Highly crystalline cadmium doped lead sulphide (PbS:Cd) thin films with different Cd doping concentrations (0, 2, 4, 6 and 8 at-%) were fabricated on glass substrates using spray pyrolysis technique. The X-ray diffraction (XRD) studies revealed that all the films exhibit face centred cubic structure with a preferential orientation along the (2 0 0) plane irrespective of Cd doping concentration. Optical studies showed that the band gap of doped films vary between 1·96 and 2·12 eV with increasing Cd content and the film coated with 6 at-% Cd dopant has a maximum transmittance of nearly equal to 77%. Electrical studies revealed that the film coated with 6 at-%Cd dopant has a maximum conductivity of 12·67×10−1 Ω cm−1. The obtained results infer that the PbS:Cd film coated with 6 at-%Cd dopant has better structural, morphological, optical and electrical properties.
ColvinL, SchlampMC and AlivisatosAP: ‘Light emitting diodes made from cadmium selenide’, Nature, 1994, 370, 354–357.
2.
KelvinDL, RothR, LimAKL, AlivisatosAP and MeEuenPL: ‘Nanogap resistance random access memory based on natural aluminium oxide’, Nature, 1997, 389, 699–701.
3.
RidleyBA, NiviB and JacobsonJM: ‘All-inorganic field effect transistors fabricated by printing’, Science, 1999, 286, 746–749.
4.
GodeF, GuneriE, EmanFM, Emir KafadarV and UnluS: ‘Synthesis, structural, optical, electrical and thermoluminescence properties of chemically deposited PbS thin films’, J. Luminescence, 2014, 147, 41–48.
5.
WangY, SunaA, MahlerW and KasowskiR: ‘PbS in polymers. From molecules to bulk solids’, J. Chem. Phys., 1987, 87, 7315–7319.
NandaKK, KruisFE, FissanH and AcetM: J. Appl. Phys., 2002, 91, 2315– 2319.
10.
PentialE, PintilieL, BotilaT, PintilieI, ChaparroA and MaffiottC: ‘Bi influence on growth and physical properties of chemical deposited PbS films’, Thin Solid Films, 2003, 434, 162–170.
11.
GeethuR, JacobR, ShripathiT, OkramGS, GanesanV, TripathiS, FatimaA, SreenivasanPV, UrmilaKS, PradeepB and PhilipRR: ‘Optoelectronic and thermoelectric properties of Ga-doped β-PbS2 nanostructured thin films’, Appl. Surf. Sci., 2012, 258, 6257–6260.
12.
DasR and Rajesh Kumar: ‘Preparation of nanocrystalline PbS thin films and effect of Sn doping and annealing on their structural and optical properties’, Mater. Res. Bull., 2012, 47, 239–246.
13.
PreethaKC and RamadeviTL: ‘Effect of Al incorporation on the structural, morphological, optoelectronic and transport properties of PbS thin films’, Physica B, 2012, 407B, 4173–4181.
14.
WilsonKC, ManikandanE, Basheer AhamedM and MwakikungaBW: ‘Nanocauliflower like structure of CdS thin film for solar cell photovoltaic applications: In situ tin doping by chemical bath deposition technique’, J. Alloys Compd, 2014, 585, 555–560.
15.
KrishnakumarV, RamamurthiK and ElangovanE: ‘Preparation of (CdO)1−x(PbO)x and (CdS)1−x(PbS)x thin films by spray pyrolysis technique and their characterization’, Solid State Commun., 2004, 32, 673–677.
16.
MohammedMA, MousaAM and PonponJP: ‘Optical and optoelectric properties of PbCdS ternary thin films deposited by CBD’, J. Semicond. Technol. Sci., 2009, 9, 117–123.
17.
ThangavelS, GanesanS and SaravananK: ‘Annealing effect of cadmium in situ doping of chemical bath deposited PbS thin films’, Thin Solid Films, 2012, 520, 5206–5210.
18.
SuhailMH: ‘Structural and optical properties of ZnS, PbS, Zn1−xPbxS, ZnxPb1−xS and PbZnxS1−x thin films’, Indian J. Pure Appl. Phys., 2012, 50, 380–386.
19.
SuganyaM, BaluAR and UsharaniK: ‘Role of substrate temperature on the growth mechanism and physical properties of spray deposited lead oxide thin films’, Mater. Sci.-Poland, 2014, 32, 448–456.
20.
SeghaierS, KamounN, BriniR and AmaraAB: ‘Structural and optical properties of PbS thin films deposited by chemical bath deposition’, Mater. Chem. Phys., 2006, 997, 71–80.
21.
RanieroL, FerreiraCL, CruzLR, PintoAL and AlvesRMP: ‘Activation in PbS thin films grown at room temperature by chemical bath deposition’, Physica B, 2010, 405B, 1283–1286.
22.
SivaramanT, BaluAR and NagarethinamVS: ‘Effect of magnesium incorporation on the structural, morphological, optical and electrical properties of CdS thin films’, Mater. Sci. Semicond. Process., 2014, 27, 915–923.
23.
BaluAR, NagarethinamVS, ThayumanavanA, MuraliKR, SanjeevirajaC and JayachandranM: ‘Effect of thickness on the microstructural optoelectronic and morphological properties of electron beam evaportated ZnTe films’, J. Alloys Compd, 2010, 502, 434–438.
24.
ChoudhuryN and SarmaBK: ‘Structural characterization of lead sulfide thin films by means of X-ray line profile analysis’, Bull. Mater. Sci., 2009, 32, 43–47.
25.
AbbasMM, ShehabAAb-M, HassanNA and Al-SamuraeA-K: ‘Effect of temperature and deposition time on the optical properties of chemically deposited nanostructured PbS thin films’, Thin Solid Films, 2011, 519, 4917–4922.
26.
WangYX, DingX, ChengY, ZhangYJ, YangLL, LiuHL, FanHG, LiuY and YangJH: ‘Properties of Co-doped ZnO thin films by electrochemical deposition’, Cryst. Res. Technol., 2009, 44, 517–520.
27.
DuttaS, ChattopadhyayS, SutradharM, SarkarA, ChakrabartiM, SanyalD and JanaD: ‘Defects and optical absorption in nanocrystalline ZnO’, J. Phys. Cond. Matter., 2007, 19, 236218–236223.
28.
GodeF, GuneriE, EmenFM, Emir KafadarV and UnluS: ‘Synthesis, structural, optical, electrical and thermoluminescence properties of chemically deposited PbS thin films’, J. Luminescence, 2014, 147, 41–48.
29.
SrikantV and ClarkDR: ‘Optical absorption edge of ZnO thin films: the effect of substrate’, J. Appl. Phys., 1997, 81, 6357–6364.
30.
SalimSM and HamidO: ‘Growth and characterization of lead sulfide films deposited on glass substrates’, Renew. Energy, 2001, 24, 575–580.
