By close inspection of the well polished cross-sections, two categories of interfaces were classified, namely, adhesive bonding between veneering porcelains and zirconia or alumina cores versus reactive bonding between veneering porcelains and cores of glass infiltrated alumina or lithium disilicate based glass ceramics. Argon ion beam cross-section polishing technique was applied to achieve gentle and fine polishing required for high resolution interfacial characterisation by scanning electron microscopy. The observations suggest that it is desirable to enhance the interfacial reactive bonding in order to avoid delamination in alumina and zirconia based composites.
SteyernPV, EbbessonS, HolmgrenJ, HaagP, NilnerK: ‘Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling’, J. Oral Rehabil., 2006, 33, 682–689.
2.
PallisK, GriggsJA, WoodyRD, GuillenGE, MillerAW: ‘Fracture resistance of three all-ceramic restorative systems for posterior applications’, J. Prosthet. Dent., 2004, 91, 561–569.
3.
AboushelibMN, JagerN, KleverlaanCJ, FeilzerAJ: ‘Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems’, Dent. Mater., 2007, 23, 952–959.
4.
GuazzatoM, AlbakryM, RingerSP, SwainMV: ‘Strength, fracture and microstructure of a selection of all-ceramic materials. Part 1: pressable and alumina glass-infiltrated ceramics’, Dent. Mater., 2004, 20, 441–448.
5.
ZhangY, LawnBR, RekowED, ThompsonVP: ‘Effect of sandblasting on the long-term performance of dental ceramics’, J. Biomed. Mater. Res. B: Appl. Biomater., 2004, 71, 381–386.
6.
KosmacT, OblakC, JevnikarP, FundukN, MarionL: ‘The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic’, Dent. Mater., 1999, 15, 426–433.
7.
TakahashiH, SatoA, TakakuraM, MoriN, BoerderJ, KnollW, CritchellJ: ‘A new method of surface preparation for high spatial resolution EPMA/SEM with an argon ion beam’, Microchim. Acta, 2006, 155, 295–300.
8.
ErdmanN, CampbellR, AsahinaS: ‘Precise SEM cross section polishing via argon beam milling’, Microsc. Today, 2006, 14, 22–25.
9.
GuazzatoM, AlbakryM, QuachL, SwainMV: ‘Influence of grinding, sandblasting, polishing and heat treatment on the flexural strength of a glass-infiltrated alumina-reinforced dental ceramic’, Biomaterials, 2004, 25, 2153–2160.
10.
HuAM, LiangKM, LiM, MaoDL: ‘Effect of nucleation temperatures and time on crystallisation behavior and properties of Li2O–Al2O3–SiO2 glasses’, Mater. Chem. Phys., 2006, 98, 430–433.
11.
AlbakryM, GuazzatoM, SwainMV: ‘Biaxial flexural strength, elastic moduli, and X-ray diffraction charaterization of three pressable all-ceramic materials’, J. Prosthet. Dent., 2003, 89, 374–380.
12.
AlbakryM, GuazzatoM, SwainMV: ‘Influence of hot pressing on the microstructure and fracture toughness of two pressable dental glass-ceramics’, J. Biomed. Mater. Res. B: Appl. Biomater., 2004, 71, 99–107.
13.
HölandW, SchweigerM, FrankM, RheinbergerU: ‘A comparison of microstructure and properties of the IPS Empress 2 and the IPS Empress glass–ceramics’, J. Biomed. Mater. Res., 2000, 53, 297–303.
14.
CattellMJ, PalumboRP, KnowlesJC, ClarkeRL, SamarawickramaDYD: ‘The effect of veneering and heat treatment on the strength of Empress 2 ceramics’, J. Dent., 2002, 30, 161–169.
15.
TopićM, MusićS, RistićS: ‘Study of relaxation in Li2Si2O5 by thermally stimulated depolarization’, Curr. Mater. Chem. Phys., 2002, 76, 236–242.
16.
AguilarDH, Torres-GonzalezLC, Torres-MartinezLM, LopezT, QuintanaP: ‘A study of the crystallization of ZrO2 in the sol–gel system: ZrO2–SiO2’, J. Solid State Chem., 2000, 158, 349–357.
17.
AboushelibMN, KleverlaanCJ, FeilzerAJ: ‘Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics’, Dent. Mater., 2006, 22, 857–863.
18.
ChungKH, HwangYC: ‘Bonding strengths of porcelain repair systems with various surface treatments’, J. Prosthet. Dent., 1997, 78, (3), 267–274.
19.
SatoH, YamadaK, PezzottiG, NawaM, BanS: ‘Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment’, Dent. Mater. J., 2008, 27, (3), 408–414.
