calculation considering the effect of contact pressure on thread compound’s friction coefficient. Oil Gas Eur Mag 2009; 4: 172–178.

11.

Galle

De Waele

Van Wittenberghe

. Optimal make-up torque for trapezoidal threaded connections subjected to combined axial tension and internal pressure loading. In: Proceedings of the 2014: pressure vessels & piping division conference, Anaheim, CA, 20–24 July 2014. New York, NY: ASME.

12.

Sutton

Orteu

J-J

Schreier

. Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. New York, NY: Springer, 2009, 321 pp.

13.

Guangjie

Zhenqiang

Qinghua

. Numerical and experimental distribution of temperature and stress field in API round threaded connection. Eng Fail Anal 2006; 13: 1275–1284.

14.

Pandey

Chand

. Deformation based temperature rise: a review. Int J Pres Ves Pip 2003; 80: 673–687.

15.

Kutin

Ristic

Pruvlovic

. Application of thermography during tensile testing of butt welded joints. FME Trans 2011; 39: 133–138.

16.

Kutin

Ristic

Burzic

. Testing the tensile features of steel specimens by thermography and conventional methods. Sci Tech Rev 2010; 60: 66–70.

17.

Parkus

. Thermoelasticity. 2nd rev. and enl. ed. Wien. New York, NY: Springer Verlag, 1976, viii + 119 pp.

18.

ISO 13679:2006. Petroleum and natural gas industries—procedures for testing casing and tubing connections (European Committee for Standardization).

19.

Haneef

Lahiri

Bagavathiappan

. Study of the tensile behavior of AISI type 316 stainless steel using acoustic emission and infrared thermography techniques. J Mater Res Technol, 2015; 4: 241–253.

20.

Donato

Belongie

. Approximate thin plate spline mappings. In: Proceedings of the 7th European conferences computer vision (ECCV 2002; Part III, LNCS), vol. 2352, Copenhagen, Denmark, 28–31 May 2002, pp.21–31. London: Springer-Verlag.

21.

Crysochoos

Huon

Jourdan

. Use of full-field digital image correlation and infrared thermography measurements for the thermomechanical analysis of material behavior. Strain 2010; 46: 117–130.