Hexagonal boron nitride hBN ceramic was successfully fabricated by pressureless sintering at 2100C using submicrometre hBN powders without any sintering additive. The as-prepared hBN ceramic showed a room temperature flexural strength of 30.7MPa. Its flexural strength increased with the increment of temperature in N2 atmosphere, and it retained a strength of 57.2MPa nearly two times of the room temperature strength at 1600C due to clean grain boundaries with no glassy phase. Additionally, the as-prepared hBN ceramic showed a high thermal conductivity of 31.76Wm1k1 and a good thermal shock resistance, which retained a relatively high residual flexural strength of 22.6MPa 73.5 of the original flexural strength at T800C. The as-prepared hBN ceramic presents a good application prospect at high temperature.
LongNN, BiJQ, WangWL, DuM and BaiYJMechanical properties and microstructure of porous BNSiO2Si3N4 composite ceramics, J. Ceram. Int., 2012, 38, 23812387.
2.
XueJX, LiuJX, XieBH and ZhangGJPressureinduced preferential grain growth, texture development and anisotropic properties of hot pressed hexagonal boron nitride ceramics, Scr. Mater., 2011, 65, 966999.
3.
DuanXM, JiaDC, WuZL, TianZ, YangZH, WangSJ and ZhouYEffect of sintering pressure on the texture of hotpress sintered hexagonal boron nitride composite ceramics, Scr. Mater., 2013, 68, 104107.
4.
GhoshJ, MazumdarS, DasM, GhatakS and BasuAKMicrostructural characterization of amorphous and nanocrystalline boron nitride prepared by highenergy ball milling, Mater. Res. Bull., 2008, 43, 10231031.
5.
ZhangJF, TuR and GotoTPreparation of Niprecipitated hBN powder by rotary chemical vapor deposition and its consolidation by spark plasma sintering, J. Alloys Compd, 2010, 502, 371375.
6.
ErtugB ed. Sintering applications, Chap. 2, Powder preparation, properties and industrial applications of hexagonal boron nitride, 3441 2013, Turkey, InTech.
7.
HoeingCL, The United States of America as represented by the United States Department of Energy, Washington, DCHigh density hexagonal boron nitride prepared by hot isostatic, US patent 5116589, published 26 May 1992.
8.
ZhangGJ, ZouJ, NiDW, LiuHT and KanYMBoride ceramics densification, microstructure tailoring and properties improvement, J. Inorg. Mater., 2012, 27, 225233.
9.
HagioT, KobayashiK and YoshidaHSintering of the mechanochemically activated powders of hexagonal boron nitride, J. Am. Ceram. Soc., 1989, 72, 14821484.
10.
LiuJX, KanYM and ZhangGJPressureless sintering of tantalum carbide ceramics without additives, J. Am. Ceram. Soc., 2010, 93, 370373.
11.
LeiYC, BaoXD, LiuJ, ZhuF and ZhangYBLiquid phase sintering of hexagonal boron nitride, J. Jiangsu Univ. Nat Sci Ed, 2005, 26, 357360.
12.
HagioT, KobayashiK, YoshidaT, OgawaI, HaradaH, YasunagaH and NishikawaH, Agency of Industrial Science and TechnologyPressureless sintered body of boron nitride, US patent 5063184, published 5 November 1992.
13.
GeL, YangJ and QiuTStudy progress of preparation methods of hexagonal boron nitride, Electron. Comput. Mater., 2008, 27, 2229.
14.
Standard test method for flexural strength of advanced ceramics at ambient temperature, C116113, ASTM International, West Conshohocken, PA, USA, 2013.
15.
Standard test method for flexural strength of advanced ceramics at elevated temperatures, C121113, ASTM International, West Conshohocken, PA, USA, 2013.
16.
Standard test method for determination of fracture toughness of advanced ceramics at ambient temperature, C142110, ASTM International, West Conshohocken, PA, USA, 2010.
17.
Standard test method for vickers indentation hardness of advanced ceramics, C132708, ASTM International, West Conshohocken, PA, USA, 2008.
18.
Standard test method for dynamic youngs modulus, shear modulus, and poissons ratio for advanced ceramics by impulse excitation of vibration, C125914, ASTM International, West Conshohocken, PA, USA, 2014.
19.
LeiYC, BaoXD, LiuJ and ZhangYBResearch on pressureless sintering of hexagonal boron nitride, Ordnance Mater. Sci. Eng., 2005, 28, 2023.
20.
GuLDNew inorganic nonmetal materialboron nitride ceramics, Chap. 1, Thermal properties, 561982, China, China Architecture Building Press.
