The dissolution and precipitation behaviours of M7C3 and M23C6 carbides in 8Cr13MoV steel were calculated using Thermo-Calc software. The mechanical properties of carbides were calculated using the Vienna Ab-initio Simulation Package. Results showed that M7C3 carbides were ductile and M23C6 carbides were brittle. High holding temperature provided favourable conditions for M7C3 carbides to precipitate and promoted the dissolution of bulky M23C6 carbides. Two heat treatment sequences were designed. During aging treatment, dispersive rodlike nanoscale M7C3 carbides precipitated from matrix, which improved wear resistance and the retention ability of the cutting edge of knives by 56 and 22%, respectively.
KimHD, KimIS.Effect of austenitizing temperature on microstructure and mechanical properties of 12% Cr steel. ISIJ Int. 1994;34(2):198–204. doi: 10.2355/isijinternational.34.198
2.
TsuchiyamaT, OnoY, TakakiS.Microstructure control for toughening a high carbon martensitic stainless steel. ISIJ Int. 2000;40(supplement):184–188. doi: 10.2355/isijinternational.40.Suppl_S184
3.
ZhuQT, LiJ, ShiCB, Precipitation behavior of carbides in high-carbon martensitic stainless steel. Int J Mater Res. 2016;108:20–28. doi: 10.3139/146.111447
4.
InoueA, MasumotoT.Carbide reactions (M3C→M7C3→M23C6→M6C) during tempering of rapidly solidified high carbon Cr-W and Cr-Mo steels. Metall Trans A. 1980;11(5):739–747. doi: 10.1007/BF02661203
5.
LewisMH, HattersleyB.Precipitation of M23C6 in austenitic steels. Acta Metall. 1965;13(11):1159–1168. doi: 10.1016/0001-6160(65)90053-2
6.
WiengmoonA, ChairuangsriT, PearceJTH.A microstructural study of destabilised 30wt% Cr-2.3 wt% C high chromium cast iron. ISIJ Int. 2004;44(2):396–403. doi: 10.2355/isijinternational.44.396
7.
WiengmoonA, ChairuangsriT, BrownA, Microstructural and crystallographical study of carbides in 30wt.% Cr cast irons. Acta Mater. 2005;53(15):4143–4154. doi: 10.1016/j.actamat.2005.05.019
8.
WiengmoonA, ChairuangsriT, PoolthongN, Electron microscopy and hardness study of a semi-solid processed 27 wt% Cr cast iron. Mater Sci Eng A. 2008;480(1-2):333–341. doi: 10.1016/j.msea.2007.07.043
9.
WangJ, LiC, LiuH, The precipitation and transformation of secondary carbides in a high chromium cast iron. Mater Charact. 2006;56(1):73–78. doi: 10.1016/j.matchar.2005.10.002
10.
HashemiN, MertensA, MontrieuxHM, Oxidative wear behaviour of laser clad high speed steel thick deposits: Influence of sliding speed, carbide type and morphology. Surf Coat Tech. 2017;315:519–529. doi: 10.1016/j.surfcoat.2017.02.071
11.
VASP, Release 4.6. Computational Physics, Faculty of Physics. Austria: Universität Wien; 2013.
12.
KresseG, FurthmüllerJ.Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B. 1996;54(16):11169. doi: 10.1103/PhysRevB.54.11169
13.
KresseG, FurthmüllerJ.Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput Mater Sci. 1996;6(1):15–50. doi: 10.1016/0927-0256(96)00008-0
14.
KresseG, HafnerJ.Ab initio molecular dynamics for liquid metals. Phys Rev B. 1993;47(1):558. doi: 10.1103/PhysRevB.47.558
15.
Thermo-Calc, Release 7.0. Thermo-Calc Software AB, Stockholm, Sweden, 2017.
16.
Cutlery and Allied Trades Research Association (CATRA) of Sheffield England. Materials and articles in contact with foodstuffs – Cutlery and table hollowware – Part 5: Specification for sharpness and edge retention test of cutlery. Switzerland; 2004. Standard No. ISO 8442-5: 2004(E).
17.
PughSFXCII.Relations between the elastic moduli and the plastic properties of polycrystalline pure metals. Philos Mag. 1954;45(367):823–843. doi: 10.1080/14786440808520496
18.
ZhouW, LiuLJ, LiBL, Structural, elastic and electronic properties of intermetallics in the Pt-Sn system: a density functional investigation. Comput Mater Sci. 2009: 46(4):921–931.
JackDH, JackKH.Invited review: carbides and nitrides in steel. Mater Sci Eng. 1973;11(1):1–27. doi: 10.1016/0025-5416(73)90055-4
21.
MorniroliJP, KhachfiM, CourtoisA, Observations of non-periodic and periodic defect structures in M7C3 carbides. Philos Mag A. 1987;56(1):93–113. doi: 10.1080/01418618708204469
22.
CarpenterSD, CarpenterDEOS, PearceJTH.The nature of stacking faults within iron-chromium carbide of the type (Fe,Cr)7C3. J Alloy Compd. 2010;494(1-2):245–251. doi: 10.1016/j.jallcom.2009.12.197
23.
WangJD, GuoW, SunH, Plastic deformation behaviors and hardening mechanism of M7C3 carbide. Mat Sci Eng A. 2016;662:88–94. doi: 10.1016/j.msea.2016.03.062
24.
ShiCB, ZhuQT, YuWT, Effect of oxide inclusions modification during electroslag remelting on primary carbides and toughness of a high-carbon 17 mass% Cr tool steel. J Mater Eng Perform. 2016;25(11):4785–4795. doi: 10.1007/s11665-016-2361-4
