The fibre saturation point of wood is of tremendous importance both to the processing and properties of the material and as a result research on the various possible ways of estimating it can hardly be overemphasized. The rates of adsorption and desorption of water by wood were measured at various moisture contents. Fibre saturation point was estimated from the adsorption terminal and the intercept of the adsorption and desorption curves. The values obtained were compared with those obtained using the Walker's method. The use of the adsorption-desorption intercept method gave a mean accuracy of 96.1%.
AHLGRENP. A., WOODJ. R. and GORINGD. A. I. 1972. The fibre saturation point of various morphological subdivisions of Douglas-fir and Aspen wood. Wood Science and Technology, 6(2): 81 — 84.
2.
ANTTIL. 1995. Microwave drying of pine and spruce. Holz als Roh und Werkstoff, 53(5): 333 — 338.
3.
CHAFES. C. 1985. The distribution and interrelationship of collapse, volumetric shrinkage and moisture content and density in trees of Eucalyptus regnans F. Muell. Wood Science and Technology, 19(4): 329 — 345.
4.
PANSHINA. J. and DEZEEUWC. 1980. Textbook of Wood Technology. McGraw-Hill Publishing Company. 722pp.
5.
SINGHY. and GOSWANIN. L. 1982. Effects of seasoning on compressive strength and modulus of rupture of Mangifera indica and Eugenia jambolana woods. Journal of the Indian Academy of Wood Science, 13(1): 30 – 33.
6.
WALKERJ. C. F. 1993. Primary wood Processing. Principle and Practise. First edition. Chapman and Hall. 595pp.
