A polymerised complex route, based on polyesterification between tartaric acid–zirconium complex and ethylene glycol (EG), has been demonstrated to synthesise ZrC powders at a relatively low temperature (1300°C). The Fourier transform infrared results confirmed the coordination of tartaric acid to the zirconium ion. Furthermore, this complex reacted with EG through polyesterification to immobilise the metal ion in the rigid polymer. The intimate mixing of the reaction components has thus been achieved in ZrO2/carbon ‘coke” due to the suppression of segregation of the reaction components during pyrolysis. Finally, well crystallised ZrC nanoparticles (50–150 nm) were obtained through the carbothermal reduction of ZrO2/carbon ‘coke’, concerning the formation of the intermediate oxycarbide phase.
AngC., WilliamsT., SeeberA., WangH. and ChengY. B.: ‘Synthesis and evolution of zirconium carbide via sol–gel route: features of nanoparticle oxide–carbon reactions’, J. Am. Ceram. Soc., 2013, 96, 1099–1106. doi: 10.1111/jace.12260
2.
SimonenkoaE. P., Sevast'yanovaD. V., SimonenkoaN. P., Sevast'yanovaV. G. and KuznetsovN. T.: ‘Promising ultra-high-temperature ceramic materials for aerospace applications’, Russ. J. Inorg. Chem., 2013, 58, 1669–1693. doi: 10.1134/S0036023613140039
3.
TaoX. Y., WeiX. Y., ChenQ., LuW. Z., MaM. and ZhaoT.: ‘Mechanical, thermal and oxidation properties of refractory hafnium and zirconium compounds’, Adv. Appl. Ceram., 2013, 112, 301–305. doi: 10.1179/1743676113Y.0000000076
4.
WuH., XieC., ZhangW. and ZhangJ.: ‘Fabrication and properties of 2D C/C–ZrB2–ZrC–SiC composites by hybrid precursor infiltration and pyrolysis’, Adv. Appl. Ceram., 2013, 112, 366–373. doi: 10.1179/1743676113Y.0000000092
5.
YanC. L., LiuR. J., CaoY. B., ZhangC. R. and ZhangD. K.: ‘Synthesis of submicrometer zirconium carbide formed from inorganic–organic hybrid precursor pyrolysis’, J. Sol-Gel Sci. Technol., 2012, 64, 251–256. doi: 10.1007/s10971-012-2854-z
6.
EickB. M. and YoungbloodJ. P.: ‘Carbothermal reduction of metal-oxide powders by synthetic pitch to carbide and nitride ceramics’, J. Mater. Sci., 2009, 44, 1159–1171. doi: 10.1007/s10853-009-3249-6
7.
MaitreA. and LefortP.: ‘Solid state reaction of zirconia with carbon’, Solid State Ionics, 1997, 104, 109–122. doi: 10.1016/S0167-2738(97)00398-6
8.
PreissH., SchierhornE. and BzezinkaK. W.: ‘Synthesis of polymeric titanium and zirconium precursors and preparation of carbide fibres and films’, J. Mater. Sci., 1998, 33, 4697–4706. doi: 10.1023/A:1004428818457
9.
GiordanoC., ErpenC., YaoW., MilkeB. and AntoniettiM.: ‘Metal nitride and metal carbide nanoparticles by a soft urea pathway’, Chem. Mater., 2009, 21, 5136–5144. doi: 10.1021/cm9018953
10.
XieY. L., SandersT. H. and SpeyerR. F.: ‘Solution-based synthesis of submicrometer ZrB2 and ZrB2–TaB2’, J. Am. Ceram. Soc., 2008, 91, 1469–1474. doi: 10.1111/j.1551-2916.2008.02288.x
11.
YanC. L., LiuR. J., CaoY. B., ZhangC. R. and ZhangD. K.: ‘Carbothermal synthesis of submicrometer zirconium carbide from polyzirconoxane and phenolic resin by the facile one-pot reaction’, J. Am. Ceram. Soc., 2012, 95, 3366–3369. doi: 10.1111/j.1551-2916.2012.05456.x
12.
KakihanaM.: ‘Sol–gel preparation of high temperature superconducting oxides’, J. Sol-Gel Sci. Technol., 1996, 6, 7–55. doi: 10.1007/BF00402588
13.
TsayJ. D. and FangT. T.: ‘Effects of molar ratio of citric acid to cations and of pH value on the formation and thermal-decomposition behavior of barium titanium citrate’, J. Am. Ceram. Soc., 1999, 82, 1409–1415. doi: 10.1111/j.1151-2916.1999.tb01931.x
14.
RosarioA. V. and PereiraE. C.: ‘The effect of composition variables on precursor degradation and their consequence on Nb2O5 film properties prepared by the Pecchini method’, J. Sol-Gel Sci. Technol., 2006, 38, 233–240. doi: 10.1007/s10971-006-7997-3
15.
BergerL. M., GrunerW., LangholfE. and StolleS.: ‘On the mechanism of carbothermal reduction processes of TiO2 and ZrO2’, Int. J. Refract. Met. Hard Mater., 1999, 17, 235–243. doi: 10.1016/S0263-4368(98)00077-8
16.
DavidJ., TrolliardG., GendreM. and MaîtreA.: ‘TEM study of the reaction mechanisms involved in the carbothermal reduction of zirconia’, J. Eur. Ceram. Soc., 2013, 33, 165–179. doi: 10.1016/j.jeurceramsoc.2012.07.024
17.
TsayJ. D., FangT. T., GubiottiT. A. and YingJ. Y.: ‘Evolution of the formation of barium titanate in the citrate process: the effect of the pH and the molar ratio of barium ion and citric acid’, J. Mater. Sci., 1998, 33, 3721–3727. doi: 10.1023/A:1004636219542
18.
DakanaliM., KefalasE. T., RaptopoulouC. P., TerzisA., MavromoustakosT. and SalifoglouA.: ‘Synthesis and spectroscopic and structural studies of a new cadmium(II)–citrate aqueous complex. Potential relevance to cadmium(II)–citrate speciation and links to cadmium toxicity’, Inorg. Chem., 2003, 42, 2531–2537. doi: 10.1021/ic0205029
19.
GendreM., MaîtreA. and TrolliardG.: ‘Synthesis of zirconium oxycarbide (ZrCxOy) powders: influence of stoichiometry on densification kinetics during spark plasma sintering and on mechanical properties’, J. Eur. Ceram. Soc., 2011, 31, 2377–2385. doi: 10.1016/j.jeurceramsoc.2011.05.037
20.
KatohY., VasudevamurthyG., NozawaT. and SneadL. L.: ‘Properties of zirconium carbide for nuclear fuel applications’, J. Nucl. Mater., 2013, 441, 718–742. doi: 10.1016/j.jnucmat.2013.05.037
21.
DolléM., GossetD., BogicevicC., KarolakF., SimeoneD. and BaldinozziG.: ‘Synthesis of nanosized zirconium carbide by a sol–gel route’, J. Eur. Ceram. Soc., 2007, 27, 2061–2067. doi: 10.1016/j.jeurceramsoc.2006.06.005
22.
RoustilaA., CheneJ. and SeveracC.: ‘XPS study of hydrogen and oxygen interactions on the surface of zirconium’, J. Alloys Compd, 2003, 356-357, 330–335. doi: 10.1016/S0925-8388(03)00356-6
23.
ZhaoH. S., LiuB., ZhangK. H. and TangC. H.: ‘Microstructure analysis of zirconium carbide layer on pyrocarbon-coated particles prepared by zirconium chloride vapor method’, Nucl. Eng. Des., 2012, 251, 443–448. doi: 10.1016/j.nucengdes.2011.10.001
24.
WonY. S., KimaY. S., VaranasiV. G., KrylioukO., AndersonT. J., SirimanneC. T. and McElwee-WhiteL.: ‘Growth of ZrC thin films by aerosol-assisted MOCVD’, J. Cryst. Growth, 2007, 304, 324–332. doi: 10.1016/j.jcrysgro.2006.12.071
25.
GlasbrennerH., Klewe-NebeniusH., BrunsM., PfennigG., PenzhornR. D. and AcheH. J.: ‘Surface analytical investigation of the tritium getter ZrCo after exposure to various gases’, Microchim. Acta, 1992, 107, 207–217. doi: 10.1007/BF01244474
26.
ShimadaS.: ‘A thermoanalytical study on the oxidation of ZrC and HfC powders with formation of carbon’, Solid State Ionics, 2002, 149, 319–326. doi: 10.1016/S0167-2738(02)00180-7
