Abstract
Tribochemical reactions of phosphites additives on steel surface have been simulated by gas phase lubrication. Trimethylphosphite (TMPi), P(OCH3)3, has been used as model molecule for phosphites additives. It has been introduced under gas phase up to 5 hPa in a new tribometer dedicated to gas phase lubrication. Friction tests have been carried out at ambient temperature and 100°C. Chemical analyses by X-ray photoelectron spectroscopy and by Auger electron spectroscopy have been conducted inside and outside of the track. Two kinds of analysis have been carried out: ex situ and in situ surface analyses after tribological test. Indeed, a new environmentally controlled tribometer allows friction test then accurate analyses without air exposure of the formed tribofilm. Tribotests conducted under TMPi gas phase show a reduction of friction coefficient until 0˙2 instead of 1˙4 under high vacuum. Jointly, formation of tribofilm has been confirmed by optical microscopy and ex situ chemical analysis. Comparison between analyses performed inside and outside of the wear scar indicates that the friction induces the formation of phosphide compound that could reduce friction. Moreover analyses show the formation of methoxy group (CH3O) and carbonate originally from the decomposition of TMPi under friction into H2 and CO. In situ analyses clearly show the importance to investigate an uncontaminated tribofilm in order to obtain a better characterisation of it and then a better comprehension of the tribochemical mechanisms.
Get full access to this article
View all access options for this article.