Highly densified TiC, ZrC and HfC based ultrahigh temperature heteromodulus ceramics (HMC), containing 10-50 vol.-% of low modulus phase in the form of particulate graphite, were prepared by hot pressing at 2700°C and 12 MPa in argon atmosphere. The microstructure, elastic characteristics, flexural and compressive static strength, fracture toughness, impact resistance, hardness and thermal expansion were investigated and compared with those available in earlier works for clear understanding the composition-property correlations and anisotropy of this type of HMC composites. Different thermal shock resistant parameters for the HMC were calculated on the basis of obtained experimental data. A new principle of optimum materials design for the compositions in the refractory carbide-graphite systems is exemplified by the TiC-C HMC materials.
ShabalinI. L.: Powder Metall. Met. Ceram., 2008, 47, (1-2), 137–150.
2.
ShabalinI. L., RoachD. L. and ShabalinL. I.: J. Eur. Ceram. Soc., 2008, 28, (16), 3165–3176.
3.
ShabalinI. L., RoachD. L. and ShabalinL. I.: J. Eur. Ceram. Soc., 2008, 28, (16), 3177–3188.
4.
ShabalinI. L.: in ‘Developments in strategic materials: ceramic engineering and science proceedings’, (ed. H.-T. Lin et al.), Vol. 29, 261–278; 2009, New York, John Wiley & Sons.
5.
ShabalinI. L., TomkinsonD. M. and ShabalinL. I.: J. Eur. Ceram. Soc., 2007, 27, (5), 2171–2181.
6.
HasselmanD. P. H., BecherP. F. and MazdiyasniK. S.: Z. Werkstofftech., 1980, 11, (3), 82–92.
7.
HasselmanD. P. H.: J. Am. Ceram. Soc., 1963, 46, (2), 103–104.
8.
ShulzeC. E.: ‘Refractory body having high resistance to flame erosion and thermal shock’, US Patent3165864, 1965.
9.
HaradaY.: ‘Graphite-metal composites. High-strength hot-pressed metal carbide-graphite composites’, Final report NASA-CR-77114, ITT Research Institute, Chicago, IL, USA, 1966.
10.
KendallE. G., CarnahanR. D. and RossiR. C.: Spacel Aeronautics, 1967, 47, (1), 132–133, 135.
11.
CarnahanR. D., JanowskiK. R. and RossiR. C.: J. Am. Ceram. Soc., 1969, 52, (9), 475–477.
12.
RossiR.C. and KendallE. G.: J. Am. Ceram. Soc., 1970, 53, (8), 476–477.
13.
KilinV. S., EvstyukhinA. I. and DergunovaV. S.: Powder Metall. Met. Ceram., 1969, 8, (12), 980–984.
14.
DergunovaV. S., ShurshakovA. N., Posos'evaG. D. and LutsenkoL. N.: Powder Metall Met. Ceram., 1972, 11, (8), 642–647.
15.
SpivakI. I., AndrievskiiR. A. and KlimenkoV. V.: Powder Metall. Met. Ceram., 1974, 13, (3), 244–247.
16.
AvarbeR. G.: in ‘Chemical vapour deposition of refractory inorganic materials’, 3–31; 1976, Leningrad, State Institute of Applied Chemistry.
17.
BeketovA. R., ShabalinI. L. and FedorenkoO. V.: Tsvetn. Met., 1979, 3, 39–42.
18.
GerasimovP. V., EgorovV. S., LaninA. G., NezhevenkoL. B. and SokolovV. A.: Powder Metall Met. Ceram., 1982, 21, (1), 59–64.
19.
RossignolJ. Y., QuenissetJ. M. and NaslainR.: Composites, 1987, 18, (2), 135–144.
20.
UenoK., SodeokaS. and YanoM.: J. Ceram. Soc. Jpn, 1989, 97, (5), 507–512.
21.
GelachovM. V., KhvostunkovA. A., KiikoV. M. and MileikoS. T.: Compos. Sci. Technol, 1994, 5Q (2), 167–178.
22.
SongG.-M., WuY. and LiQ.: J. Eur. Ceram. Soc., 2002, 22, (4), 559–566.
23.
SongG.-M., LiQ., WenG.-W. and ThouY.: Mater. Sci. Eng. A, 2002, A326, 240–248.
24.
SongG.-M., ZhouY. and KangS. J. L.: Mater. Design, 2003, 24, (8), 639–646.
LiJ. L., WangL. J., BaiG. Z. and JiangW.: Scr. Mater., 2005, 52, (9), 867–871.
31.
ShabalinI. L. and ZhangY.: Proc. MRS Int. Materials Research Conf., Chongqing, China, June 2008, MRS, B5–87.
32.
ShabalinI. L., LuchkaM. V. and ShabalinL. I.: Phys. Chem. Solid State, 2007, 8, (1), 159–175.
33.
ShabalinI. L. and RoachD. L.: J. Eur. Ceram. Soc., 2007, 27, (12), 3527–3538.
34.
GorinskiiS. G., ShabalinI. L., KorshunovI. G., BeketovA. R. and KokorinA. F.: Powder Metall. Met. Ceram., 1979, 18, (4), 266–269.
35.
GorinskiiS. G., BeketovA. R., PodkovyrkinM. I., ShabalinI. L. and KokorinA. F.: Powder Metall. Met. Ceram., 1982, 21, (11), 867–871.
36.
KokorinA. F., GorinskiiS. G., BeketovA. R., ShabalinI. L., PokrovskiiM. V. and GulyaevI. G.: High Temp., 1979, 17, (1), 54–56.
37.
GorinskiiS. G., ShabalinI. L., BeketovA. R. and KokorinA. F.: Inorg. Mater., 1979, 15, (10), 1396–1400.
38.
PakholkovV. V., GorinskiiS. G., BeketovA. R., ShabalinI. L. and RagozinS. V.: Powder Metall Met. Ceram., 1986, 25, (8), 661–663.
39.
RichardsonJ. H.: J. Am. Ceram. Soc., 1965, 48, (10), 497–499.
40.
TsangD. K. L., MarsdenB. J., FokS. L. and HallG.: Carbon, 2005, 43, (14), 2902–2906.
41.
HasselmanD. P. H. and DonaldsonK. Y.: in ‘An introduction to ceramic engineering design’, (ed. D. E. Clark et al), 177–198; 2002, Westerville, OH, American Ceramic Society.
42.
CookJ., GordonJ. E., EvansC. C. and MarshD. M.: Proc. R. Soc. Lond. A, 1964, 282A, 508–520.
43.
ShabalinI. L.: in ‘Materials science of refractory compounds: achievements and problems’, (ed. SkorokhodV. V.), 9; 2008, Kyiv, National Academy of Science of Ukraine.
44.
KendallK., Proc. R Soc. Lond. A, 1975, 344A, 287–302.
45.
ZhukovYu. N., CherepanovA. V., BeketovA. R. and ShabalinI. L.: Powder Metall Met. Ceram., 1991, 30, (4), 349–351.
46.
GrigorovichV. K.: ‘Hardness and microhardness’, 230; 1976, Moscow, Nauka.
47.
KendallE. G.: in ‘Modern ceramics: some principles and concepts’, 261–289; 1965, New York, John Wiley & Sons.
48.
BeketovA. R., ShabalinI. L. and FedorenkoO. V.: in ‘Hot pressing’, (ed. DorofeevYu. B.), 71–72; 1979, Novocherkassk Polytechnic Institute.
49.
NiiharaK., BentsenL. D., HasselmanD. P. H. and MazdiyasniK. S.: J. Am. Ceram. Soc., 1981, 64, (9), C-117–C-118.
50.
HasselmanD. P. H.: Ceramurg. Int., 1978, 4, (4), 147–150.
