Different Cr–TiO2 nanocomposite photoelectrodes were fabricated by in situ anodisation of titanium in a single step process using potassium chromate as the chromium source. The morphology and structure were characterised by field emission scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy. Optical properties were investigated by UV–Vis diffuse reflectance spectra. The visible light photocatalytic activity of the Cr–TiO2 nanocomposite photoelectrodes was evaluated by measuring the degradation of rhodamine B dye under visible light irradiation. The results showed that Cr–TiO2 nanocomposite electrodes have excellent photocatalytic performance. Cr–TiO2 nanocomposite produced using 5 mM K2CrO4 exhibited better photocatalytic activity than did the pure TiO2 and Cr–TiO2 nanocomposite fabricated using other chromium concentrations. The anodisation process developed in this study is facile, reproducible and inexpensive and can be easily scaled up, thereby pioneering the fabrication of high performance photocatalysts with promising environmental applications.
PaolaA. D., Garcia-LopezE., MarciG. and PalmisanoL.: ‘A survey of photocatalytic materials for environmental remediation’, J. Hazard. Mater., 2012, 211, 3–29. doi: 10.1016/j.jhazmat.2011.11.050
2.
ZhangQ., XuH. and YanW.: ‘Fabrication of a composite electrode: CdS decorated Sb-SnO2/TiO2-NTs for efficient photoelectrochemical reactivity’, Electrochim. Acta, 2012, 61, 64–72. doi: 10.1016/j.electacta.2011.11.084
3.
WuD. Y. and LongM. C.: ‘‘Low-temperature synthesis of N-TiO2 sol and characterization of N-TiO2 coating on cotton fabrics’, Surf. Coat. Technol., 2012, 206, 3196–3200. doi: 10.1016/j.surfcoat.2012.01.002
4.
WangC. Y., LiJ., CaiS. Y., NingZ. J., ZhaoD. M., ZhangQ. and SuJ. H.: ‘‘Performance improvement of dye-sensitizing solar cell by semi-rigid triarylamine-based donors’, Dyes Pigm., 2012, 94, 40–48. doi: 10.1016/j.dyepig.2011.11.002
5.
GaneshV. A., NairA. S., RautH. K., WalshT. M. and RamakrishnaS.: ‘Photocatalytic superhydrophilic TiO2 coating on glass by electrospinning’, RSC Adv., 2012, 2, 2067–2072. doi: 10.1039/c2ra00921h
6.
NawiM. A. and ZainS. M.: ‘Enhancing the surface properties of the immobilized Degussa P-25 TiO2 for the efficient photocatalytic removal of methylene blue from aqueous solution’, Appl. Surf. Sci., 2012, 258, 6148–6157. doi: 10.1016/j.apsusc.2012.03.024
7.
LiS. and FuJ.: ‘‘Improvement in corrosion protection properties of TiO2 coatings by chromium doping’, Corros. Sci., 2013, 68, 101–110. doi: 10.1016/j.corsci.2012.10.040
8.
KhanM., CaoW., ChenN. and IqbalA. M. Z.: ‘‘Ab-initio calculations of synergistic chromium-nitrogen codoping effects on the electronic and optical properties of anatase TiO2’, Vacuum, 2013, 92, 32–38. doi: 10.1016/j.vacuum.2012.11.016
9.
ZhuH., TaoJ. and DongX.: ‘‘Preparation and photoelectrochemical activity of Cr-doped TiO2 nanorods with nanocavities’, J. Phys. Chem. C, 2010, 114C, 2873–2879. doi: 10.1021/jp9085987
10.
LiJ., YunH. and LinC. J.: ‘Investigations on the Fe-doped TiO2 nanotube arrays as a photoanode for cathodic protection of stainless steel’, ECS Trans., 2008, 3, 1–9. doi: 10.1149/1.2838448
11.
SunS., DingJ. J., BaoJ., GaoC., QiZ. M., YangX. Y., HeB. and LiC. X.: ‘Photocatalytic degradation of gaseous toluene on Fe-TiO2 under visible light irradiation: a study on the structure, activity and deactivation mechanism’, Appl. Surf. Sci., 2012, 258, 5031–5037. doi: 10.1016/j.apsusc.2012.01.075
12.
KhaleelA., ShehadiI. and Al-ShamisiM.: ‘‘Structural and textural characterization of sol-gel prepared nanoscale titanium-chromium mixed oxides’, J. Non-Cryst. Solids, 2010, 356, 1282–1287. doi: 10.1016/j.jnoncrysol.2010.04.031
13.
GhasemiS., RahimnejadS., Rahman SetayeshS., RohaniS. and GholamiM. R.: ‘Transition metal ions effect on the properties and photocatalytic activity of nanocrystalline TiO2 prepared in an ionic liquid’, J. Hazard. Mater., 2009, 172, 1573–1578. doi: 10.1016/j.jhazmat.2009.08.029
14.
LopezR., GomezR. and Oros-RuizS.: ‘Photophysical and photocatalytic properties of TiO2-Cr sol-gel prepared semiconductors’, Catal. Today, 2011, 166, 159–165. doi: 10.1016/j.cattod.2011.01.010
15.
BarkaN., QourzalS., AssabbaneA., NounahA. and Ait-IchouY.: ‘Factors influencing the photocatalytic degradation of Rhodamine B by TiO2-coated non-woven paper’, J. Photochem. Photobiol. A, 2008, 195A, 346–351. doi: 10.1016/j.jphotochem.2007.10.022
16.
LvK., LiJ., QingX., LiW. and ChenQ.: ‘Synthesis and photo-degradation application of WO3/TiO2 hollow spheres’, J. Hazard. Mater., 2011, 189, 329–335. doi: 10.1016/j.jhazmat.2011.02.038
17.
Ramos-DelgadoN. A., Gracia-PinillaM. A., Maya-TrevinoL., Hinojosa-ReyesL., Guzman-MarJ. L. and Hernandez-RamirezA.: ‘Solar photocatalytic activity of TiO2 modified with WO3 on the degradation of an organophosphorus pesticide’, J. Hazard. Mater., 2013, 263, 36–44. doi: 10.1016/j.jhazmat.2013.07.058
18.
PanC. C. and WuJ. C. S.: ‘Visible-light response Cr-doped TiO2(xNx photocatalysts’, Mater. Chem. Phys., 2006, 100, 102–107. doi: 10.1016/j.matchemphys.2005.12.013
19.
TianB., LiC. Z. and ZhangJ.: ‘One-step preparation, characterization and visible-light photocatalytic activity of Cr-doped TiO2 with anatase and rutile bicrystalline phases’, Chem. Eng. J., 2012, 191, 402–409. doi: 10.1016/j.cej.2012.03.038
20.
IlievV., TomovaD., RakovskyS., EliyasA. and Li PumaG.: ‘Enhancement of photocatalytic oxidation of oxalic acid by gold modified WO3/TiO2 photocatalysts under UV and visible light irradiation’, J. Mol. Catal. A: Chem., 2010, 327, 51–57. doi: 10.1016/j.molcata.2010.05.012
21.
MomeniM. M., GhayebY. and DavarzadehM.: ‘‘Single-step electrochemical anodization for synthesis of hierarchical WO3-TiO2 nanotube arrays on titanium foil as a good photoanode for water splitting with visible light’, J. Electroanal. Chem., 2015, 739, 149–155. doi: 10.1016/j.jelechem.2014.12.030
