In this work, sol–gel derived bioactive glass/zirconium titanate coatings were uniformly deposited on stainless steel orthopaedic implants, by using carboxymethyl cellulose as a particulate dispersant in the sol. The surface features, wetting, and in vitro electrochemical corrosion behaviour of the coated samples were evaluated. It was found that, by applying the coating on the substrate, the water contact angle was decreased, which is indicative of an improvement in the implant hydrophilicity. Also, the coating improved the corrosion resistance of the metallic implant, as realised by an increase in the corrosion potential and a decrease in the corrosion current density. Indeed, this coating acted as a physical protective barrier which retards the electrolyte access to the metal surface and thereby electrochemical processes.
KaurG, PandeyOP, SinghK, HomaD, ScottB and PickrellG: ‘A review of bioactive glasses: their structure, properties, fabrication, and apatite formation’, J. Biomed. Mater. Res. Part A, 2014, 102A, 254–274.
2.
JulianRJ: ‘Review of bioactive glass: from Hench to hybrids’, Acta Biomater., 2013, 9, 4457–4486.
3.
KamalianR, YazdanpanahA, MoztarzadehF, RavarianR, MoztarzadehZ, TahmasbiM and MozafariM: ‘Synthesis and characterization of bioactive glass/forsterite nanocomposites for bone implants’, Ceram. Silik., 2012, 56, 331–340.
4.
ShtanskyDV, PetrzhikMI, BashkovaIA, Kiryukhantsev-KorneevFV, SheveikoAN and LevashovEA: ‘Adhesion, friction, and deformation characteristics of Ti–(Ca,Zr)–(C,N,O,P) coatings for orthopedic and dental implants’, Phys. Solid State, 2006, 48, 1301–1308.
5.
SalahinejadE, HadianfardMJ, MacdonaldDD, Sharifi-AslS, MozafariM, WalkerKJ, Tahmasbi RadA, MadihallySV, VashaeeD and TayebiL: ‘Surface modification of stainless steel orthopedic implants by sol–gel ZrTiO4 and ZrTiO4–PMMA coatings’, J. Biomed. Nanotechnol., 2013, 9, 1327–1335.
6.
DeviKB, SinghK and RajendranN: ‘Sol–gel synthesis and characterisation of nanoporous zirconium titanate coated on 316L SS for biomedical applications’, J. Sol–gel Sci. Technol., 2011, 59, 513–520.
7.
MozafariM, SalahinejadE, MacdonaldDD, ShabafroozV, YazdiMamaghaniM, VashaeeD and TayebiL: ‘Multilayer bioactive glass/zirconium titanate thin films for bone tissue engineering and regenerative dentistry’, Int. J. Nanomed., 2013, 8, 1665–1672.
8.
KokuboT and TakadamaH: ‘How useful is SBF in predicting in vivo bone bioactivity?’, Biomaterials, 2006, 27, 2907–2915.
9.
MorrisonDI and RossS: ‘Colloidal dispersions’; 2002, New York, Wiley Interscience.
10.
SalahinejadE, HadianfardMJ, MacdonaldDD, MozafariM, VashaeeD and TayebiL: ‘Zirconium titanate thin film prepared by an aqueous particulate sol–gel spin coating process using carboxymethyl cellulose as dispersant’, Mater. Lett., 2012, 88, 5–8.
11.
RouhaniP., SalahinejadE., KaulR., VashaeeD. and TayebiL., ‘Nanostructured zirconium titanate fibers prepared by particulate sol-gel and cellulose templating techniques’, J. Alloys Compd, 2013, 568, 102–105.
12.
SalahinejadE, HadianfardMJ, VashaeeD and TayebiL: ‘Effect of precursor solution pH on the structural and crystallization characteristics of sol–gel derived nanoparticles’, J. Alloys Compd, 2014, 589, 182–184.
13.
SalahinejadE, HadianfardMJ, MacdonaldDD, KarimiI, VashaeeD and TayebiL: ‘Aqueous sol–gel synthesis of zirconium titanate (ZrTiO4) nanoparticles using chloride precursors’, Ceram. Int., 2012, 38, 6145–6149.
14.
SalahinejadE, HadianfardMJ, MacdonaldDD, MozafariM, VashaeeD and TayebiL: ‘Multilayer zirconium titanate thin films prepared by a sol–gel deposition method’, Ceram. Int., 2013, 39, 1271–1276.
15.
MabbouxF, PonsonnetL, MorrierJJ, JaffrezicN and BarsottiO: ‘Surface free energy and bacterial retention to saliva-coated dental implant materials—an in vitro study’, Colloids Surf. B, 2004, 39B, 199–205.
16.
Amadeu do SerroAPV, FernandesAC, de JesusB and SaramagoV: ‘The influence of proteins on calcium phosphate deposition over titanium implants studied by dynamic contact angle analysis and XPS’, Colloids Surf. B, 1997, 10B, 95–104.
17.
SakaiN, FujishimaA, WatanabeT and HashimotoK: ‘Enhancement of the photoinduced hydrophilic conversion rate of TiO2 film electrode surfaces by anodic polarization’, J. Phys. Chem. B, 2001, 105B, 3023–3026.
18.
AbdulmajeedAA, LassilaLV, VallittuPK and NarhiTO: ‘The effect of exposed glass fibers and particles of bioactive glass on the surface wettability of composite implants’, Int. J. Biomater., 2011, 2011, 607971.
19.
ParkJ and LakesRS: ‘Biomaterials: an introduction’; 2007, New York, Springer Science-Business Media, LLC.
20.
SalahinejadE, HadianfardMJ, MacdonaldDD, Sharifi-AslS, MozafariM, WalkerKJ, Tahmasbi RadA, MadihallySV and TayebiL: ‘In vitro electrochemical corrosion and cell viability studies on nickel-free stainless steel orthopedic implants’, PLOS ONE, 2013, 8, 1–8.
21.
MudaliUK, SridharTM and RajB: ‘Corrosion of bio implants’, Sadhana, 2003, 28, 601–637.
22.
SalahinejadE, HadianfardMJ, MacdonaldDD, MozafariM, VashaeeD and TayebiL: ‘A new double-layer sol–gel coating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid’, Mater. Lett., 2013, 97, 162–165.
23.
SalahinejadE, HadianfardMJ, VashaeeD and TayebiL: ‘Influence of annealing temperature on the structural and anti-corrosion characteristics of sol–gel derived, spin-coated thin films’, Ceram. Int., 2014, 40, 2885–2890.
