Studying structure and chemistry of wood and wood-based materials is the backbone of all wood research and many techniques are at hand to do so. A very valuable modality is X-ray computed tomography (CT), able to non-destructively probe the three-dimensional (3D) structure and composition. In this paper, we elaborate on the use of Nanowood, a flexible multi-resolution X-ray CT set-up developed at UGCT, the Ghent University Centre for X-ray Tomography. The technique has been used successfully in many different fields of wood science. It is illustrated how 3D structural and microdensitometrical data can be obtained using different scan set-ups and protocols. Its potential for the analysis of modified wood is exemplified, e.g. for the assessment of wood treated with hydrophobing agents, localisation of modification agents, pathway analysis related to functional tissues, dimensional changes due to thermal treatment, etc. Furthermore, monitoring of transient processes is a promising field of activity too.
AhmedSA, Sehlstedt-PerssonM, HanssonL, MorénT. 2013a. Evaluation of preservative distribution in thermally modified European aspen and birch boards using computed tomography and scanning electron microscopy.J. Wood Sci., 59: 57–66.
2.
AhmedSA, HanssonL, MorénT. 2013b. Distribution of preservatives in thermally modified Scots pine and Norway spruce sapwood.Wood Sci. Technol., 47: 499–513.
3.
BiziksV, AndersonsB, BeļkovaL, KapačaE, MilitzH. in press. Changes in the microstructure of birch wood after hydrothermal treatment. Wood Sci. Technol, 47: 717–735.
4.
BooneM, De WitteY, DierickM, Van den BulckeJ, VlassenbroeckJ, Van HoorebekeL. 2009. Practical use of the modified Bronnikov algorithm in micro-CT, Nucl.Instrum. Meth. A, 267: 1182–1186.
5.
BoonstraMJ, RijsdijkJF, SanderC, KegelE, TjeerdsmaBF, MilitzH, Van AckerJ, StevensM. 2006. Physical aspects of heat-treated wood. Part 1. Softwoods. Maderas. Ciencia y tecnología, 8: 193–208 & Part 2. Hardwoods. Maderas. Ciencia y tecnología: 8, 209–217.
6.
BrabantL, VlassenbroeckJ, De WitteY, CnuddeV, BooneM, DewanckeleJ, Van HoorebekeL. 2011. Three-dimensional analysis of high-resolution X-ray computed tomography data with Morpho+.Microsc. Microanal., 17: 252–263.
De RidderM, Van den BulckeJ, VansteenkisteD, Van LooD, DierickM, MasschaeleB, De WitteY, MannesD, LehmannE, BeeckmanH, Van HoorebekeL, Van AckerJ. 2011. High-resolution proxies for wood density variations in Terminalia superba.Ann. Bot-London, 107: 293–302.
9.
DeromeD, GriffaM, KoebelM, CarmelietJ. 2011. Hysteretic swelling of wood at cellular scale probed by phase-contrast X-ray tomography.J. Struct. Biol., 173: 180–190.
10.
De VetterL, CnuddeV, MasschaeleB, JacobsP, Van AckerJ. 2006. Detection and distribution analysis of organosilicon compounds in wood by means of SEM-EDX and micro-CT.Mater. Charact., 56: 39–48.
11.
De WitteY, BooneM, VlassenbroeckJ, DierickM, Van HoorebekeL. 2009. Bronnikov-aided correction for X-ray computed tomography.J. Opt. Soc. Am. A, 26: 890–894.
12.
De WitteY. 2010. Improved and practically feasible reconstruction methods for high resolution X-ray tomography. PhD thesis. Ghent University, Belgium.
13.
DierickM, Van LooD, MasschaeleB, BooneM, Van HoorebekeL. 2010. A LabVIEW® based generic CT scanner control software platform.J. X ray Sci. Technol., 18: 451–461.
14.
EstevesBM, PereiraHM. 2009. Wood modification by heat treatment: a review.Bioresour., 4: 370–404.
15.
FaesselM, DeliséeC, BosF, CastéraP. 2005. 3D Modelling of random cellulosic fibrous networks based on X-ray tomography and image analysis.Comp. Sci. Technol., 65: 1931–1940.
16.
ForsbergF, MooserR, ArnoldM, HackE, WyssP. 2008. 3D micro-scale deformations of wood in bending: Synchrotron radiation μCT data analyzed with digital volume correlation.J. Struct. Biol., 164: 255–262.
17.
ForsbergF, SjödahlM, MooserR, HackE, WyssP. 2010. Full three-dimensional strain measurements on wood exposed to three-point-bending: analysis by use of digital volume correlation applied to synchrotron radiation micro-computed tomography image data.Strain, 46: 47–60.
18.
GrosoA, AbelaR, StampanoniM. 2006. Implementation of a fast method for high resolution phase contrast tomography.Opt. Express, 14: 8103–8110.
19.
HassP, WittelFK, McDonaldSA, MaroneF, StampanoniM, HerrmannHJ, NiemzP. 2010. Pore space analysis of beech wood: The vessel network.Holzforschung, 64: 639–644.
KucerovaI. 2012. Methods to measure the penetration of consolidant solutions into ‘dry’ wood.J. Cult. Herit., 13(3): 191–195.
22.
LazarescuC, WatanabeK, AvramidisS. 2010. Density and moisture profile evolution during timber drying by CT scanning measurements.Dry. Technol., 28: 460–467.
23.
MannesD, MaroneF, LehmannE, StampanoniM, NiemzP. 2010. Application areas of synchrotron radiation tomographic microscopy for wood research.Wood Sci. Technol., 44: 67–84.
24.
MasschaeleBC, CnuddeV, DierickM, JacobsP, Van HoorebekeL, VlassenbroeckJ. 2007. UGCT: New x-ray radiography and tomography facility.Nucl. Instrum. Meth. A, 580: 266–269.
25.
PaganinDM, MayoSC, GureyevTE, MillerPR, WilkinsSW. 2002. Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object.J. Microsc., 206: 33–40.
26.
RowellRM. 2006. Chemical modification of wood: a short review.Wood Mater. Sci. Eng., 1: 29–33.
27.
ScholzG, Van den BulckeJ, BooneM, ZauerM, BauckerE, Van AckerJ, MilitzH. 2010a. Investigation on wax-impregnated wood. Part 1: Microscopic observations and 2D X-ray imaging of distinct wax types.Holzforschung, 64: 581–585.
28.
ScholzG, ZauerM, Van den BulckeJ, Van LooD, PfriemA, Van AckerJ, MilitzH. 2010b. Investigation on wax-impregnated wood. Part 2: Study of void spaces filled with air by He pycnometry, Hg intrusion porosimetry, and 3D X-ray imaging.Holzforschung, 64: 587–593.
29.
SvedströmK, LuceniusJ, Van den BulckeJ, Van LooD, ImmerzeelP, SuuronenJ.-P, BrabantL, Van AckerJ, SaranpääP, FagerstedtK. 2012. Hierarchical structure of juvenile hybrid aspen xylem revealed using X-ray scattering and microtomography.Trees – Struct. Func., 26: 1793–1804.
30.
Van den BulckeJ, MasschaeleB, DierickM, Van AckerJ, StevensM, Van HoorebekeL. 2008. Three-dimensional imaging and analysis of infested coated wood with X-ray submicron CT.Int. Biodeterior. Biodegrad., 61: 278–286.
31.
Van den BulckeJ, BooneM, Van AckerJ, StevensM, Van HoorebekeL. 2009a. X-ray tomography as a tool for detailed anatomical analysis.Ann. For. Sci., 66: 508.
32.
Van den BulckeJ, BooneM, Van AckerJ, Van HoorebekeL. 2009b. Three-dimensional X-ray imaging and analysis of fungi on and in wood.Microsc. Microanal., 15: 395–402.
33.
Van den BulckeJ, Van AckerJ, De SmetJ. 2009c. An experimental set-up for real-time continuous moisture measurements of plywood exposed to outdoor climate.Build Environ, 44: 2368–2377.
34.
Van den BulckeJ, BooneM, Van AckerJ, Van HoorebekeL. 2010. High-resolution X-ray imaging and analysis of coatings on and in wood.J. Coat. Technol. Res., 7: 271–277.
35.
Van den BulckeJ, De WindtI, DefoirdtN, Van AckerJ. 2011a. Non-destructive evaluation of wood decay. The International Research Group on Wood Protection. Document No. IRG/WP/11-20479.
36.
Van den BulckeJ, De WindtI, DefoirdtN, De SmetJ, Van AckerJ. 2011b. Moisture dynamics and fungal susceptibility of plywood.Int. Biodeterior. Biodegrad., 65: 708–716.
37.
Van den BulckeJ, De RidderM, DiéA, ToirambéB, VansteenkisteD, HubauW, Van LooD, DierickM, MasschaeleB, De WitteY, BeeckmanH, Van HoorebekeL, Van AckerJ. 2012. Microdensitometry of tropical wood using helical X-ray tomotgrpahy: a proxy for dendroclimatology and forest management. Proceedings of 2012 IUFRO Conference on Division 5 Forest Products, Lisbon, Portugal, July 2012. p. 160.
VlassenbroeckJ, DierickM, MasschaeleB, CnuddeV, Van HoorebekeL, JacobsP. 2007. Software tools for quantification of X-ray microtomography at the UGCT.Nucl. Instrum. Meth. A, 580: 442–445.
40.
WaltherT. 2006. Methoden zur qualitativen und quantitativen Analyse der Mikrostruktur von Naturfaserwerkstoffen. PhD thesis. University Hamburg, Germany.
41.
WaltherT, ThoemenH. 2009. Synchrotron X-ray microtomography and 3D image analysis of medium density fiberboard (MDF).Holzforschung, 63: 581–587.
42.
WebbS. 1990. From the watching of the shadows, the origins of radiological tomography, Bristol/New York: Adam Hilger.
43.
WernerssonELG, BooneMN, Van den BulckeJ, Van HoorebekeL, Luengo HendriksCL. 2013. Postprocessing method for reducing phase effects in reconstructed microcomputed-tomography data.J. Opt. Soc. Am. A, 30: 455–461.
44.
ZaunerM, KeuneckeD, MoksoR, StampanoniM, NiemzP. 2012. Synchrotron-based tomographic microscopy (SbTM) of wood: development of a testing device and observation of plastic deformation of uniaxially compressed Norway spruce samples.Holzforschung, 66: 973–979.
