The effects of borate pre-treatment on the acidity and colour changes in wood during heat treatment were investigated. Borate pretreatment reduced the build-up of wood acid, which, commonly occurs during heat treatment. This therefore suggests prevention of degradation of the hemicelluloses. There was a decrease in colour intensity during the heat treatment of wood pre-treated with borate buffer. This results in the production of material darker in colour after heat treatment. However, heat treatment itself without borate impregnation does not have any appreciable effects on wood colour and this was thought to be an indication of the possibility of differences in the effects of heat treatment on wood colour in different wood species.
Lost of colour however is by no means a limitation to the use of borate in mitigating the deleterious effects of heat treatment since the darker colour can serve as a boost to the aesthetic value of wood.
BHUIYANM. T. R., HIRAIN. and SOBUEN.2000. Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. Journal of Wood Sci., 46(6): 431–436.
2.
DWIANTOW., MOROOKAT. and NORIMOTOM. 1998. The compressive stress relaxation of albizia (Paraserienthes falcate Becker) wood during heat treatment. Mokliz7ai Gakkaishi. 44(6): 403–409.
3.
GEISSENA. and DuQ. P. 1995. Influence of heat treatment on the accuracy of wood moisture content determination by electrical resistance-type meters. Holz als Roh und Werkstoff. 53(5): 303–307.
4.
HANGERJ.; HUBERH.; LACKNERR.; WIMMERR. and FELLNERJ.2002. Improving the natural durability of heat-treated spruce, pine and beech. Holzforschung und Holzverwertung. 54(5): 92–93.
5.
HODGIND. A. and LEEA. W. C. 2002. Comparison of strength properties and failure characteristics between fife-retardant-treated and untreated roofing lumber after long-term exposure: A South Carolina case study. Forest Products Journal, 52(6): 91–94.
6.
KAMDEMD. P., PIZZIA. and TRIBOULOTM. C. 2000. Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation. Holz als Roh und Werkstoff, 58(4): 253–257.
7.
KAMDEMD. P., PIZZIA. and JERMANNAUDA. 2002. Durability of heat-treated wood. Holz als Roh und Werkstoff, 60(1): 1–6.
8.
KUBOJIMAY., OKANOT. and OHTAM. 2000. Bending strength and toughness of heat-treated wood. Journal of Wood Science, 46(1): 8–15.
9.
ManninenA. M.; PasanenP. and HolopainenJ. K.2002. Comparing the emissions between air-dried and heat-treated Scots pine wood. Atmospheric Environment, 36(11): 1763–1768.
10.
MARUYAMAS., ISHIGURIF., ANDOHM., ABEZ., YOKOTAS., TAKAHASHIK. and YOSHIZAWAN. 2001: Reddening by UV irradiation after smoke-heating in sugi (Cryptomeria japonica D. Don) black heartwood. Holzforschung, 55(4): 347–354.
11.
NOGIM., YAMAMOTOH. and OKUYAMAT. 2003. Relaxation mechanism of residual stress inside logs by heat treatment: chosing the heating time and temperature. Journal of Wood Science. 49(1): 22–28.
12.
OBATAYAE., TANAKAF., NORIMOTOM. and TOMITAB. 2000. Hygroscopicity of heat-treated wood. I. Effects of after-treatments on the hygroscopicity of heat-treated wood. Mokuzai Gakkaishi. 46(2): 77–87
13.
OBATAYAE. and TOMITAB. 2002. Hygroscopicity of heat-treated wood. II. Reversible and irreversible reductions in the hygroscopicity of wood due to heating. Mokuzai Gakkaishi. 48(4): 288–295.
14.
RAPPA. O. and SAILERM. 2001. Oil-heat-treatment of wood-process and properties. Drvna Industrija. 52(2): 63–70.
15.
ROWELLR. M. 1997. Property enhanced natural fibre composite materials based on chemical modification. Proceedings of the Fourth International Conference on Frontiers of Polymers and Advanced Materials. January 4–7, 1997, Cairo Egypt.
16.
SAILERM., RAPPA. O., LEITHOFFH. and PEEKR. D. 2000. Upgrading of wood by application of an oil-heat treatment. Holz als Roh und Werkstoff.58(1/2): 15–22.
17.
TejadaA.; OkuyamaT.; YamamotoH. and YoshidaM. 1997. Reduction of growth stresses in log by direct heat treatment: Assessment of a commercial scale operation. Forest Products Journal. 47(9): 86–93.
18.
TEJADAA., OKUYAMAT., YAMAMOTOH., YOSHIDAM., IMAIT. and ITOHT. 1998. Studies on the softening point of wood powder as a basis for understanding the release of residual stresses in logs. Forest Products Journal. 48(7-8): 84–90.
19.
TJEERDSMAB. F., BOONSTRAM., PIZZIA., TEKELYP. and MILITZH. 1998. Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz als Roh und Werkstoff, 56(3): 149 — 153.
20.
UDAKAE. and FURUNOT. 2003. Change in crystalline structure of compressed wood by treatment with a closed heating system. Mokuzai Gakkaishi, 49(1): 1 — 6.
21.
WINANDYJ. E. 1997. Effects of fire retardant retention, borate buffers, and redrying temperature after treatment on thermal-induced degradation. Forest Products Journal, 47(6): 79 — 86.
