Boron carbide (B4C) ceramics has many outstanding performance, such as extremely high hardness, low density, high melting point, high elastic modulus, high thermoelectromotive force, high chemical resistance, high neutron absorption cross section, high impact and excellent wear resistance. Therefore, B4C ceramics can be used in various industrial applications, such as lightweight ceramic armour, high temperature thermocouples, neutron absorber, reactor control rods in nuclear power engineering, polishing media for hard materials, abrasive media for lapping and grinding, and wear resistant components (blasting nozzles, die tips and grinding wheels). Pressureless sintering is the method with industrialised application value for B4C ceramics, however, it is impossible to sinter pure B4C ceramics to high densities without additives by pressureless sintering. So sintering additives must be used to promote the densification of B4C ceramics. The different sintering additives used to promote the densification of boron carbide will be described in this review, including carbon additives, metallic additives, oxide additives, non-oxide additives, combined additives and rare earth oxide additives. Finally, the recent research trends for sintering methods and sintering additives of B4C ceramics will also be proposed.
MashhadiM, SarafMR, BaghshahiS.Synthesis of boron carbide powder via carbothermic reaction of boron oxide. Int J Eng Sci. 2005;16(1):9–14.
4.
WangLS, YangYB, ZhangJS, 碳化硼烧结动力学和烧结机制[Study on the mechanism and kinetic of boron carbide sintering]. J Cent South Univ Technol. 1999;30(5):505–508. Chinese.
5.
KuzenkovaMA, KislyiPS, GrabchukBL, The structure and properties of sintered boron carbide. J Less-Common Met. 1979;67(1):217–223.
6.
BougoinM, ThevenotF, DuboisJ, Synthèse et caracterisation de ceramiques denses en carbure de bore. J Less-Common Met. 1985;114(2):257–271.
7.
SchwetzKA, GrellnerW.The influence of carbon on the microstructure and mechanical properties of sintered boron carbide. J Less-Common Met. 1981;82:37–47.
8.
LiYY, LiuH, LiTY, 核反应堆用碳化硼芯块常压烧结工艺研究[Study on pressureless sintering of B4C pellets used in nuclear reactors]. Powder Metall Technol. 2017;35(1):53–56. Chinese.
9.
WangLS, YinBY, FangYC.用掺碳活化烧结技术制取碳化硼材料[Boron carbide material fabricated by carbon-doping activated sintering]. Chin J Nonferrous Met. 2002;12(6):1210–1213. Chinese.
10.
YuanYP, JiangHW, ZhengYJ.葡萄糖助剂对无压烧结碳化硼性能的影响[Effect of glucose additives on the properties of pressureless-sintered boron carbide]. J Mudanjiang Normal Univ. 2016;3:36–38. Chinese.
11.
SuzukiH, HaseT, MaruyamaT.炭化ホウ素の焼結に及ぽす炭素の影響[Effect of carbon on sintering of boron carbide]. Ceram Soc Jpn. 1979;87(8):430–433. Japanese.
12.
SchwetzKA, VogtG.Elektroschmelzwerk Kempten Gmbh, Munich, Fed, Rep. of Germany. Process for the production of dense sintered shaped articles of polycrystalline boron carbide by pressureless sintering. United States patent US 4,195, 066.1980 Mar 25.
13.
SiglSL, SchwetzKA.Pressureless sintering of boron carbide with carbon black. In: ZieglerG, HausnerH, editor. Proceedings of Euro-ceramics II. Köln: Deutsche Keramische Gesellschafe e.V.; 1991. Vol. 1, p. 171–182.
14.
LeeH, SpeyerRF.Hardness and fracture toughness of pressureless-sintered boron carbide (B4C). J Am Ceram Soc. 2002;85(5):1291–1293.
15.
DoleSL, ProchazkaS, DoremusRH.Microstructural coarsening during sintering of boron carbide. J Am Ceram Soc. 1989;72(6):958–966.
16.
DoleSL, ProchazkaS.Densification and microstructure development in boron carbide. Ceram Eng Sci Proc. 1985;6(7–8):1151–1160.
17.
SpeyerRF, LeeH.Advances in pressureless densification of boron carbide. J Mater Sci. 2004;39(19):6017–6021.
18.
SchwetzKA, SiglLS, PfauL.Mechanical properties of injection molded B4C–C ceramics. J Solid State Chem. 1997;133:68–76.
19.
SiglLS.Processing and mechanical properties of boron carbide sintered with TiC. J Eur Ceram Soc. 1998;18(11):1521–1529.
20.
NiiharaK.Sumitomo Electric Industries, Inc., Japan. Process for forming a sintered composite boron carbide body. United States patent US 5,637,269. 1997 Jun 10.
ZhaoY, SunKN, WangWL, Microstructure and anisotropic mechanical properties of graphene nanoplatelet toughened biphasic calcium phosphate composite. Ceram Int. 2013;39(7):7627–7634.
23.
LiQS, ZhangYJ, GongHY, Enhanced fracture toughness of pressureless-sintered SiC ceramics by addition of graphene. J Mater Sci Technol. 2016;32(7):633–638.
TanY, ZhangH, PengS.Electrically conductive graphene nanoplatelet/boron carbide composites with high hardness and toughness. Scr Mater. 2016;114:98–102.
26.
GaoDZ, JingJ, YuJC, Graphene platelets enhanced pressureless-sintered B4C ceramics. R Soc Open Sci. 2018;5(4):1–7.
27.
HalversonDC, PyzikAJ, AksayIA.Processing and microstructural characterization of B4C–Al cermets. Ceram Eng Sci Proc. 1985;6(7–8):736–744.
28.
MashhadiM, NassajET, SglavoVM.Pressureless sintering of boron carbide. Ceram Int. 2010;36(1):151–159.
29.
PyzikAJ, AksayIA.Multipurpose boron carbide–aluminium composite and its manufacture via the control of the microstructure. United States patent US 4,702,770. 1987 Oct 27.
30.
BhattacharyaAK, PetrovicJJ.Ductile phase toughening and R-curve behaviour in a B4C–Al cermet. J Mater Sci. 1992;27(8):2205–2210.
31.
StibbsD, ThompsonR.United States Borax & Chemical Corporation, Los Angeles, Calif. Cold-pressed compositions. United States patent US 3,749,571. 1973 Jul 31.
32.
CaiKF, NanCW, MinXM.The effect of silicon addition on thermoelectric properties of a B4C ceramic. Mater Sci Eng B. 1999;67(3):102–107.
33.
WeiHK, ZhangYJ, GongHY.热压烧结工艺制备SiC/B4C复合材料[SiC/B4C composites prepared by hot pressing]. Bull Chin Ceram Soc. 2009;28(2):249–252. Chinese.
34.
XuCM, ZengH, ZhangGJ.Pressureless sintering of boron carbide ceramics with Al–Si additives. Int J Refract Metals Hard Mater. 2013;41:2–6.
35.
FrageN, LevinL, FruminN, Manufacturing B4C–(Al,Si) composite materials by metal alloy infiltration. J Mater Process Technol. 2003;143–144(1):486–490.
MiyazakiH, ZhouY, HyugaH, Microstructure of boron carbide pressureless sintered in an Ar atmosphere containing gaseous metal species. J Eur Ceram Soc. 2010;30(4):999–1005.
38.
IsekiT, KamedaT, MaruyamaT.Interfacial reactions between SiC and aluminium during joining. J Mater Sci. 1984;19(5):1692–1698.
39.
LevinL, FrageN, DarielMP.The effect of Ti and TiO2 additions on the pressureless sintering of B4C. Metall Mater Trans A. 1999;30(12):3201–3210.
40.
LiuWL, TanJ, ZhangHB, 掺硼改性碳化硼陶瓷的研究[Study on boron-doped B4C ceramics]. China Ceramic Industry. 2007;14(5):1–5. Chinese.
41.
GrabchukBL, KislyiPS.Sintering of boron carbide containing small a mounts of free carbon. Sov Powder Metall Met Ceram. 1975;14(7):538–541.
42.
PyzikAJ, BeamanDR.Microstructure and properties of self-reinforced silicon nitride. J Am Ceram Soc. 2010;76(11):2737–2744.
43.
LeeCH, KimCH.Pressureless sintering and related phenomena of Al2O3-doped B4C reaction. J Mater Sci. 1992;27(23):6335–6340.
44.
KimHW, KohYH, KimHE.Densification and mechanical properties of B4C with Al2O3 as a sintering aid. J Am Ceram Soc. 2000;83(11):2863–2865.
45.
JiangHW, FuSN, HuangHL, 添加氧化铝烧结助剂的碳化硼陶瓷无压烧结工艺研究[Pressureless sintering of boron carbide with an addition of alumina]. Powder Metall Technol. 2017;35(6):462–468. Chinese.
46.
SkorokhodV, VlajicMD, KrsticVD.Mechanical properties of pressureless sintered boron carbide containing TiB2 phase. J Mater Sci Lett. 1996;15(8):1337–1339.
SkorokhodV, VlajićMD, KrstićVD.Pressureless sintering of B4C–TiB2 ceramic composites. Mater Sci Forum. 1998;282–283:219–224.
49.
LevinL, FrageN, DarielMP.A novel approach for the preparation of B4C-based cermets. Int J Refract Met Hard Mater. 2000;18(2):131–135.
50.
SkorokhodVV, KrsticVD.Processing, microstructure, and mechanical properties of B4C–TiB2 particulate sintered composites. pressureless sintering and microstructure evolution. Powder Metall Met Ceram. 2000;39(7–8):414–423.
51.
GoldsteinA, GeffenY, GoldenbergA.Boron carbide–zirconium boride in situ composites by the reactive pressureless sintering of boron carbide–zirconia mixtures. J Am Ceram Soc. 2001;84(3):642–644.
52.
XieBY, MaL, GaoDZ, Influence of SiC on phase and microstructure of ZrB2 powders synthesized via carbothermal reduction at different temperatures. Ceram Int. 2018;44(8):8795–8799.
53.
BaharvandiHR, HadianAM, AbdizadehA, Investigation on addition of ZrO2–3 mol% Y2O3 powder on sintering behavior and mechanical properties of B4C. J Mater Sci. 2006;41(16):5269–5272.
54.
RoyTK, SubramanianC, SuriAK.Pressureless sintering of boron carbide. Ceram Int. 2006;32(3):227–233.
55.
BaharvandiHR, HadianAM, AbdizadeH, Investigation on addition of talc on sintering behavior and mechanical properties of B4C. J Mater Eng Perform. 2006;15:280–283.
56.
LiangHQ, YaoXM, ZhangH, The effect of TiC on the liquid phase sintering of SiC ceramics with Al2O3 and Y2O3 additives. Key Eng Mater. 2014;602–603:197–201.
57.
LiangHQ, YaoXM, HuangZR, The relationship between microstructure and flexural strength of pressureless liquid phase sintered SiC ceramics oxidized at elevated temperatures. Ceram Int. 2016;42(11):13256–13261.
58.
JeongK, TatamiJ, IijimaM, Fabrication of Si3N4 ceramics by post-reaction sintering using Si–Y2O3–Al2O3 nanocomposite particles prepared by mechanical treatment. Ceram Int. 2016;42(10):11554–11561.
59.
SuGK, TanDW, GuoWM, Preparation of Si3N4–ZrSi2–ZrN–BN ceramic by reactive hot pressing and its processing properties. J Chin Ceram Soc. 2017;45(6):823–828.
WuGP, JiaoYF, XieFM, 液相烧结碳化硼陶瓷的实验研究[Study on the experiment of liquid phase sintering boron carbide ceramics]. China Ceramics. 2015;51(11):68–70. Chinese.
62.
YamadaS, HiraoK, YamauchiY, Densification behaviour and mechanical properties of pressureless-sintered B4C-CrB2 ceramics. J Mater Sci. 2002;37:5007–5012.
63.
MarekEV, DudnikEM, MakarenkoGN, Physical properties of boron carbide alloys with vanadium and chromium additives. Porosh Metall. 1975;14(2):54–56.
64.
BaharvandiHR, HadianAM.Pressureless sintering of TiB2–B4C ceramic matrix composite. J Mater Eng Perform. 2008;17(6):838–841.
65.
SrivatsanTS, GuruprasadG, BlackD, Influence of TiB2 content on microstructure and hardness of TiB2-B4C composite. Powder Technol. 2005;159(3):161–167.
66.
ZorziJE, PerottoniCA, JornadaJAHD.Hardness and wear resistance of B4C ceramics prepared with several additives. Mater Lett. 2005;59(23):2932–2935.
67.
ZakharievZ, RadevD.Properties of polycrystalline boron carbide sintered in the presence of W2B5 without pressing. J Mater Sci Lett. 1988;7(7):695–696.
68.
ProchazkaS.General Electric Company, Schenectady, N.Y. Dense sintered boron carbide containing beryllium carbide. United States patent US 4,005,235. 1977 Jan 25.
69.
LiXG, JiangDL, ZhangJX, Pressureless sintering of boron carbide with Cr3C2 as sintering additive. J Eur Ceram Soc. 2014;34(5):1073–1081.
70.
RoglP.Refractory metal systems: phase diagrams crystallographic and thermodynamic data. In: EffenbergG, IlyenkoS, editors. Boron-carbon-chromium. Stuttgart: Springer Materials the Landolt-Bornstein Database; 2009. p. 357–383.
71.
KannoY, KawaseK, NakanoK.Additive effect on sintering of boron carbide. Yogyo Kyokai Shi. 1987;95(11):1137–1140.
72.
BougoinM, ThevenotF.Pressureless sintering of boron carbide with an addition of polycarbosilane. J Mater Sci. 1987;22(1):109–114.
73.
MashhadiM, NassajET, MashhadiM, Pressureless sintering of B4C–TiB2 composites with Al additions. Ceram Int. 2011;37(8):3229–3235.
74.
SkorokhodV, KrsticVD.High strength-high toughness B4C–TiB2 composites. J Mater Sci Lett. 2000;19(3):237–239.
75.
WatanaheT, ShoubuK.Mechanical properties of hot-pressed TiB2–ZrO2 composites. J Am Ceram Soc. 1985;68(2):34–36.
76.
PanasyukAD, OreshkinVD, MaslennikovaVR.Kinetics of the reactions of boron carbide with liquid aluminum, silicon, nickel, and iron. Sov Powder Metall Met Ceram. 1979;18(7):487–490.
77.
KimDK, KimCH.Pressureless sintering and microstructural development of B4C–TiB2 composites. Adv Ceram Mater. 1988;3(1):52–55.
78.
MaL, YuJC, GuoX, Pressureless densification and properties of TiB2–B4C composite ceramics with Ni as additives. Micro Nano Lett. 2018;13(7):1–4.
79.
WeaverGQ.Norton company, worcester, mass. Sintered high density boron carbide. United States patent US 4,320,204. 1982 Mar 16.
80.
MoersK, SchroeterK, WolffH.Fried. Krupp Aktiengesellschaft, Essen-on-the-Ruhr, Germany. Hard alloys. United States patent US 1,973,441. 1931 Apr 24.
81.
GuSJ, WangMH, XuHJ, B2O3和Si粉的添加对碳化硼陶瓷性能的影响 [Effects of B2O3 and Si on the properties of boron carbide]. J Ceram. 2016;37(4):329–333.
82.
ZhangXR, ZhangZX, WangWM, Microstructure and mechanical properties of B4C–TiB2–SiC composites toughened by composite structural toughening phases. J Am Ceram Soc. 2017;100(7):3099–3107.
83.
CameronCP.W.R. Grace & Co.-Conn., New York, NY. Ceramic composites containing spinel, silicon carbide, and boron carbide. United States patent US 5,120,681. 1992 Jun 09.
84.
ProchazkaS, CoblenzWS.General electric company. Silicon carbide-boron carbide sintered body. United States patent US 4,081,284. 1978 Mar 28.
85.
KobayashiK, MaedaK, SanoH, Formation and oxidation resistance of the coating formed on carbon material composed of B4C–SiC powders. Carbon. 1995;33(4):397–403.
MuBC, TangLD, ZhangH, 稀土氧化物对碳化硼陶瓷性能的影响[Influence of the rare-earth oxide on the properties of boron carbide ceramics]. Powder Metall Technol. 2008;26(3):187–191. Chinese.
88.
WeiR, ZhangYJ, GongHY, The effect of rare-earth oxide additives on the densification of pressureless sintering B4C ceramics. Ceram Int. 2013;39(6):6449–6452.
89.
SairamK, VishwanadhB, SonberJK, Competition between densification and microstructure development during spark plasma sintering of B4C–Eu2O3. J Am Ceram Soc. 2018;101:2516–2526.
90.
XuJY, WuWY, BianX, GdB6对热压烧结B4C材料性能的影响[Influence of GdB6 on performance of hot-pressing sintering B4C material]. Chinese Rare Eeaths. 2005;26(4):10–14. Chinese.
91.
CelliM, GrazziF, ZoppiM.A new ceramic material for shielding pulsed neutron scattering instruments. Nuclear Instrum Methods Phys Res A. 2006;565(2):861–863.
92.
SunC, LiYK, WangYF, B4c/CeB6 composite ceramic prepared by spark plasma sintering. Rare Met Mater Eng. 2016;45(8):2071–2074.
93.
PanD, LiSF, ZhangX, Effect of graphite content on properties of B4C–W2B5 ceramic composites by in situ reaction of B-Gr-WC. J Am Ceram Soc. 2018;101:3617–3626.
94.
EqtesadiS, MoteallehA, PereraFH, Fabricating geometrically-complex B4C ceramic components by robocasting and pressureless spark plasma sintering. Scr Mater. 2018;145:14–18.
95.
LiuZ, WangD, LiJ, Densification of high-strength B4C–TiB2 composites fabricated by pulsed electric current sintering of TiC-B mixture. Scr Mater. 2017;135:15–18.
96.
RenDL, DengQH, WangJ, Synthesis and properties of conductive B4C ceramic composites with TiB2 grain network. J Am Ceram Soc. 2018;101:1–7.
97.
RenDL, DengQH, WangJ, Densification and mechanical properties of pulsed electric current sintered B4C with in situ synthesized Al3BC obtained by the molten-salt method. J Eur Ceram Soc. 2017;37(15):1–8.
98.
RubinoF, PisaturoM, SenatoreA, Tribological characterization of SiC and B4C manufactured by plasma pressure compaction. J Mater Eng Perform. 2017;26(7):1–12.
99.
MaQC, ZhangGJ, KanYM, 六硼化硅(SiB6)添加剂对B4C陶瓷致密化与力学性能的影响[Densification and mechanical properties of boron carbide ceramics with addition of silicon hexaboride]. J Inorg Mater. 2008;23(6):1175–1178. Chinese.
100.
LeeH, SpeyerRF.Pressureless sintering of boron carbide. J Am Ceram Soc. 2003;86(9):1468–1473.
101.
SairamK, SonberJK, MurthyTSRC, Development of B4C–HfB2 composites by reaction hot pressing. Int J Refract Met Hard Mater. 2012;35(1):32–40.
102.
Grigor'evON, Koval'chukVV, ZaporozhetsOI, Synthesis and physicomechanical properties of B4C–VB2 composites. Powder Metall Met Ceram. 2006;45(1–2):47–58.
103.
SunJL, LiuCX, DuanCY.Effect of Al and TiO2 on sinterability and mechanical properties of boron carbide. Mater Sci Eng A. 2009;509(1):89–93.
104.
Kotsar’TV, DanilovichDP, Ordan'yanSS, Combined carbothermal synthesis of powders in the B4C–SiC–TiB2 system. Refract Ind Ceram. 2017;58(2):174–178.
