The deleterious effect of Al4C3 on the performance of MAX ceramics has not attracted much attention. In the present study, Al4C3 containing Cr2Al(Si)C and SiC/Cr2AlC ceramics have been prepared. It was found that spontaneous pulverisation of the as synthesised samples took place at room temperature after exposure in air and water for various durations. Volume expansion induced by the interaction of Al4C3 with moisture is held responsible for the disintegration of Al4C3 containing MAX ceramics. Preventive measures to avoid the formation of Al4C3 upon preparing MAX ceramics were herein proposed.
LiS. B., SongG. M., KwakernaakC., van der ZwaagS. and SloofW. G.: ‘Multiple crack healing of a Ti2AlC ceramic’, J. Eur. Ceram. Soc., 2012, 32, 1813–1820.
2.
YangH. J., PeiY. T., RaoJ. C., de HossonJ. Th. M., LiS. B. and SongG. M.: ‘High temperature healing of Ti2AlC: on the origin of inhomogeneous oxide scale’, Scr. Mater., 2011, 65, 135–138.
3.
WangX. H. and ZhouY. C.: ‘High-temperature oxidation behavior of Ti2AlC in air’, Oxid. Met., 2003, 59, 303–320.
4.
WangX. H. and ZhouY. C.: ‘Intermediate-temperature oxidation behaviour of Ti2AlC in air’, J. Mater. Res., 2002, 17, 2974–2981.
5.
ByeonJ. W., LiuJ., HopkinsM., FischerW., GarimellaN., ParkK. B., BradyM. P., RadovicM., El-RaghyT. and SohnY. H.: ‘Microstructure and residual stress of alumina scale formed on Ti2AlC at high temperature in air’, Oxid. Met., 2007, 68, 97–111.
6.
LiS. B., ChenX. D., ZhouY. and SongG. M.: ‘Influence of grain size on high temperature oxidation behaviour of Cr2AlC ceramics’, Ceram. Int., 2013, 39, 2715–2721.
7.
LiS. B., XiaoL. O., SongG. M., SloofW. G. and van der ZwaagS.: ‘Oxidation and self-healing behavior of a fine-grained Cr2AlC ceramic’, J. Am. Ceram. Soc., 2013, 96, 892–899.
8.
LinZ. J., LiM. S., WangJ. Y. and ZhouY. C.: ‘High-temperature oxidation and hot corrosion of Cr2AlC’, Acta Mater., 2007, 55, 6182–6191.
9.
TianW. B., WangP. L., KanY. M. and ZhangG. J.: ‘Oxidation behaviour of Cr2AlC ceramics at 1100 and 1250°C’, J. Mater. Sci., 2008, 43, 2785–2791.
10.
LeeD. B. and NguyenT. D.: ‘Cyclic oxidation of Cr2AlC between 1000 and 1300°C in air’, J. Alloys Compd, 2008, 466, 434–439.
11.
WangX. H. and ZhouY. C.: ‘Oxidation behavior of Ti3AlC2 at 1000–1400°C in air’, Corros. Sci., 2003, 45, 891–907.
12.
ZhouY. C., ChenJ. X. and WangJ. Y.: ‘Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1−xSixC2 solid solutions’, Acta Mater., 2006, 54, 1317–1322.
13.
YehC. L. and ChenJ. H.: ‘Combustion synthesis of (Ti1−xNbx)2AlC solid solutions from elemental and Nb2O5/Al4C3-containing powder compacts’, Ceram. Int., 2011, 37, 3089–3094.
14.
YehC. L. and ChenJ. H.: ‘Combustion synthesis of Ti3Si1−xAlxC2 solid solutions from TiC, SiC, and Al4C3-containing powder compacts’, J. Alloys Compd, 2011, 509, 7277–7282.
15.
YehC. L. and KuoC. W.: ‘Effects of Al and Al4C3 contents on combustion synthesis of Cr2AlC from Cr2O3–Al–Al4C3 powder compacts’, J. Alloys Compd, 2011, 509, 651–655.
16.
TianW. B., SunZ. M., DuY. L. and HashimotoH.: ‘Synthesis reactions of Cr2AlC from Cr–Al4C3–C by pulse discharge sintering’, Mater. Lett., 2008, 62, 3852–3855.
17.
BausoumM. W., BrodkinD. and El-RaghyT.: ‘Layered machinable ceramics for high temperature applications’, Scr. Mater., 1997, 36, 535–541.
18.
BausoumM. W., AliM. and El-RaghyT.: ‘Processing and characterization of Ti2AlC, Ti2AlN and Ti2AlC0.5N0.5’, Metall. Mater. Trans. A, 2000, 31A, 1857–1865.
19.
TzenovN. V. and BausoumM. W.: ‘Synthesis and characterization of Ti3AlC2’, J. Am. Cearm. Soc., 2000, 83, 825–832.
20.
IwataT., HattoriE., HashimotoS. and FukudaK.: ‘Synthesis and crystal structure of a new layered carbide ZrAl4C4’, J. Am. Ceram. Soc., 2008, 91, 2713–2715.
21.
SugiuraK., IwataT., YoshidaH., HashimotoS. and FukudaK.: ‘Syntheses, crystal structures and Si solubilities of new layered carbides Zr2Al4C5 and Zr3Al4C6’, J. Solid State Chem., 2008, 181, 2864–2868.
22.
SalamaI., El-RaghyT. and BarsoumM. W.: ‘Synthesis and mechanical properties of Nb2AlC and (Ti,Nb)2AlC’, J. Alloys Compd, 2002, 347, 271–278.
23.
Rodriguez-ReyesM., Pech-CanulM. I., Parga-TorresJ. R., Acevedo-DavilaJ. L., Sanchez-AraizaM. and LopezH. F.: ‘Development of aluminum hydroxides in Al–Mg–Si/SiCp in infiltrated composites exposed to moist air’, Ceram. Int., 2011, 37, 2719–2722.
24.
LloydD. J., LagaceH., McleodA. and MorrisP. L.: ‘Microstructural aspects of aluminium–silicon carbide particulate composites produced by a casting method’, Mater. Sci. Eng. A, 1989, A107, 73–80.
25.
Rodriguez-ReyesM., Pech-CanulM. I., Rendon-AngelesJ. C. and Lopez-CuevasJ.: ‘Limiting the development of Al4C3 to prevent degradation of Al/SiCP composites processed by pressureless infiltration’, Compos. Sci. Technol., 2006, 66, 1056–1062.
26.
ParkJ. K. and LucasJ. P.: ‘Moisture effect on SiCP/6061 Al MMC: dissolution of interfacial Al4C3’, Scr. Mater., 1997, 37, 511–516.
27.
YuW. B., LiS. B. and SloofW. G.: ‘Microstructure and mechanical properties of a Cr2Al(Si)C solid solution’, Mater. Sci. Eng. A, 2010, A527, 5997–6001.
28.
Barsoum1M.W. and RadovicM.: ‘Elastic and mechanical properties of the MAX phases’, Annu. Rev. Mater. Res., 2011, 41, 195–227.
29.
BarsoumM. W.: ‘The MN+1AXN phases: new class of solids; therrnodynamically stable nanolaminates’, Prog. Solid State Chem., 2000, 28, 201–281.
30.
RamS.: ‘Dynamics of formation of self-organized mesoporous AlO(OH).H2O structure in Al-metal surface hydrolysis in humid air’, J. Am. Ceram. Soc., 2003, 86, 2037–43.
31.
Al'myashevaO. V., KorytkovaE. N., MaslovA. V. and GusarovV. V.: ‘Preparation of nanocrystalline alumina under hydrothermal conditions’, Inorg. Mater., 2005, 41, 460–467.
